• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권5호
• /
• pp.496-510
• /
• 2016

Simulation technology is a type of shipbuilding product lifecycle management solution used to support production planning or decision-making. Normally, most shipbuilding processes are consisted of job shop production, and the modeling and simulation require professional skills and experience on shipbuilding. For these reasons, many shipbuilding companies have difficulties adapting simulation systems, regardless of the necessity for the technology. In this paper, the data model for shipyard production simulation model generation was defined by analyzing the iterative simulation modeling procedure. The shipyard production simulation data model defined in this study contains the information necessary for the conventional simulation modeling procedure and can serve as a basis for simulation model generation. The efficacy of the developed system was validated by applying it to the simulation model generation of the panel block production line. By implementing the initial simulation model generation process, which was performed in the past with a simulation modeler, the proposed system substantially reduced the modeling time. In addition, by reducing the difficulties posed by different modeler-dependent generation methods, the proposed system makes the standardization of the simulation model quality possible.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.317-325
• /
• 2011

Vehicle model validation for the static vehicle testing has been done by comparison of the simulation results and test results and the parameters of the vehicle model to be used in the simulation have been adjusted to reflect the measured behaviour. The vehicle model fort the simulation should be validated by suitable tests and/or practical experience. The static vehicle test used to validate the vehicle model are the weight measurement, the wheel offloading test, the bogie rotational resistance test and the sway test. Finally, the computer simulation model has been validated and using the validated vehicle model the acceptance of the vehicle safety of the resistance to flange climbing derailment at low speed can be examined.

• 융합정보논문지
• /
• 제12권2호
• /
• pp.81-93
• /
• 2022

본 연구의 목적은 코로나 팬데믹 시기에 웹기반 시뮬레이션 실습을 포함한 임상 실습 경험의 의미를 파악하는 것이다. 웹기반 시뮬레이션 실습과 임상 실습 경험을 포커스그룹 인터뷰를 통하여 자료를 수집하고 내용분석 방법에 따라 분석하였다. 포커스 그룹에 의한 심충 면담내용을 분석한 결과, 2개의 구성요소와 7개의 주제 묶음, 18개의 주제로 나타났다. 첫 번째 구성요소로, 임상 실습은 4개의 주제 묶음으로 '팬데믹 상황에서의 불안한 실습의 출발', '다양한 사례에 의한 직접 경험', 미래 간호사로서 준비하는 훈련 기회', ' 수행의 부담감 및 제한적 경험'이었다. 두 번째 구성요소인 웹기반 시뮬레이션 실습은 3개의 주제 묶음으로 '미완성의 간호실습', '가상공간에서의 임상 간호에 대한 간접경험', '통합 실습 모델의 요구'로 분류되었다. 간호교육과정에서 임상 실습은 매우 중요한 부분이나 학생들이 실제로 현장에서 수행할 수 있는 간호는 매우 제한적이다. 따라서 관찰 위주의 임상 실습의 단점을 보완하고, 실습 교육의 질적 수준을 높이기 위하여, 웹기반 시뮬레이션 실습을 포함한 혼합 실습 모델 등을 고려할 필요가 있다.

• 한국응용과학기술학회지
• /
• 제39권2호
• /
• pp.182-192
• /
• 2022

본 연구는 가상 시뮬레이션기반 노인간호 실습교육 실시 후 간호대학생의 몰입경험과 학습역량이 학습만족도에 미치는 영향을 파악하기 위한 조사연구이다. 연구 대상자는 간호대학 학생 72명을 대상으로 하였고, 자료수집은 2021년 4월 2일부터 5월 7일까지 온라인 설문을 통해 수행하였다. 자료분석은 SPSS/WIN 24.0을 이용하여 기술통계, 상관관계 및 다중회귀분석을 사용하였다. 연구결과, 가상 시뮬레이션 교육 후 간호대학생의 학습만족도는 몰입경험(r=.656, p<.001), 학습역량(r=.672, p<.001)과 유의한 정적 상관관계를 보였다. 학습만족도에 가장 영향력이 있는 요인은 학습역량(𝛽=.459, p<.001), 몰입경험(𝛽=.413, p<.001)으로 나타났으며 모형의 설명력은 60.9%이었다. 그러므로 가상 시뮬레이션 교육 후 학습만족도를 향상시키기 위해서 실습에 대한 몰입을 촉진하고 개개인의 학습역량을 향상시킬 수 있는 방안들을 개발할 것을 제언한다.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.226-230
• /
• 2013

In the tall building construction, the slab formwork largely impacts on construction cost. Because productivity of a slab formwork is influenced by a number of and the efficiency of equipment, using the equipment-based construction method, an appropriate equipment input planning is crucial for the productivity. Meanwhile, the general equipment input planning is conducted by intuition based on experience due to the lack of equipment productivity data. Thus, this study develop a simulation model to analyze table formwork productivity and to propose an optimum equipment input plan that reflects the construction process, based on the full consideration of the economic factors. This study developed a simulation model by using CYCLONE and the data for the model was collected by measuring the duration of each unit activity in the tall building where table forms were applied. It is expected that a simulation model helps users to make better decision on the equipment input planning of slab formwork.

• 성인간호학회지
• /
• 제25권2호
• /
• pp.170-182
• /
• 2013

Purpose: This study investigated the effectiveness of simulation training with a hybrid model of student nurses' performance ability and reported self confidence. Methods: A nonequivalent control group with pre-posttest was designed. Data collection was done during the first semester in 2012 at a college of nursing in Seoul. Nursing performance ability and reported self confidence related to taking care of patients with urinary problems were evaluated. The treatment group (n=96) received simulation training of a catheterization procedure with a hybrid model involving standardized patients and a mannequin. Nursing students in the comparison group (n=84) did not receive the simulation training but would receive it prior to their next clinical practicum's. Results: The treatment group showed a significantly higher performance ability and reported self confidence than that of the comparison group. The perceived helpfulness and contentment of the simulation training in experimental group was high. Conclusion: The findings of this study demonstrated that simulation with a hybrid model was effective in teaching skills prior to the clinical experience which suggests that skill development is not dependent on the actual clinical situation. Nurse educators should consider simulation training as a tool beyond that of clinical practicum.

• Journal of Welding and Joining
• /
• 제20권4호
• /
• pp.544-550
• /
• 2002

Arc-spot welding is generally used in joining of precise parts such as case and core in electronic compressor. It is important to control joining deformation in electronic compressor because clearance control in micrometer order is needed for excellent airtightness and anti-nose. The countermeasures far this deformation in field have mainly been dependent on the rule of try and error by operator's experience because of productivities. For control this deformation problem without influence on productivities, development of exact simulation model should be needed. In this study, to solve this deformation problem in arc-spot welded structure with case and core, we intend to make a simulation model that is able to predict deformation in precise order by tuning and feedback between sensing data and simulation results. This paper include development of heat input model for arc-spot welding, temperature monitoring and make a heat transfer model using sensing data in product.

• 한국지열·수열에너지학회논문집
• /
• 제17권1호
• /
• pp.1-13
• /
• 2021

Before newly-built building and building remodeling, it is important to predict and analyze building energy performance through energy simulation programs. Nevertheless, simulation results widely vary depending on individual user experience and input values. Therefore, this study uses prototypical building model, a versatile tool in building energy modeling, simulation and research for researchers and policy-makers, and ASHRAE standards. Then, it analyzed the changes in design type (roof type, number of floors) for the base case. As the result, it was found that the gap of annual energy demand per between them is maximally 9.1%.

• International Journal of Control, Automation, and Systems
• /
• 제3권3호
• /
• pp.493-501
• /
• 2005

A power plant simulation tool ('PowerSim') has been developed with 10 years experience from the development of a plant simulator for efficient modeling of a power plant. PowerSim is the first developed tool in Korea for plant simulation with various plant component models, instructor station function and the Graphic Model Builder (GMB). PowerSim is composed of a graphic editor using general purpose design software, a netlist converter, component models, the scheduler, Instructor Station and an executive. The graphic editor generates a netlist that shows the connection status of the various plant components from the Simdiagram, which is drawn by Icon Drag method supported by GUI environment of the PowerSim. Netlist Converter normalizes the connection status of the components. Scheduler makes scheduling for the execution of the device models according to the netlist. Therefore, the user makes Simdiagram based on the plant Pipe and Instrument Drawing (P&ID) and inputs the plant data for automatic simulating execution. This paper introduces Graphic Model Builder (GMB), instructor station, executive and the detailed introduction of thermal-hydraulic modeling. This paper will also introduce basic ideas on how the simulation Diagram, based on netlist generated from general purpose design software, is made and how the system is organized. The developed tool has been verified through the simulation of a real power plant.

• 한국의류학회지
• /
• 제28권3_4호
• /
• pp.483-490
• /
• 2004

By using the formerly established SERVQUAL Model, measurement methods and determinant variables in the other papers for the Service Quality, this study first focuses to find out the difference consumers' evaluation between before-experience and after-experience of the educational service, and second, to examine the difference consumers' evaluation between before-experience and after-experience of the educational service according to pre-recognition degree for the subjected educational service quality. The results are derived as follows. 1. As a consequence of the simulation, the consumers distinctly tend to recognize importance of human concern and visual aspect after experience of educational service. 2. Between the group with more pre-recognition degree and less pre-recognition degree for the subjected educational service quality, have no difference.