The Transactions of the Korean Institute of Power Electronics (전력전자학회논문지)

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Feedforward Compensation Method of IPMSM for EV with Non-sinusoidal BEMF

비 정현파 역기전압을 가지는 EV용 IPMSM의 전향보상 제어기법에 관한 연구

  • Received : 2013.07.18
  • Accepted : 2013.10.10
  • Published : 2013.12.20
Download PDF
⟨ Previous Next ⟩

Abstract

In the case of the Back EMF voltage contains the harmonics, the motor torque ripple and vibration is occurred by the current pulsation, because IPMSM control algorithm is the model which is assumed that it contains a sinusoidal Back EMF voltage. To improve ride quality, in the case of IPMSM for EV, improving the torque control characteristics is necessary. Therefore, there is a need to minimize the influence of the harmonics. In this paper, the investigation to decrease the current distortion factor has been performed for improving torque control characteristics by applying the non-sinusoidal Back EMF to IPMSM model.

Keywords

References

  1. In-Pyo Hong, "A Study of torque ripple minimization and maximum torque control for IPMSM with non sinusoidal back-EMF," Pusan National University School of Electrical Engineering Master of Engineering thesis., 2002.
  2. Sanghun Kim, "DC, AC, BLDC Motor Control," Bookdo publishing company, 2012.
  3. Kim ki chan, "A Analysis on the characteristic of Interior Permanent Magnet Synchronous Motor at Maximum speed," Dept. of Electrical Engineering Graduate School of Industry Hanbat National University, 2013.
  4. Shigeo Morimoto, "Wide-Speed Operation of Interior Permanent Magnet Synchronous Motors with Hight-Performance Current Regulator," IEEE, Vol. 30, No. 4, 1994.
  5. T. M. Jahns, "Flux-weakening Regime Operation of an Interior Permanent-magnet Synchronous Motor Drive," IEEE Trans. On Industry Applications, IA-23, No. 4, pp. 681-689, 1987. https://doi.org/10.1109/TIA.1987.4504966
  6. J. H. Hung, ZDing, "Design of Currents to reduce torque ripple in brushless Permanent Motor," IEEE Proceedings, Vol. 140, No. 4, 1993.
  7. Takayuki Miyajima, Hiroshi Fujimoto, Masami Fujitsuna. "Field-Weakening Control for SPMSM Based on Final-State Control Considering Voltage Limit," KIPE, ICPE 2011-ECCE Asia, pp. 1392-1397, May 2011.
  8. Ki-Hong Park, Tae-Sung Kim, Kyung-Hwa Kim, Dong-Seok Hyun. "A Study on the Speed Control of BLDC Motor Using the Feedforward Compensation," 2003 Power Electronics Annual Conference, pp. 663-666, July 2003.