• 한국공간구조학회논문집
• /
• 제12권4호
• /
• pp.109-118
• /
• 2012

The large-space single-layer lattice dome is relatively simpler in terms of the arrangement of the various framework members and of the design of the junction than the multi-layered lattice dome, can reduce the numbers and quantity of the framework members, and has the merit of exposing the beauty of the framework as it stands. The single-layer lattice dome, however, requires a stability investigation of the whole structure itself, along with an analysis of the stress of the framework members, because an unstable phenomenon called "buckling" occurs when its weight reaches critical levels. Many researchers have systematically conducted researches on the stability evaluation of the single-layer lattice dome. No construction case of a single-layer lattice dome with a 300-m-long span, however, has yet been reported anywhere in the world. The large-space dome structure is difficult to erect due to the gigantic span and higher ceiling compared with other common buildings, and its construction cost is generally huge. The method of erecting a structure causes major differences in the construction cost and period. Therefore, many researchers have been conducting various researches on the method of erecting such structure. The step-up method developed by these authors can reduce the construction cost and period to a great extent compared with the other general methods, but the application of this method inevitably requires the development of system supports in the center section as well as pre-existing supports in the boundary sections. In this research, the safety during the construction of a single-layer lattice dome with 300-m-long span using pre-existing materials was examined in the aspect of structural strength, and the basic data required for manufacturing the supports in the application of the step-up method developed by these authors during the erection of the roof structure were obtained.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.133-133
• /
• 1999

We have fabricated and tested a simple circuit of the rapid single-flux-quantum(RSFQ) four-stage shift register using a single layer high-T$_c$ superconducting (HTS) YBa$_2Cu_3O_{7-x}$ (YBCO) thin film structure with 9 step-edge Josephson junctions. The circuit includes two read superconducting quantum interference devices(SQUID) and four stages. To establish a robust HTS RSFQ device fabrication process, we have focussed the reproducible process of sharp and straight step-edge formation as well as the ratio of film thickness to step height t/h. The spread of step-edge junction parameters was measured from each13 junctions with t/h=l/3, l/2, and 2/3 at various temperatures. We have demonstrated the simplified operation of the shift register at 65 K..

• 한국지반공학회논문집
• /
• 제28권7호
• /
• pp.55-65
• /
• 2012

지오그리드의 장기허용강도를 산출할 때 사용되는 총 감소계수는 내시공성 감소계수($RF_{ID}$), 내화학성 감소계수($RF_D$), 크리프 감소계수($RF_{CR}$) 등이 적용된다. 지오그리드의 단기인장강도에 대한 감소계수를 고려한 허용인장강도 산출 모델의 경우 감소계수들 사이의 상호 작용력을 고려하지 않는 한계를 가지고 있다. 접점강도는 인장강도와 마찬가지로 시공 시 손상이나 화학적 분해에 의하여 감소하게 된다. 기존의 단일접점강도 시험 방법은 치수효과를 고려할 수 없기에 결과의 편차가 큰 시공 시 손상된 시험편의 접점강도를 측정하는데 적합하지 않다. 또한 시공 시 손상에 의한 전단강도 변화에 대한 연구도 전혀 이루어지지 않은 실정이다. 따라서 본 연구에서는 다양한 조건을 고려하여 지오그리드의 장기성능에 영향을 미치는 감소계수들을 재평가하고 감소계수 사이의 상호 작용을 고려하여 정확한 장기허용강도를 구하려고 한다. 내시공성 시험과 내화학성 시험 후 크리프 시험결과 총 감소계수는 GRI GG-4 시험값보다 작게 나타났다. 내시공성 시험과 내화학성 시험 후 접점강도의 감소계수는 인장강도 감소계수보다 더 작게 나타났다. 내시공성 시험후 전단강도 차이가 나타나지 않거나 증가함을 나타내었다.

• 생명과학회지
• /
• 제18권6호
• /
• pp.764-769
• /
• 2008

커넥신(connexin) 32 유전자의 돌연변이가 씨엠티엑스(CMTX, X-linked Charcot-Marie-Tooth) 질환과 관련이 있다. 현재까지 300여개 이상의 돌연변이가 보고가 되었으나 이 질환에 대한 상세한 분자병리학적 원인을 거의 알려져 있지 않고 있다. 여러 연구를 통해서 커넥신 세포막채널이 간극결합채널이 갖고 있는 대부분의 생물리학적 특성을 갖고 있는 것으로 판명되었다. 이번 연구에서는 씨엠티엑스 질환과 관련된 두 개의 돌연변이체를 선정하여 간극결합채녈 대신 돌연변이체로 구성된 커넥신 세포막채널을 이용하여 단일채널수준에서 이들 돌연변이체의 특성을 조사하였다. M34T 돌연변이 세포막채널의 생물리학적 특성은 이들로 구성된 돌연변이 간극결합채널의 특성과 거의 유사하였다. 더욱이, 돌연변이 세포막채널을 이용한 연구를 통해서 간극결합채널을 이용한 연구에서는 밝혀지지 않았던 개폐극성의 역전, 빠른 개폐의 소실과 느린 개폐의 생성과 같은 새로운 사실을 알게 되었다. T86C 돌연변이 세포막채널 또한 이의 모체가 되는 커넥신 32 세포막채널과 유사한 특성을 갖고 있음을 알게 되었다. 이상의 결과를 통해서 커넥신 세포막을 이용한 연구가 씨엠티엑스 질환의 돌연변이체를 연구하는데 매우 유용할 것으로 생각된다.

• 공업화학
• /
• 제9권5호
• /
• pp.710-714
• /
• 1998

Poly(p-phenylene vinylene), PPV를 발광층으로 하고 전자수송층(electron transport layer, ETL)이 도입된 이중 접합구조 유기 전기발광소자(electroluminescence device, ELD)를 제작하고 전기 발광 특성을 조사하였다. 전자 수송제로는 2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole(PBD)를 사용하고 이를 분산시킬 기재 고분자(matrix polymer)로는 stilbene계 공단량체를 포함하는 poly(styrene-co-p-vinyl-trans-stilbene (PVTS)), poly(styrene-co-MeO-PVTS) 및 poly(styrene-co-MeO-ST)를 합성하였다. 이들 재료를 이용하여 이종 접합구조 ELD를 제조하였으며 poly(styrene-co-PVTS)를 기재 고분자로 쓴 EL 소자가 최대의 휘도를 나타냄을 확인하였다. Poly(styrene-co-MeO-PVTS) 및 poly(styrene-co-MeO-ST) 등 전자 주게 성질을 가진 methoxy기를 함유하는 기재 고분자를 쓴 EL 소자는 전자 수송층이 없는 ITO/PPV/Mg 단층 소자와 휘도가 유사 혹은 낮게 나타났다. Poly(styrene-co-PVTS)를 ETL에 쓴 EL 소자에 있어서 styrene보다 긴 conjugation 길이의 증가가 EL 발광 스펙트럼에 미치는 영향은 크지 않고 실제 발광은 PPV에 의해 주로 일어남이 관찰되었다.

• Journal of Korean Neurosurgical Society
• /
• 제62권1호
• /
• pp.96-105
• /
• 2019

Objective : The aims in the management of thoracolumbar spinal fractures are not only to restore vertebral column stability, but also to obtain acceptable alignment of the thoracolumbar junction (T-L junction) to prevent complications. However, insufficient surgical correction of the thoracolumbar spine would be likely to cause late progression of abnormal kyphosis. Therefore, we identified the surgical factors that affected unfavorable radiologic outcomes of the thoracolumbar spine after surgery. Methods : This study was conducted in a single institution from January 2007 to December 2013. A total of 98 patients with unstable thoracolumbar spine fracture were included. In these patients, fixation was done through transpedicular screws with rods by three surgical patterns. We reviewed digital radiographs and analyzed the images preoperatively and postoperatively during follow-up visits to compare the change of the thoracolumbar Cobb angle with radiologic parameters and clinical outcomes. The unfavorable radiologic group was defined as the patients who were measured as having greater than 20 degrees of thoracolumbar Cobb angle on the last follow-up, or who underwent kyphotic progression of thoracolumbar Cobb angle greater than 10 degrees from the immediate postoperative state to final follow-up, or who had overt instrument failure with/without additional surgery. We assessed the risk factors that affected the unfavorable radiologic outcomes. Results : We had 43 patients with unfavorable radiologic outcomes, including 35 abnormal thoracolumbar alignments and 14 instrumental failures with/without additional surgery. The multivariate logistic regression test showed that immediate postoperative T-L junction Cobb angle less than 10.5 degrees was a statistically significant risk factor, as well as the presence of osteoporosis (p=0.017 and 0.049, respectively). Conclusion : Insufficient correction of thoracolumbar kyphosis was considered to be a major factor of an unfavorable radiological outcome. The spinal surgeon should consider that having a T-L junction Cobb angle larger than 10.5 degrees immediately after surgery could result in an unfavorable radiological outcome, which is related to a poor clinical outcome.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1217-1226
• /
• 2015

In a grid-connected photovoltaic (PV) system, the traditional Z-source inverter uses a low frequency transformer to ensure galvanic isolation between the grid and the PV system. In order to combine the advantages of both Z-source inverters and transformerless PV inverters, this paper presents a modified single-phase transformerless Z-source PV grid-connected inverter and a corresponding PWM strategy to eliminate the ground leakage current. By utilizing two reversed-biased diodes, the path for the leakage current is blocked during the shoot-through state. Meanwhile, by turning off an additional switch, the PV array is decoupled from the grid during the freewheeling state. In this paper, the operation principle, PWM strategy and common-mode (CM) characteristic of the modified transformerless Z-source inverter are illustrated. Furthermore, the influence of the junction capacitances of the power switches is analyzed in detail. The total losses of the main electrical components are evaluated and compared. Finally, a theoretical analysis is presented and corroborated by experimental results from a 1-kW laboratory prototype.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.45-49
• /
• 2003

We have designed and fabricated the single-layer high $T_{c}$ SQUID magnetometer consisting of a directly coupled grain boundary junction SQUID with an inductance of 100 pH and 16 nested parallel pickup coils with the outermost dimension of 8.8 mm ${\times}$ 8.8 mm. The magnetometer was formed from a YBCO thin film deposited on an STO(100) bicrystal substrate with a misorientation angle of $30^{\circ}$. The SQUID magnetometer was further improved by optimizing the multi-loop pickup coil design for use in unshielded environments. Typical characteristics of the dc SQUID magnetometer had a modulation voltage of 40 $\mu\textrm{V}$ and a white noise of $30fT/Hz^{1}$2/. The SQUID magnetometer exhibited a 1/f noise level at 10 Hz reduced by a factor of about 3 compared with that of the conventional solid type pickup coil magnetometers and a very stable flux locked loop operation in magnetically disturbed environments.s.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.117-118
• /
• 2008

High-pressure deuterium annealing process is proposed and investigated for enhanced electrical and reliability properties of 512Mb DDR2 DRAM without increase in process complexity. High pressure deuterium annealing (HPDA) introduced during post metal anneal (PMA) improves not only DRAM performance but also reliability characteristics of MOSFET. Compared with a control sample annealed in a conventional forming gas, additional annealing in a high pressure deuterium ambient at $400^{\circ}C$ for 30 min decreased G1DL current and junction leakage. The improvements can be explained by deuterium incorporation at $SiO_2$/Si substrate interface near isolation trench edge.

• 대한토목학회논문집
• /
• 제6권1호
• /
• pp.13-24
• /
• 1986

본(本) 논문(論文)에서는 북한강(北漢江) 수계(水系)의 소양강(昭陽江)댐 및 화천(華川)댐의 실시간(實時間) 홍수조절(洪水調節) 모형(模型)을 개발(開發)하였다. 그 방법으로는 feedforward-feedback control에 의한 Simulation기법은 사용하였다. 즉, 예측 유입량을 이용한 단일댐 운영방안에 의하여 구간 각 댐의 방류량으로부터 두 댐의 합류점(合流點)에서의 유량을 구한 후 Feedback control에 의하여 합류점(合流點)의 첨두 유량을 경감하도록 상류댐 방류량을 재조정하도록 하였다. 또한 개발(開發)된 모형(模型)에 관한 민감도(敏感度) 분석(分析)을 행하였다.