• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.79-84
• /
• 2014

Increasing demand for realistic media and improvement of transmission and device techniques accelerate ultra-high definition(UHD) service realization. In Korea, the cable TV broadcasting companies are planning to commercialize in Apr. 2014. For the terrestrial TV broadcasting service, technical issues are considered for the specification of UHD broadcasting system. However, the frequency bands and the system bandwidth for the terrestrial UHD broadcasting system have not been decided. In this paper, we propose required spectrum bandwidth for the next-generation terrestrial broadcasting service considering source coding, error correcting codes and modulation techniques. Also, we propose frequency management plan for terrestrial UHD broadcasting system in which we divide all parts of the country into 9 frequency zones and allocate 4 frequency band to each frequency zone considering single frequency network (SFN).

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.5
• /
• pp.737-748
• /
• 1995

In this paper, we studyed the variables in the design of multichip memory modules with 4M$\times$1bit DRAM chips to construct high capacity and high speed memory modules. The configuration of the module was 8 bit, 16 bit, and 32 bit DRAM modules with employing 0.6 W, 70 nsec 4M$\times$1 bit DRAM chips. We optimized routing area and wiring density by performing the routing experiment with the variables of the chip allocation, module I/O terminal, the number of wiring, and the number of mounting side of the chips. The multichip module was designed to be able to accept MCM-L techiques and low cost PCB materials. The module routing experiment showed that it was an efficient way to align chip I/O terminals and module I/O terminals in parallel when mounting bare chips, and in perpendicular when mounting packaged chips, to set module I/O terminals in two sides, to use double sided substrates, and to allocate chips in a row. The efficient number of wiring layer was 4 layers when designing single sided bare chip mounting modules and 6 layers when constructing double sided bare chip mounting modules whereas the number of wiring layer was 3 layers when using single sided packaged chip mounting substrates and 5 layers when constructing double sided packaged chip mounting substrates. The most efficient configuration was to mount bare chips on doubled substrates and also to increase the number of mounting chips. The fabrication of memory multichip module showed that the modules with bare chips can be reduced to a half in volume and one third in weight comparing to the module with packaged chips. The signal propagation delay time on module substrate was reduced to 0.5-1 nsec.

• The korean journal of orthodontics
• /
• v.48 no.3
• /
• pp.153-162
• /
• 2018

Objective: The aim of this trial was to compare the alignment efficiency and intermaxillary arch dimension changes of nickel-titanium (NiTi) or copper-nickel-titanium (CuNiTi) round archwires with increasing diameters applied sequentially to the mandibular arch. Methods: The initial alignment phase of fixed orthodontic treatment with NiTi or CuNiTi round archwires was studied in a randomly allocated sample of 66 patients. The NiTi group comprised 26 women, 10 men, and the CuNiTi ($27^{\circ}C$) group comprised 20 women, 10 men. The eligibility criteria were as follows: anterior mandibular crowding of minimum 6 mm according to Little's Irregularity Index (LII), treatment requiring no extraction of premolars, 12 to 18 years of age, permanent dentition, skeletal and dental Class I malocclusion. The main outcome measure was the alignment of the mandibular anterior dentition; the secondary outcome measure was the change in mandibular dental arch dimensions during 12 weeks. Simple randomization (allocation ratio 1:1) was used in this single-blind study. LII and mandibular arch dimensions were measured on three-dimensional digital dental models at 2-week intervals. Results: No statistically significant difference was observed between NiTi and CuNiTi according to LII (p > 0.05). Intercanine and intermolar arch perimeters increased in the CuNiTi group (p < 0.001). Inter-first premolar width showed a statistically significant interaction in week ${\times}$ diameter ${\times}$ application (p < 0.05). Conclusions: The effects of NiTi and CuNiTi round archwires were similar in terms of their alignment efficiency. However, the intercanine and intermolar arch perimeters, and the inter-first premolar width changes differed between groups.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.423-433
• /
• 2005

We present power(in frequency domain) and rate adaptation(in time domain) schemes in multicarrier (MC) direct-sequence code-division multiple-access(DS/CDMA) communications. Utilizing channel state information from the receiver, the adaptation schemes allocate power the user's sub-band with the largest channel gain. In the time domain, the transmission data rate is adapted for a desired transmission quality. In the case of single-user channels, a closed-form expression is derived for an optimal time domain power adaptation that minimizes the average bit error rate(BER). Channel inversion power adaptation is found to provide nearly optimal performance in this case, as the number of sub-bands or available average transmission power increase. Analysis and simulation results show the BER performance of the proposed power and rate adaptations with fixed average transmission power significantly improves the performance over the power allocation in the frequency domain only. Also, we compare the performance of the proposed power and rate adaptation schemes in MC-DS/CDMA systems with that of power and rate adapted single carrier DS/CDMA systems with RAKE receiver.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.48-56
• /
• 2007

OFDMA (Orthogonal Frequency Division Multiple Access) is widely used as multiple access techniques for next generation mobile communication systems. However, OFDMA has a disadvantage of high peak-to-average power ratio and SC-FDMA (Single-Carrier Frequency Division Multiple Access) was proposed for uplink systems to overcome the drawback. SC-FDMA also has several demerits including degraded performance with high-order modulations or with multiple antenna techniques, and less flexibility in resource allocation and pilot patterns. In order to achieve the best performance over a wide range of environments, each mobile station should select either of OFDMA and SC-FDMA according to the given condition and a pilot structure for SC-FDMA systems should be similar to that of OFDMA to maintain the same frame structure. While conventional SC-FDMA schemes require an entire SC-FDMA symbol or a separate short symbol for pilots, this paper proposes a method which supports the pilots included in SC-FDMA data parts and enables a SC-FDMA frame to hold the same structure as an OFDMA frame.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1755-1764
• /
• 1997

In this paper, we proposed the mechanism for the buffer allocation and a cell scheduling method with logical separation a single buffer in the ATm switch, and analyzed the cell loss probability and the delay of each trafic (CBR/VBR/ABR) based on the weighted value and the dynamic cell service scheduling algorithm. The proposed switch buffering system classifies composite trafics incoming to the switch, according to the characteristic of traffic, then stores them in the logically separated buffers, and adopts the round-robin service with weighted value in order to transmit cells in buffers though one output port. We analyzed 4 cell service scheduling algorithms with dynamic round-robinfor each logically separated service line of a single buffer, in which buffers have the respective weighted values and 3 classes on mixed traffic which characteristized by traffic descriptor. In simulation, using SIMCRIPT II.5., we model the VBR and the ABR traffics as ON/OFF processes, and the CBR traffic as a Poisson processes. As the results of analysis according to the proposed buffer management mechanism and cell service algorithm, we have found that the required QoS of each VC can be quaranteed depends on a scale of weighted values allocated to buffers that changed the weighted values, and cell scheduling algorithm.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.5
• /
• pp.385-393
• /
• 2021

This study proposes a multi-core-based controller design for an ESC(Electronic Stability Control) system in an automotive multi-core processor. Considering the architectures of an automotive multi-core processor and an ESC system, the overall execution time has been optimized for multi-core platforms. The function module assignment, synchronization between cores, and memory assignment for core-dependent variables in automotive multi-core systems are evaluated. The ESC controller comprising five function modules is used herein. Based on the proposed design, the single-core controller is extended to multi-core controllers. Using multi-core optimization methods, such as function module assignment, semaphore, interrupt awakening, and variable assignment over cores, the ESC system is redesigned to a multi-core controller. Experimental results reveal that the execution time for the multi-core processor is reduced by 59.7% compared with that for the single-core processor.

• Journal of Korean Library and Information Science Society
• /
• v.50 no.2
• /
• pp.191-214
• /
• 2019

In order to understand the trends of collaborative research in the field of Library and Information Science (LIS) in Korea, this study analyzed bibliometric data and keywords of 5,383 Journal papers by 195 Korean LIS professors from 2000 to 2017 as well as the author credit allocation formulas of 26 Korean university research evaluation criteria. Examination of university research evaluation criteria revealed co-authors' credit level to be generally much lower than that of single authors, which in turn reduces the relative value of collaborative research. As a result, recent journals publish more co-authored papers than single author papers both domestically and internationally. The study also found collaborative research to be less prevalent in private universities than national universities and least prevalent in associate professors among professors. Furthermore, keyword analysis of study data revealed the emerging topics of both domestic and international collaborative research to be those that reflect social phenomena as well as those that relate to information science employing new technologies.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.65-69
• /
• 2019

This paper presents an optimized adoption of NVM for the storage system considering application characteristics. To do so, we first characterize the storage access patterns for different application types, and make two prominent observations that can be exploited in allocating NVM storage efficiently. The first observation is that a bulk of I/O does not happen on a single storage partition, but it is varied significantly for different application categories. Our second observation is that there exists a large proportion of single accessing in storage data. Based on these observations, we show that maximizing the storage performance with NVM is not obtained by fixing it as a specific storage partition but by allocating it adaptively for different applications. Specifically, for graph, database, and web applications, using NVM as a swap, a journal, and a file system partitions, respectively, performs well.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1003-1010
• /
• 2020

This paper investigates the achievable data rate for the single-user decoding(SUD) receiver, which does not perform successive interference cancellation(SIC), in contrast to the conventional SIC non-orthogonal multiple access(NOMA) scheme. First, the closed-form expression for the achievable data rate of SUD NOMA with correlated information sources(CIS) is derived, for the stronger channel user. Then it is shown that for the stronger channel user, the achievable data rate of SUD NOMA with independent information sources(IIS) is generally inferior to that of conventional SIC NOMA with IIS. However, for especially highly CIS, we show that the achievable data rate of SUD NOMA is greatly superior to that of conventional SIC NOMA. In addition, to verify the impact of CIS on the achievable data rate of SUD, the extensive comparisons of the achievable data rates for the SUD receiver and the SIC receiver are compared for various correlation coefficients.