• 한국도로학회논문집
• /
• 제9권2호
• /
• pp.115-127
• /
• 2007

최근 도로선진국이라 할 수 있는 나라들에서는 다양한 도로사업의 발굴 및 장려정책이 도입되고 있다. 본 논문에서는 새로운 도로사업의 발굴을 위한 대안모형을 제시하였다. 새로운 도로사업 발굴을 위한 절차로는 근거법령의 모색 신개념 도로사업의 발굴, 평가 모형구축 및 운영지침 개발, 관련행정체계 개선 등 크게 4가지의 주요 절차가 필요한 것으로 제시되었다. 근거법령의 모색은 도로법 및 도로법 시행령, 시행규칙 등이 우선 고려되어야 할 것으로 분석되었으며 신개념의 도로사업 발굴절차는 크게 국가적 차원의 유일성 확보 도로, 다양한 가치기준에 의해 선정되는 도로 및 단일시설, 기술(설계 우수VE 및 LCCA사례 포함) 및 구조물 형태로서 발굴될 수 있는 사례로 세분류하였다. 평가모형 구축 및 운영지침 개발절차에서는 미국 NSBP프로그램의 절차 혹은 지속가능한 도시대상의 절차를 사례로 할 수 있으며 분석적 계층화법(AHP) 및 다지역산업연관모형(MRIO)의 적용가능성도 제시하였다. 또한, 관련 행정체계의 개선에서는 건설교통부의 도로기획관실 업무내역 분석을 통해 도로정책팀과 도로환경팀의 역할을 제시하였으며 평가위원회의 구성, 평가과정과 일체화된 예산지원절차를 추진방안으로 제시하였다.

• 한국CDE학회논문집
• /
• 제18권1호
• /
• pp.58-70
• /
• 2013

This study for establishing specific standards of atrium design aims to discuss design of atrium to consider energy performance atrium in office buildings. In order to evaluate a type and a scale of atrium at the early design stage, modeling details of mass design were set as standards of conceptual design. In the experiment, Project Vasari was used to analyze modeling and energy consumption, based on the LOD 100-step suggested by AIA, because there is no guideline to specify a level of modeling details at each design process. From this analysis, the correlation among a simple-typed atrium and scale and energy load was considered. The result of this research is as follows: First, the single-sided atrium reduced energy the most, and it was followed by three-sided, two-sided, four-sided and continuous-typed ones. On the whole, they could decrease energy by up to about 15%. Also, the atrium with a wide facade facing in the south was more favorable to reduce energy. Second, planning the atrium within 10~30% of the whole building area was more energy efficient. Third, rather than the depth, adjusting the length in designing an atrium could reduce cooling and heating loads by 1.5% per 1m. As explained above, energy performance evaluation considering types and planning elements of atrium helps to assess alternatives in a reasonable way. In particular, considering the use of building needs to be preceded to select a type of atrium, although it is also important to consider its planning elements.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.422-427
• /
• 2003

Rhodopseudomonas palustris P4 can produce $H_2$ either from CO by water-gas shift reaction or from various sugars by anaerobic fermentation. Fermentative $H_2$ production by P4 is fast, but its yield is relatively low due to the formation of various organic acids. In order to increase $H_2$ production yield from glucose, P4 was investigated for the photo-fermentation of acetate which is a major by-product of fermentative $H_2$ production. Experiments were performed in batch modes using both light-grown and dark-grown cells. When the dark-grown P4 was challenged with light and acetate, $H_2$ was produced with the consumption of acetate after a lag period of 25 h. $H_2$ production was inhibited when a nitrogen source, especially ammonium, is present. When the dark-fermentation broth containing acetate was adopted for photo-fermentation with light-grown cells, $H_2$ production and concomitant acetate consumption occurred without a lag period. The $H_2$ yield was estimated as 2.4 - 2.8 mol $H_2/mol$ acetate and the specific $H_2$ production rate was as 9.8 ml $H_2/g$ cell${\cdot}$h, The fact that a single strain can perform both dark- and light-fermentation gives a great advantage in process development Compared to a one-step dark-fermentation, the combined dark- and light-fermentation can increase the $H_2$ production yield on glucose by two-fold.

• 한국진공학회지
• /
• 제14권1호
• /
• pp.35-39
• /
• 2005

본 실험에서는 단위요소 사이에 채널을 갖는 Elementwise Patterned Stamp (이하 EPS)를 이용하여 싱글스탭 (single step)으로 4인치 웨이퍼를 임프린트 하는 공정을 수행하였다. 단위요소간의 간격이 3m인 EPS를 이용한 임프린트에서 50 - 100nm급의 패턴을 성공적으로 형성하였다. 그러나 임프린트 과정 중 EPS의 채널 부분에서 웨이퍼의 미소변형이 발생하여 단위요소의 미충전과 불균일한 잔여층이 형성되는 문제들이 발생하였다. 본 논문에서는 이러한 웨이퍼의 미소변형이 단위요소 충전과 패턴형성에 미치는 영향을 확인해 보기 위해 웨이퍼의 두께를 100 - 500㎛로 변화시켜가며 임프린트 실험을 수행하였고, 유한요소법(Finite Element Method, FEM)을 이용한 수치모사를 통하여 실험결과를 확인하였다. 또한 웨이퍼의 미소변형이 발생하는 또 다른 요인인 EPS의 채널 폭을 3mm, 2mm, 1mm로 변화시키며 수행한 수치모사를 통하여 안정된 임프린트 조건을 제시하였다.

• 한국멀티미디어학회논문지
• /
• 제12권4호
• /
• pp.512-520
• /
• 2009

최대 휘소 투영(MIP) 볼륨 가시화는 의료기기 등에서 생성된 삼차원 영상 데이터로부터 관찰자가 바라보는 방향으로 최대값을 추출하여 영상을 생성하는 가시화 기법이다. MIP는 조영된 혈관 같은 높은 밀도의 구조를 가려짐 없이 드러내어 의료 영상 등에서 많이 사용된다. 본 연구는 두 단계의 가속화 방법을 제안하여 상용 CPU에서 고속으로 MIP를 수행할 수 있도록 한다. 먼저, 기존 MIP 알고리즘이 다수의 조건 분기 명령으로 구성된다는 것에 착안하여, 상용 CPU에서 제공하는 단일 명령 복수 데이터(single instruction multiple data: SIMD) 연산으로 조건 분기 명령을 제거한다. 많은 시간이 소요되는 조건 분기 명령을 제거하여 가시화 속도가 향상된다. 또한 본 연구는 메모리 참조가 순차적으로 발생하도록 알고리즘을 구성한다, 기존 가시화 방법에서 영상과 객체의 메모리 참조가 무작위로 발생하여 발생하던 속도 저하 문제를 완화시킨다. 두 가지 제안 방법을 통해 기존의 쉬어-왑 볼륨 가시화 기법에 비해 7배 이상의 성능 향상을 얻는다.

• BMB Reports
• /
• 제33권4호
• /
• pp.294-299
• /
• 2000

Proteolytic processing of the dengue virus serotype 2 polyprotein precursor is catalyzed by a host signal peptidase and a virus encoded two-component protease consisting of the nonstructural proteins, NS2B and NS3. We expressed in Escherichia coli the NS2B, NS3(pro) and NS2B-NS3 proteins from the dengue virus type 2 strain 16681 as N-terminal fusions with a hexahistidine affinity tag under the control of the inducible trc promoter. All fusion proteins were purified to >90% purity by detergent extraction of inclusion bodies and a single step metal chelate chromatography. Proteins were refolded on-column and recovered with yields of 0.5, 6.0 and 1.0 mg/l of E. coli culture that was grown to $OD_{600}=1.0$ for NS2B, NS3(pro) and NS2B-NS3, respectively. Purified proteins gave strong signals in Western blots using $Ni^{2+}-nitrilotriacetic$ acid as a probe for the presence of the polyHis tag. During the purification process, $(His)_{6}NS2B-NS3$ was apparently not autoproteolytically cleaved at the NS2B/NS3 site.

• 대한환경공학회지
• /
• 제39권8호
• /
• pp.489-493
• /
• 2017

미생물연료전지는 하폐수에 존재하는 다양한 유기성물질을 전기에너지로 변환시킬 수 있는 생물전기화학적공정이다. 본 연구에서는 전산모사를 통하여 산화전극의 크기, 전극간 거리, 전체 산화전극면적이 기질분해에 미치는 영향을 알아보고자 하였다. 생활하수를 처리하는 다중산화전극 및 SPA (Spaced electrode assembly)형 연속식 미생물연료전지공정을 모사하였으며, 전산모사결과에 따르면 단일전극의 크기에 의한 영향보다는 전극간 거리가 짧을수록 기질분해속도가 빠른 것으로 나타났다. 특히 전체 산화전극의 면적이 큰 경우가 기질분해가 가장 빠른 것으로 나타났다. 본 연구를 통하여 미생물연료전지공정의 설계에 있어서 율속단계로 알려진 환원전극의 크기 외에도 산화전극의 크기 및 전극간 거리 또한 기질분해 속도에 영향을 미칠 수 있는 중요한 인자임을 알 수 있었다.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.498-502
• /
• 2010

Aluminium titanate($Al_2TiO_5$) has extremely anisotropic thermal expansion properties in single crystals, and polycrystalline material spontaneously microcracks in the cooling step after sintering process. These fine intergranular cracks limit the strength of the material, but provide an effective mechanism for absorbing strain energy during thermal shock and preventing catastrophic crack propagation. Furthermore, since machinable BN-ceramics used as an insulating substrate in current micro-electronic industry are very expensive, the development of new low-cost machinable substrate ceramics are consistently required. Therefore, cheap $Al_2TiO_5$-machinable ceramics was studied for the replacement of BN ceramics. $Al_2O_3-Al_2TiO_5$ ceramic composite was fabricated via in-situ reaction sintering. $Al_2O_3$ and $TiO_2$ powders were mixed with various mol-ratio and sintered at 1400 to $1600^{\circ}C$ for 1 h. Density, hardness and strength of sintered ceramics were systematically measured. Phase analysis and microstructures were observed by XRD and SEM, respectively. Machinability of each specimens was tested by micro-hole machining. The results of research showed that the $Al_2TiO_5$-composites could be used for low-cost machinable ceramics.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권2호
• /
• pp.65-73
• /
• 2014

An overall responding security-centered framework is necessary required for infringement accidents, failures, and cyber threats. On the other hand, the correspondence structures of existing administrative, technical, physical security have weakness in a system responding to complex attacks because each step is performed independently. This study will recognize all internal and external users as a potentially threatening element. To perform connectivity analysis regarding an action, an intelligent convergence security framework and road map is suggested. A suggested convergence security framework was constructed to be independent of an automatic framework, such as the conventional single solution for the priority defense system of APT of the latest attack type, which makes continuous reputational attacks to achieve its goals. This study suggested the next generation convergence security framework to have preemptive responses, possibly against an APT attack, consisting of the following five hierarchical layers: domain security, domain connection, action visibility, action control, and convergence correspondence. In the domain, the connection layer suggests a security instruction and direction in the domains of administrative, physical and technical security. The domain security layer has consistency of status information among the security domain. A visibility layer of an intelligent attack action consists of data gathering, comparison and decision cycle. The action control layer is a layer that controls the visibility action. Finally, the convergence corresponding layer suggests a corresponding system of before and after an APT attack. The administrative security domain had a security design based on organization, rule, process, and paper information. The physical security domain is designed to separate into a control layer and facility according to the threats of the control impossible and control possible. Each domain action executes visible and control steps, and is designed to have flexibility regarding security environmental changes. In this study, the framework to address an APT attack and load map will be used as an infrastructure corresponding to the next generation security.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.160-160
• /
• 2010

Organic electronic devices require a passivation layer to ensure sufficient lifetime. Specifically, flexible organic electronic devices need a barrier layer that transmits less than $10^{-6}\;g/m^2/day$ of water and $10^{-5}\;g/m^2/day$ of oxygen. To increase the lifetime of organic electronic device, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. In this study, the passivation layer was deposited using single-process PEALD. The passivation layer, in our case, was a bilayer system consisting of $Al_2O_3$ films and a $TiO_2$ buffer layer on a poly (ether sulfon) (PES) substrate. Because the deposition temperature and plasma power have a significant effect on the properties of the passivation layer, the characteristics of the $Al_2O_3$ films were investigated in terms of density under different deposition temperatures and plasma powers. The effect of the $TiO_2$ buffer layer also was also addressed. In addition, the water vapor transmission rate (WVTR) and organic light-emitting diode (OLEDs) lifetime were measured after forming a bilayer composed of $Al_2O_3/TiO_2$ on a PES substrate.