• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.855-863
• /
• 2009

In this study, a beam-column junction type damper is proposed which saves the inner and outer space for the installation of damping devices and allows easy adjustment of control performance The result of the numerical analysis indicated that the displacement response and base shear of a single degree of freedom system by seismic load, El Centro 1940 was reduced with yield moment of the joint hinge and the specific yield moment ratio $\delta$ of the joint hinge existed for the optimal seismic performance. In addition, the dynamic nonlinear characteristics, effects of yielding and dependence of natural period of bi-linear system with the junction type damper is identified. The analysis of multi-degree of freedom system showed that responses of the controlled structures was reduced significantly as the number of a story increases and yield moment ratio decreases when the system is excited by seismic load and sine wave. On top of that, it was also observed that energy dissipation at the joint connected with the dampers was remarkable during excitation.

• 한국군사과학기술학회지
• /
• 제12권4호
• /
• pp.540-547
• /
• 2009

In the near future, military robots are likely to be substituted for military personnel in the field of battle. The power system of a legged robot is considerably more complex than the one used for a land vehicle because of the coordination and stability issues due to the large number of degree of freedom. In this paper, a servovalve-piston combination system for a straight-line motion of robot leg is modeled as three degree of freedom based on double inputs and single output transfer function. The output is the displacement of piston from neutral. The inputs are valve displacement from neutral and arbitrary load force in this system. LQR(Linear Quadratic Regulator) technique is applied in order to achieve robust stability and fast responses of the system. The Kalman filter loop, rejection of disturbance and noise, riccati equation, filter gain matrix, and frequency domain equality are analyzed and designed.

• Smart Structures and Systems
• /
• 제1권3호
• /
• pp.235-256
• /
• 2005

The non-linear behaviour of electrorheological (ER) and magnetorheological (MR) dampers makes it difficult to design effective control strategies, and as a consequence a wide range of control systems have been proposed in the literature. These previous studies have not always compared the performance to equivalent passive systems, alternative control designs, or idealised active systems. As a result it is often impossible to compare the performance of different smart damper control strategies. This article provides some insight into the relative performance of two MR damper control strategies: on/off control and feedback linearisation. The performance of both strategies is benchmarked against ideal passive, semi-active and fully active damping. The study relies upon a previously developed model of an MR damper, which in this work is validated experimentally under closed-loop conditions with a broadband mechanical excitation. Two vibration isolation case studies are investigated: a single-degree-of-freedom mass-isolator, and a two-degree-of-freedom system that represents a vehicle suspension system. In both cases, a variety of broadband mechanical excitations are used and the results analysed in the frequency domain. It is shown that although on/off control is more straightforward to implement, its performance is worse than the feedback linearisation strategy, and can be extremely sensitive to the excitation conditions.

• 한국지반공학회지:지반
• /
• 제6권1호
• /
• pp.7-14
• /
• 1990

주동단에 반력스프링이 부착된 공진주(spring-top resonant column) 시험기 주동단 불완전 고정의 영향을 연구하기 위해 2자유도 모델을 제안하였다. SYMPHONY스프레드쉿트를 이용하여 무차원주파수, F를 구할 수 있도록 전산화하였으며 이로부터 탄성계수를 구할 수 있다. F에 대한 반력 질량의 영향은 반력질량 및 시료의 질량 및 주파수에 관계되는 계수, T<20인 경우에 는 무시할 수 없음을 밝혔다. 시험기 및 시료의 질량과 주파수에 관계되는 계수, Tci가 증가함에 따라 F의 영향 역시 증가하였으나 T도 20인 경우 그 영향은 적었다. 주동단 고정을 위해서는 T, 이 20이상 되어야 함을 제안하였으며 이 경우 SDOF으로 취급할 수 있다. 시료와 시험기의 감쇠비는 F에 크게 영향을 미치지 않음도 밝혔다.

• 한국도로학회논문집
• /
• 제13권3호
• /
• pp.15-20
• /
• 2011

본 연구는 과속방지턱의 설치규격 특성을 검토하기 위하여 동역학적 이론을 기반으로 분석을 수행하였다. 먼저 과속방지턱에 대한 현장조사를 통해 기하구조 자료를 수집하여 현행 설치기준과 비교 분석하였으며, 차량과 운전자를 일체화시킨 단자유도 모델링 방법을 이용하여 충격하중에 의한 변위응답 스펙트럼을 구하였다. 해석 결과 과속방지턱의 폭과 높이는 커질수록 운전자에게 미치는 심리적 부담감이 커지나 과도한 불편함을 초래하지 않도록 크기를 결정해야 하는 것으로 분석되었다. 또한 과속방지턱의 폭과 높이의 비율은 운전자가 느끼는 수직가속도의 크기를 지배하므로 폭과 높이의 조화도 고려하여 과속방지턱을 설치하여야 한다.

• 한국해양공학회지
• /
• 제22권4호
• /
• pp.97-105
• /
• 2008

This paper represents the experimental identification of a finite-dimensional dynamical plant model for the HEMIRE Remotely Operated Vehicle. The experiments were conducted during sea trials in the East Sea in October 2006 and peer testing by the South Sea Research Institute in January 2007. A least-squares method was employed to identify decoupled single degree-of-freedom plant dynamical models for the X, Y, Z and heading degree-of-freedom from experimental data. The performance of the identified plant dynamical model was evaluated by directly comparing simulations of the identified plant model to the experimentally observed motion data from the actual vehicle.

• 소음진동
• /
• 제8권6호
• /
• pp.1144-1149
• /
• 1998

A two degree-of-freedom model of suspended cables is studied for forced resonant response. The method of averaging is used to obtain first-order approximations to the response of the system. A bifurcation analysis of the averaged system is performed in the case of 2-to-1 internal resonance. Nonlinear coupled-mode motions are found to bifurcate from single-mode responses and further bifurcate to limit cycle motions via Hopf bifurcations. The limit cycle solutions undergo period doubling bifurcations to chaos.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.28-32
• /
• 1989

In this paper, a DTG(Dynamically Tuned Gyroscope) and a DTG-based accelerometer designed and fabricated in the Seoul National University are described. For the purpose of the design, the functions and properties of DTG and accelerometer are investigated. The performance of the DTG is tested with the help of a single - degree - of - freedom rate table and a computer. The test result shows that the standard deviation of the DTG's random drift is 9.2 deg/(20min). The error model of the accelerometer is shown also.

• 대한의용생체공학회:의공학회지
• /
• 제11권1호
• /
• pp.179-186
• /
• 1990

A numerical analysis of crutch walking cycle has been performed to determine the transmissibility of a single-degree-of-freedom crutch system when a non-harmonic periodic forcing function is acting on the spring-damping-mass system. The results indicate that the damping factor which can reduce the forces transmitted to the human body plays an important role. In crutch walking, the stride angle of dynamic crutches must be limited for the comfortable walking.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.33-48
• /
• 2000

Limitations of the simple single degree of freedom vibration isolation theory in real applications are discussed and a theory of multi-dimensional vibration/noise isolation by power approach is introduced. Illustrations of the application to compressor of an air-conditioner are presented together with problems caused by approximations. Then possible sources of distortions in the vibration power estimation are looked into and some relevant research topics are suggested.