Journal of the Korean Society for Geothermal and Hydrothermal Energy (한국지열·수열에너지학회논문집)

Korean Society for Geothermal and Hydrothermal Energy (한국지열·수열에너지학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Standard Heating and Cooling Load according to Design Factors using Prototypical Load Model

표준부하모델을 이용한 설계 변수에 따른 표준부하량 분석

  • Kim, Kwonye (Department of Architectural Engineering, Pusan National University) ;
  • Bae, Sangmu (Department of Architectural Engineering, Pusan National University) ;
  • Nam, Yujin (Department of Architectural Engineering, Pusan National University)
  • Received : 2020.11.06
  • Accepted : 2021.01.14
  • Published : 2021.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Before newly-built building and building remodeling, it is important to predict and analyze building energy performance through energy simulation programs. Nevertheless, simulation results widely vary depending on individual user experience and input values. Therefore, this study uses prototypical building model, a versatile tool in building energy modeling, simulation and research for researchers and policy-makers, and ASHRAE standards. Then, it analyzed the changes in design type (roof type, number of floors) for the base case. As the result, it was found that the gap of annual energy demand per between them is maximally 9.1%.

Keywords

References

  1. International Organization for Standardization (2007). Energy performance of buildings - calculation of energy use of space heating and cooling.
  2. ASHRAE Standard 90.1-2004 (2004). Energy standard for buildings except low-rise residential buildings.
  3. ASHRAE Standard 90.2-2004 (2004). Energy-efficient design of low-rise residential buildings.
  4. ASHRAE Standard 55-2013 (2013). Thermal environmental conditions for human occupancy
  5. ASHRAE Guideline 14-2002 (2002). Measurement of energy and demand savings.
  6. Augenbroe, B. J., Heo, Y. S., Kim, S. H., Li, Z., McManus, S., & Zhao, F. (2008). Lessons from an advanced building simulation course, The third national conference of IBPSA-USA, Berkeley, California.
  7. De Wilde, P., & Prickett, D. (2009). Preconditions for the use of simulation in M&E engineering. Proceddings of the 11th IBPSA Conference. 27-30. Glasgow. Scotland. 414-439.
  8. Seo, D., Rho, B., & Ihm, B. (2014). A Research on Prototypical Apartment House Definition for Detailed Building Energy Simulation, Journal of the Regional Association of Architectural Institute of Korea, Vol. 16, No. 6, pp. 285-296.
  9. Kim, S., Eum, J., & Kim, Y. (2017), A Regional Comparison of the Heating Energy using a Reference Model for Apartment Houses, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 29, No. 2, pp. 89-95.
  10. Park, D., Choi, S., Hwang, D., & Oh, M. (2019). A study on the Reference Building Model for the Selection of Unit Cooling Loads for Non-residential Buildings, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 31, No. 8, pp. 370-379. https://doi.org/10.6110/KJACR.2019.31.8.370
  11. Mun, S., & Huh, J. (2012). Analysis on the U-factor of window and the energy demand according to the window area in residential buildings, The Society of Air-Conditioning And Refrigerating Engineers of Korea Conference, 2012.6, 430-433
  12. Jeong, S., Park, H., & Lee, B. (2012). A study on analysis of energy consumption of Detached house by U-value and SCs of windows and Building Orientation, Journal of the Korean Solar Energy Society, Vol. 32, No. 3, pp. 96-130. https://doi.org/10.7836/kses.2012.32.3.096
  13. Lee, M., Kim, W., Lee, W., & Lee, W. (2012). A study Reduction Rates of Building Energy Demand for a Detached House according to Building Energy Efficient Methods, Journal fo the Architectural Insitute of Korea Planning & Design, Vol. 28, No. 5, pp. 275-282.
  14. Kim, S., Kim, J., Kim, D., Lee, K., & Park, J. (2012). A study on the Improvement of Heating System through Experiment and Simulation in Apartment House, Journal of the Architectural Insitute of Korea Planning & Design, Vol. 28, No. 7, pp. 253-260.
  15. Bae, M., & Kim, S. (2016). Evaluation and Alternative Searching Method of Building Envelope Design Parameters Considering Building Heating, Cooling and Lighting Energy use, Journal of the Architectural Institute of Korea Structure & Construction, Vol. 32, No. 11, pp. 45-53. https://doi.org/10.5659/JAIK_SC.2016.32.11.45
  16. U.S. Energy Information Administration (EIA), 2015 Residential Energy Consumption Survey from https://www.eia.gov
  17. Korea Energy Agency, from http://www.kemco.or.kr
  18. Raykov, D., & Marcoulides, G. (2013). Basic Statistics : An Introduction with R, ROWMAN & LITTLEFIELD PUBLISHERS, INC.