• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.282-289
• /
• 2017

Objectives: It was aimed to compare the cyclic fatigue resistances of ProGlider (PG), One G (OG), and HyFlex EDM (HEDM) nickel titanium glide path files in single- and double-curved artificial canals. Materials and Methods: 40 PG (16/0.02), 40 OG (14/0.03), and 40 HEDM (10/0.05) single-file glide path files were used in the present study. Sixty files were subjected to cyclic fatigue test by using double-curved canals and 60 files by using single-curved canal (n = 20). The number of cycles to fracture (NCF) was calculated and the length of the fractured fragment (FL) was determined by a digital micro-caliper. Twelve pieces of fractured files were examined with scanning electron microscope to determine fracture types of the files (n = 2). The NCF and the FL data were analyzed using one-way analysis of variance and post hoc Tukey test using SPSS 21 software (p < 0.05). Results: In all of the groups, NCF values were significantly lower in double-curved canals when compared to single-curved canals (p < 0.05). For both of single- and double-curved canals, NCF values of HEDM group in apical and coronal curvatures were found to be significantly higher than NCF values of PG and OG groups (p < 0.05). In both of single- and double-curved canals, NCF value of PG group was found significantly higher than OG group (p < 0.05). Conclusions: Within the limitations of this study, HEDM glide path files were found to have the highest cyclic fatigue resistance in both of single- and double-curved canals.

• Journal of Korea Multimedia Society
• /
• v.13 no.8
• /
• pp.1235-1244
• /
• 2010

Most emerging smart phones support capacitive touch sensors. It renders existing gesture-based interfaces not suitable since they were developed for the resistive touch sensors and pen-based input. Unlike the flick gestures from the existing gesture interfaces, the finger flick gesture used in this paper reduces the workload about half by selecting the target and the command to perform on the target at a single touch input. With the combination with multi-touch interface, it supports various menu commands without having to learn complex gestures, and is suitable for the touch-based devices hence it minimizes input error. This research designs and implements the multi-touch and flick interface to provide an effective file management system on the smart phones with capacitive touch input. The evaluation proves that the suggested interface is superior to the existing methods on the capacitive touch input devices.

• Journal of KIISE
• /
• v.45 no.1
• /
• pp.9-14
• /
• 2018

Tar is a Linux command that combines several files into a single file. Combining multiple small files into large files increases the compression efficiency and data transfer speed. However, tar has a problem in that smaller target files, result in a lower performance. In this paper, we show that this performance degradation occurs when tar reads the data from the target files and propose qtar (quick tar) to solve this problem via flash-level remapping. When the size of an I/O request is less than 1 MB, the I/O performance decreases proportionally to the decrease in size of the I/O request. Since tar reads the data of files one by one, a smaller file size results in a lower performance. Therefore, the remapping technique is implemented in qtar to read data from the target files at the maximum I/O size regardless of the size of each file. Our evaluations show that the execution time with qtar is reduced by up to 3.4 times compared to that with tar.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.6 s.261
• /
• pp.635-643
• /
• 2007

As many engineers and technicians are involved in the design process of large scale and/or complex products, there are a lot of miss matches and interferences due to designers' faults and several kinds of CAD systems. Recently, CAD systems are applied to verify and check the assembly process. Digital Mock-Up(DMU) system, a tool to build a virtual mock-up in the design stage, has been used to prevent the interferences and miss matches during precision design processes. Using the virtual assembly tool, engineers are able to design precision and interference free parts without physical mock-ups. Instead of a single CAD source, several CAD systems are used to design a complex product. Several organizations are involved in the distributed design environment for heterogeneous multi-CAD assembly. XML and the lightweight CAD file are proposed for the multi-CAD assembly. XML data contains hierarchy of the heterogenenous multi-CAD assembly. STEP PDM schema and STEP ISO 10303-28 formations are applied to construct the XML data. The lightweight CAD file produced from various CAD files through ACIS kernel and InterOp not only contains mesn, B-Rep and topological data, but also is used to visualize CAD data and to verify dimensions. Developed system is executed on the desktop computers. It does not require commercial CAD systems to visualize 3D assembly data. Real-time interference and fitness checks, dimensional verification, and design and assembly verification are performed on the developed system. Assembly of heterogeneous models for a car is conducted to verify the effectiveness of the developed DMU system on the Internet.

• Restorative Dentistry and Endodontics
• /
• v.44 no.3
• /
• pp.31.1-31.9
• /
• 2019

Objectives: To compare the formation of dentinal defects using stainless-steel hand K-files (HFs), rotary files, reciprocating files, and Self-Adjusting File (SAF), when used for oval root canals. Materials and Methods: One hundred and forty extracted human mandibular premolar with single root and oval canal were selected for this study. Oval canals were confirmed by exposing to mesio-distal and bucco-lingual radiographs. Teeth with open apices or anatomic irregularities were excluded. All selected teeth were de-coronated perpendicular to the long axis of the tooth, leaving roots segments approximately of 16 mm in length. Twenty teeth were left unprepared (control), and the remaining 120 teeth were divided into 6 groups (n = 20) and instrumented using HF (size 40/0.02), Revo-S (RS; size 40/0.06), ProTaper NEXT (PTN; size 40/0.06), WaveOne (WO; size 40/0.09), RECIPROC (RC; size 40/0.06), and the SAF (2 mm). Roots were then sectioned 3, 6, and 9 mm from the apex, and observed under stereomicroscope, for presence of dentinal defects. "No defect" was defined as root dentin that presented with no visible microcracks or fractures. "Defect" was defined by microcracks or fractures in the root dentin. Results: The control, HF, and SAF did not exhibit any dentinal defects. In roots instrumented by RS, PTN, WO, and RC files exhibited microcracks (incomplete or complete) in 40%, 30%, 55%, and 50%, respectively. Conclusions: The motor-driven root canal instrumentation with rotary and reciprocating files may create microcracks in radicular dentine, whereas the stainless-steel hand file instrumentation, and the SAF produce minimal or less cracks.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.4
• /
• pp.971-980
• /
• 2017

Data deduplication can be utilized to reduce storage space in cloud storage services by storing only a single copy of data rather than all duplicated copies. Users who are concerned the confidentiality of their outsourced data can use secure encryption algorithms, but it makes data deduplication ineffective. In order to reconcile data deduplication with encryption, Liu et al. proposed a new server-side cross-user deduplication scheme by exploiting password authenticated key exchange (PAKE) protocol in 2015. In this paper, we demonstrate that this scheme has side channel which causes insecurity against the confirmation-of-file (CoF), or duplicate identification attack.

• Advances in Energy Research
• /
• v.5 no.4
• /
• pp.321-339
• /
• 2017

Energy simulation tools can provide information on the amount of heat transfer through building envelope components, which are considered the main sources of heat loss in buildings. Therefore, it is important to improve the quality of outputs from energy simulation tools and also the process of obtaining them. In this paper, a new Building Energy Performance Assessment Tool (BEPAT) is introduced, which provides users with granular data related to heat transfer through every single wall, window, door, roof, and floor in a building and automatically saves all the related data in text files. This information can be used to identify the envelope components for thermal improvement through energy retrofit or during the design phase. The generated data can also be adopted in the design of energy smart homes, building design tools, and energy retrofit tools as a supplementary dataset. BEPAT is developed by modifying EnergyPlus source code as the energy simulation engine using C++, which only requires Input Data File (IDF) and weather file to perform the energy simulation and automatically provide detailed output. To validate the BEPAT results, a computer model is developed in Revit for use in BEPAT. Validating BEPAT's output with EnergyPlus "advanced output" shows a difference of less than 2% and thus establishing the capability of this tool to facilitate the provision of detailed output on the quantity of heat transfer through walls, fenestrations, roofs, and floors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.3
• /
• pp.291-300
• /
• 2001

In this paper, we developed a Satellite Image Processing System for obtaining 3-D positional information which is composed of five process modules. As a procedure of them, the Data Process module is the procedure that reads and processes the header file to generate data files. and then calculates orbital parameters and sensor attitudes for obtaining of 3-D positional information with them. The 3D Process module is to calculate 3-D positional information and the Dialog Process module is to correct the time of image frame center using the single image or stereo images for implementing the 3D Process module. We expect to obtain 3-D positional information with the header file and minimum GCPs(1∼2 points) using this system efficiently and economically in comparison with existing commercial software packages.

• Journal of Biomedical Engineering Research
• /
• v.14 no.4
• /
• pp.327-332
• /
• 1993

Automatic transmission of data from the blood analyzer to the request site is one of the most important part in hospital computerization. We have developed a system that transmits data from the arterial blood gas analyzer to the request site automatically In this system HOST computer, FILE server,'LAN(Local Area Network) , 3270 Emulator and bfulti-port card are integrated with 3 blood gas analyzers(NOVA Inc., USA) which are connected to a single multi-port card in a personal computer. When specimen are collected from tramp)inly sites, they are transferee to the laboratory In the Yonsei Cardiovascular Center After analysis, the result is transmitted to the personal computer via serial commnunication between machine and multi-port card using interrupt method. Then, the patient's information (Name, Patient ID No., etc.) is obtained from the HOST computer througth the emulator. The combined data (patient information & lab data) is transmitted to each request site via LAN automatically These results are stored in the File Server for one year and they can be reviewed anytime. Also, it could be used for the various statistics and the flow chart for clinical research. Additionally, we found thal this system reduces the personal labor.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.142-145
• /
• 2017

Currently, a trend in image processing is high-quality and high-resolution. The size and amount of image data are increasing exponentially because of the development of information and communication technology. Thus, license plate recognition with a single processor cannot handle the increasing data. This paper proposes a number plate recognition system using a distributed processing framework, Hadoop. Using SequenceFile format in Hadoop, each mapper performs a license plate recognition with a number of image data in a data block Experimental results show that license plate recognition performance with 16 data nodes accomplishes speedup of maximum 14.7 times comparing with one data node. In large dataset, the recognition performance is robust even if the number of data nodes increases gradually.