• 한국재료학회지
• /
• 제4권4호
• /
• pp.459-465
• /
• 1994

a-측으로 배향된 $YBa_2Cu_3O_{7-\delta}$ 고온 초전도 박막을 $LaAIO_{3}$(100)단결정 기판에 이중 타게트 off-axis rf마그네트론 스퍼터링법으로 증착하였다. 박막은 기판온도(Ts)$590^{\circ}C$와 $680^{\circ}C$사이에서 단일공정으로 증착하는 one-step방법과, $590^{\circ}C$의 저온에서 a-축으로 배향된 YBCO박막(두께-30nm)을 면저 만들어 틀로 작용시킨 후 그 틀위에 나머지 부분을 기판온도를 승온하면서 증착하는 방법인 two-step방법 등 두 가지 방법을 사용하여 증착시켰다. one-step방법에서는 $T_s$가 증가함에 따라 감소하였으며, ($00 \ell$)피크는 증가하였다. Two-step방법으로 증착한 박막은 증착속도가 감소함에 따라 (h00)피크가 우세하게 나타났다. 박막의 미세구조는 a-축, c- 축 배향성이 혼재하여 핀홀과 같은 결함들이 생성되었다. 모든 경우 $T_s$가 감소함에 따라 a-축 배향성은 우세하였으나 전기적 특성은 저하되었고, 긴 전이온도 폭을 가졌다.

• Bulletin of the Korean Chemical Society
• /
• 제28권9호
• /
• pp.1467-1471
• /
• 2007

The green-emitting CeMgAl11O19:Tb (CMAT) phosphor has been prepared at 1200 °C by the simple solid-state reaction using AlF3 as a self-flux. This preparation temperature is much lower than those (1500-1700 °C) for conventional solid-state reaction and spray pyrolysis method. In particular, the complete process to produce high-quality phosphor particles was carried out through the single-step heat treatment of the mixture of corresponding oxide-type metal sources. An addition of AlF3 as a self-flux significantly decreased the crystallization temperature of CMAT with plate-like shape. The particle morphology could be controlled from plate-like to spherical by using H3BO3 as an additional flux. Thus, an optimal morphology and luminescence characteristics of CMAT were achieved when both AlF3 and H3BO3 fluxes were simultaneously used. Compared with conventional solid-state process, which is accompanied by the calcination step(s), and other alternative liquid solution techniques such as sol-gel method and spray pyrolysis, no use of active precursors and liquid media that are harmful to the environment is a distinctive advantage for the industrial purpose.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권2호
• /
• pp.246-251
• /
• 2014

In this paper, a high-speed CMOS Image Sensor (CIS) based on a 10-bit two step Single Slope A/D Converter (SS-ADC) is proposed. The A/D converter is composed of both 5-bit coarse ADC and a 6-bit fine ADC, and the conversion speed is 10 times faster than that of the single-slope A/D convertor. In order to reduce the pixel noise, further, a Hybrid Correlated Double Sampling (H-CDS) is also discussed. The proposed A/D converter has been fabricated with 0.13um 1-poly 4-metal CIS process, and it has a QVGA ($320{\times}240$) resolution. The fabricated chip size is $5mm{\times}3mm$, and the power consumption is about 35 mW at 3.3 V supply voltage. The measured conversion speed is 10 us, and the frame rate is 220 frames/s.

• 한국의류학회지
• /
• 제24권7호
• /
• pp.1025-1034
• /
• 2000

Cotton differs from polyester in physical and chemical properties. When cotton/polyester blends are dyed, water-soluble dyes are generally used for cotton and disperse dye for polyester. Thus, two bath or one bath-two step dyeing process are usually accepted. These processes consume more energy and cost compared to a single step process. To save energy and cost, a single step dyeing and finishing is carried out with disperse dyes in the presence of a crossslinking agent. K/S values of the dyed fabrics were determined to examine the dyeing property of cotton, cotton/polyester, polyester fabrics dyed with disperse dyes in the presence of DMDHEU/PEG. The concentration of DMDHEU, molecular weight and concentration of PEG, curing time and curing temperature were varied.

• 전자공학회논문지
• /
• 제50권11호
• /
• pp.64-69
• /
• 2013

본 논문에서는 10-bit 해상도의 Two-Step Single-Slope A/D 변환기를 이용한 고속 CMOS Image Sensor(CIS)를 제안하였다. 제안하는 A/D 변환기는 5-bit coarse ADC 와 6-bit fine ADC 로 구성되어 있으며, 기존의 Single-Slope A/D 변환기보다 10배 이상의 변환속도를 나타내었다. 또한 고속 동작에서 적은 노이즈 특성을 갖기 위해 Digital Correlated Double Sampling(D-CDS) 회로를 제안하였다. 설계된 A/D 변환기는 0.13um 1-poly 4-metal CIS 공정으로 제작되었으며 QVGA($320{\times}240$)급 해상도를 갖는다. 제작된 칩의 유효면적은 $5mm{\times}3mm$ 이며 3.3V 전원전압에서 약 35mW의 전력소모를 나타내었다. 변환속도는 10us 이었으며, 프레임율은 220 frames/s으로 측정되었다.

• Progress in Superconductivity
• /
• 제2권2호
• /
• pp.71-75
• /
• 2001

The effect of annealing step-edges of LaAlO$_3$ and MgO single crystal substrates on YBa$_2$Cu$_3$O$_{7}$ junction has been studied. The step-edge was fabricated by argon ion milling and was annealed at 105$0^{\circ}C$ in 1 attn oxygen pressure. We compared AFM image near step-edge of the substrates between before and after annealing process. And YBa$_2$Cu$_3$O$_{7}$ thin film was deposited on the step-edge by a standard pulsed laser deposition. The step-edge junctions were characterized by current-voltage curves at 77 K. The annealing of step-edges of MgO substrate improved the current-voltage characteristic of Josephson junction: double steps in the current-voltage characteristic disappeared. However the annealing for LaAlO$_3$ did not improve the junction property.rty.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.559-571
• /
• 2012

Dimethyl ether (DME) is a new clean fuel as an environmentally-benign energy resource. DME can be manufactured from various energy sources including natural gas, coal, and biomass. In addition to its environmentally friendly properties, DME has similar characteristics to those of LPG. The aim of this article is to represent the development of new DME process with KOGAS's own technologies. KOGAS has investigated and developed new innovative DME synthesis process from synthesis gas in gaseous phase fixed bed reactor. DME has been traditionally produced by the dehydration of methanol which is produced from syngas, a product of natural gas reforming. This traditional process is thus called the two-step method of preparing DME. However, DME can also be manufactured directly from syngas (single-step). The single-step method needs only one reactor for the synthesis of DME, instead of two for the two-step process. It can also alleviate the thermodynamic limitations associated with the synthesis of methanol, by converting the produced methanol into DME, thereby potentially enhancing the overall conversion of syngas into DME. KOGAS had launched the 10 ton/day DME demonstration plant project in 2004 at Incheon KOGAS LNG terminal. In the mid of 2008, KOGAS had finished the construction of this plant and has successively finished the demonstration plant operation. And since 2008, we have established the basic design of commercial plant which can produce 3,000 ton/day DME.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.193-193
• /
• 2011

To obtain ceramic films, the sol-gel coating technique has been broadly used with heat treatment, but crack formation tend to occur during heat treatment in thick sol-gel films. We prepared PZT thin films by sol-gel method with single-step spin coating process. The PZT solution have been synthesized using lead acetate ($Pb(CH_3COO)_2$), zirconium acetylacetonate ($Zr(OC_3H_7^n)_4$), and titanium diisopropoxide bis(acetylacetonate) 75wt% in isopropanol ($Ti(OC_3H_7^i)_2(OC_3H_7^n)_2$) as starting materials and n-propanol was selected as a solvent. The poly(vynilpyrrolidone) (PVP) was added with 0, 0.25, 0.5, 0.75, and 1 molar ratios to control viscosity of solution. We investigated influence of the viscosity on thickness, microstructure, and electrical properties of final PZT films. Thermo-gravimetric analysis and differential scanning calorimeter (TGA/DSC) was carried out from room temperature to $800^{\circ}C$ in order to measure pyrolysis temperature. Structural characteristics were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Ferroelectric and dielectric properties were measured by RT66A (Radiant) and impedance analyzer (Agilent), respectively. The thicknesses of PZT films depended on incorporation of an excess amount of PVP. Finally, we obtained PZT films of good quality without crack formation via single-step spin coating.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.666-669
• /
• 2002

Process design of hot forging, asymmetric to symmetric rail, which is used for the turnout of railway express has been investigated. Owing to the big difference in shape between the initial billet and the final forged product, it is impossible to hot forge the rail in a single step. Therefore, multi step forging as well as die design for each step are necessary for the production. The deformation behavior during hot forging has been analyzed by the numerical simulation through commercial FEA software, DEFORM$^{TM}$-2D. Modification of the design and repeated simulation have been carried out on the basis of the simulation result. For comparison with the simulation results, flow analysis experiment using plasticize has been also carried out. The results of the flow analysis experiment showed good agreement with those of the simulation. Therefore, the developed process design could be applied to the actual production.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1645-1648
• /
• 2006

We have developed a CMOS LTPS process, which requires only five photolithographic masks and only one ion doping step. Single TFTs, inverters, ring oscillators and shift registers were fabricated. N- and p-channel devices reached field effect mobilities of $173cm^2/Vs$ and $47cm^2/Vs$, respectively.