• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.507-511
• /
• 2011

This paper presents a single-switch buck converter with a ripple-free inductor current. In the proposed converter, the filter inductor current ripple is completely removed by utilizing an auxiliary circuit consisting of an additional winding of the filter inductor, an auxiliary inductor, and an auxiliary capacitor. Moreover, the ripple-free current characteristic is maintained under both light load and full load conditions. The theoretical analysis and performance of the proposed converter were verified with a 110W experimental prototype operating at a 107 kHz switching frequency.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.78-84
• /
• 2011

In this paper, the switching frequency and THD for the reduction instead of traditional single phase inverter using a new type of central arm of the single phase inverter is proposed. The proposed single phase inverter topology, the existing one to add a arm by two-way central switch 3-level output voltage can be raised and, central arm, especially one or two of the switches by using a switch to the diode current switching algorithm was simplified. During the dead time because of this, depending on the direction of the current level does not appear in any other existing level compared to the inverter output voltage level of the THD has the advantage that less can be. The simulation and experimental results verified the validity of the proposed topology.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.869-872
• /
• 2005

In this paper we present a switch wrapper for an AMBA AXI, which is an efficient on-chip-network interface compared to bus-based interfaces in a multiprocessor SoC. The AXI uses an idea of NoC to provide the increasing demands on communication bandwidth within a single chip. A switch wrapper for AXI is located between a interconnection network and two IPs connecting them together. It carries out a mode of routing to interconnection network and executes protocol conversions to provide compatibility in IP reuse. A switch wrapper consists of a direct router, AHB-AXI converters, interface modules and a controller modules. We propose the design of a all-in-one type switch wrapper.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.361-362
• /
• 2016

Presented in this paper is the design of a high voltage switch module made up of MOSFETs, pulse transformers and their gate driver circuits compactly fitted onto a single PCB module. The ease by which the switch modules can be configured (series stacking and/or parallel stacking) to meet future load variations allows for flexible operation of this design. In addition, the detailed implementation of the gate driver circuit for reliable and easier switch synchronization is also described in this paper. The stored energy in the capacitor bank of a 15kV, 4.5kJ/s peak power capacitor charger was discharged using the developed high voltage switch, and by experimental results, the operation of the proposed circuit was verified to be effectively used as a switch for pulse discharging.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권3호
• /
• pp.177-182
• /
• 2007

This paper presents the see-saw type RF MEMS switch based on a single crystalline silicon structure with narrow gap vertical comb. Low actuation voltage and high isolation are key features to be solved in electrostatic RF MEMS switch design. Since these parameters in conventional parallel plate RF MEMS switch designs are in trade-off relationship, both requirements cannot be met simultaneously. In the vertical comb design, however, the actuation voltage is independent of the vertical separation distance between the contact electrodes. Therefore, the large separation gap between contact electrodes is implemented to achieve high isolation. We have designed and fabricated RF MEMS switch which has 46dB isolation at 5GHz, 0.9dB insertion loss at 5GHz and 40V actuation voltage.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.113-116
• /
• 2003

Confluence buffers and single flux quantum (SFQ) switches are essential components in constructing a high speed superconductive Arithmetic Logic Unit (ALU). In this work, we developed a SFQ confluence buffer and an SFQ switch. It is very important to optimize the circuit parameters of a confluence buffer and an SFQ switch to implement them into an ALU. The confluence buffer that we are currently using has a small bias margin of $\pm$11％. By optimizing it with a Josephson circuit simulator, we improved the design of confluence buffer. Our simulation study showed that we improved bias global margin of 10％ more than the existent confluence buffer. In simulations, the minimal bias margin was $\pm$33％. We also designed, fabricated, and tested an SFQ switch operating in a DC mode. The mask layout used to fabricate the SFQ switch was obtained after circuit optimization. The test results of our SFQ switch showed that it operated correctly and had a reasonably wide margin of $\pm$15％.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.291-294
• /
• 2004

본 연구는 단일 입력 및 다중 출력 크로스바 방식의 스위치 구조에 관한 연구로써 특히 고효율의 방송 기능을 가지는 가변형 방송스위치 구조를 지원한다. 입력 및 출력 버퍼 스위치(input and output buffer switch)에서 중앙 중재기(central arbiter)가 다중 입력포트로부터의 전송 요청(request)을 모아서 모든 입력포트들이 공유하는 각 출력포트에서 최대한 많은 전송 허가(grant)를 빠른 시간 내에 결정하고 그 결과를 각 입력 버퍼들에게 고속으로 전달(transmission)하는 기능을 지원하는 스위치 구조에 관한 것으로 특별히 방송 패킷(broadcast packet)을 스위칭 함에 있어 높은 처리율 (high throughput)을 제공하면서 고속으로 대용량 스위칭(large scale switching) 기능을 제공한다.

• 한국통신학회논문지
• /
• 제30권4B호
• /
• pp.162-169
• /
• 2005

패킷 스위치로부터 발생되는 트래픽이 전통적인 트래픽 모델인 포와송 분포와 마코비안 프로세스로 가정된 네트워크로부터 발생되는 트래픽과 상당히 차이가 나는 self-similar 현상을 보이고 있다는 것이 알려지고 있고 또한 기존에 제안된 대부분의 호 수락 제어 방법에 대한 성능 분석은 스위치가 단독으로 존재한다고 가정하여 이루어지고 있다. 그러나 실제 트래픽이 목적지에 도달하기 위해서는 라우팅을 통하여 여러 스위치들을 거쳐야하므로 호 수락 제어 방법에 대한 성능 분석은 다단으로 연결된 스위치로 확장되는 것이 필요하다. 본 논문을 통하여 기존에 제안된 호 수락 제어 방법이 단일 스위치 환경 하에서는 적절하게 동작이 이루어지나 다단으로 스위치가 연결되어 있는 환경에서는 뒤에 위치하고 있는 스위치에 필요 이상의 유효 대역폭을 할당 한다는 것을 알 수 있다. 그러므로 본 논문에서는 공유 버퍼 메모리를 갖는 다단 네트워크 스위치 환경에서 셀 손실률과 이용률 그리고 각 스위치 출력포트의 self-similarity를 분석하여 self-similar 트래픽 환경에서 효과적으로 대역폭을 할당할 수 있는 호 수락 제어 방법을 제안한다.

• ETRI Journal
• /
• 제31권3호
• /
• pp.298-303
• /
• 2009

A single-switch parallel resonant converter for induction heating is implemented. The circuit consists of an input LC-filter, a bridge rectifier, and a controlled power switch. The switch operates in soft commutation mode and serves as a high frequency generator. The output power is controlled via the switching frequency. A steady state analysis of the converter operation is presented. A closed-loop circuit model is also presented, and the experimental results are compared with the simulation results.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.425-429
• /
• 2002

In this paper, a single-phase inverter using a diode bridge-type resonant circuit to implement ZVT(Zero Voltage Transition) switching is presented. The current control algorithm is analyzed about how to design the circuit with auxiliary switch which can ZVT operation for the main power switch. The simulation and experimental results would be shown to verify the proposed current algorithm, because the main power switch is turn on with ZVT and the hi-directional inverter is operated.