• 한국전자통신학회논문지
• /
• 제6권1호
• /
• pp.20-26
• /
• 2011

본 논문에서는 NM(node monitoring) 알고리듬과 NP(Piecewise Linear Function Approximation)를 사용해서 LDPC 코드 복호의 복잡도를 감소시키기 위한 효율적인 알고리듬을 제안한다. 이 NM 알고리듬은 새로운 node-threshold 방법과 message passing 알고리듬에 근거해서 제안되었는데, 이에 NP 방법을 사용해서 알고리듬의 복잡도를 더 줄일 수 있었다. 이 알고리듬의 효율성을 입증하기 위해서 모의 실험을 하였다. 모의실험결과, 기존에 잘 알려진 방법에 비해서 20% 정도 더 효율적이었다.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.40-47
• /
• 2003

This paper presents a new evaporative system monitoring method using a virtual HC sensor for an automotive on-board diagnosis. A development was made at providing mathematical expressions from the lambda control information to estimate the HC mass flow purged into the intake manifold from the canister for implementing a virtual HC sensor. The change of the lambda averagevalue reflected the influence of the additional fuel from purging results the sensor estimation of the purged HC amount. Based on this virtual HC sensor, a new evaporative system monitoring method was proposed comparing the amount of purged HC amount with the amount of the HC gas evaporated from the fuel tank and absorbed into the canister. Finally, the method was validated with a simulation using the data logged from the retail car.

• Journal of the Optical Society of Korea
• /
• 제14권1호
• /
• pp.22-27
• /
• 2010

Bit error rate (BER) monitoring is the ultimate goal of performance monitoring in all digital transmission systems as well as optical fiber transmission systems. To achieve this goal, optimization of the decision threshold must also be considered because BER is dependent on the level of decision threshold. In this paper, we analyze a pseudo-error counting scheme and propose an algorithm to achieve both BER monitoring and adaptive decision threshold optimization in optical fiber transmission systems. To verify the effectiveness of the proposed algorithm, we conduct computer simulations in both Gaussian and non-Gaussian distribution cases. According to the simulation results, BER and the optimum decision threshold can be estimated with the errors of < 20% and < 10 mV, respectively, within 0.1-s processing time in > 40-Gb/s transmission systems.

• 한국산업융합학회 논문집
• /
• 제23권6_1호
• /
• pp.889-896
• /
• 2020

We describe a new approach to the analyze the control performance of robotic manipulator based on the monitoring system. The structure of monitoring simulator is consist of seven modes such as control state mode, coordinate mode, input/output mode, program mode, parameters mode, and track mode. The applied control algorithme consists of an time varying feed-forward and feedback controller. The proposed scheme is simple in structure, fast in computation, and suitable for real-time implimemtation. Moreover, this scheme does not require any accurate dynamic modeling and values of parameters. Performance of the proposed monitoring system is illustrated by simulation and experiment for robot manipulator with six degrees of freedom.

• Communications for Statistical Applications and Methods
• /
• 제29권4호
• /
• pp.487-498
• /
• 2022

Social network analysis (SNA) techniques have recently been developed to monitor and detect abnormal behaviors in social networks. As a useful tool for process monitoring, control charts are also useful for network monitoring. In this paper, the degree and closeness centrality measures, in which each has global and local perspectives, respectively, are applied to an exponentially weighted moving average (EWMA) chart and a multinomial cumulative sum (CUSUM) chart for monitoring undirected weighted networks. In general, EWMA charts monitor only one variable in a single chart, whereas multinomial CUSUM charts can monitor a categorical variable, in which several variables are transformed through classification rules, in a single chart. To monitor both degree centrality and closeness centrality simultaneously, we categorize them based on the average of each measure and then apply to the multinomial CUSUM chart. In this case, the global and local attributes of the network can be monitored simultaneously with a single chart. We also evaluate the performance of the proposed procedure through a simulation study.

• 응용통계연구
• /
• 제29권7호
• /
• pp.1429-1444
• /
• 2016

본 연구에서는 벌점화 최소제곱추정방법을 이용하여 평균의 변화를 모니터링할 수 있는 방법에 대해 연구하였다. 모니터링 이전의 공통 평균과 모니터링을 시작한 이후 순차적으로 관측되는 관측값들의 평균의 차이를 벌점화 최소제곱추정방벙을 이용하여 추정하였으며, 이 추정값들에서 0이 아닌 것의 개수를 바탕으로 모니터링 절차를 개발하였다. 이는 기존의 모니터링 절차들이 순차적으로 얻은 추정값들의 변동성을 기반으로 만들어진 것과 다른 점이다. 모의실험을 통해 본 연구에서 제안한 모니터링 절차가 가지고 있는 특징들을 살펴보았고, 대표적인 모니터링 절차인 CUSUM 모니터링과 비교 분석도 하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.213-218
• /
• 2001

VR (Virtual reality) technologies have given engineers the ability to design, test, and evaluate engineering systems in a virtual environment. The virtual plant is the highlight of the application of the VR technology to plant engineering. Plant design, maintenance, control, management, operation are integrated in the virtual plant. The VR monitoring system including the concept of the virtual plant is developed to replace a current control room that has number of gages and warning lamps in two-dimensional panels which shows the operating status of a plant. The operating status of the plant is displayed in the VR monitoring system through the realistic computer graphics. Sophisticated, realistic and prompt control becomes possible. The VR monitoring system consists of advanced visualization, walk-through simulation and navigation. In the virtual environment, a user can navigate and interact with each component of a plant. In addition, the user can access the information by just clicking interesting component. The VR monitoring system is operated with various modules, such as (1) virtual plant constructed with Graphic Management System (GMS), (2) Touch & Tell System, and (3) Equipment DB System of Part. In order to confirm the usefulness of the VR monitoring system, a pilot gas plant which is currently being used for plant operator training is taken as application. The end of the paper gives an outlook on the future work and a brief conclusion.

• 한국농공학회논문집
• /
• 제58권5호
• /
• pp.19-28
• /
• 2016

This study was to design the optimal locations of the water level monitoring to quantify the agricultural water use in irrigation area supplied from an agricultural reservoir. In most of agricultural areas without TM/TC (Tele-Monitoring and Tele-Control) or monitoring network, irrigation water have been supplied on conventional experience and agricultural reservoir have been operated based on the operating simulation results by HOMWRS (Hydrological Operation Model for Water Resources System). Therefore, this study quantified the amount of agricultural water use in an irrigation area (Musu Reservoir, Jincheon-gun) by establishing water level monitoring network and analyzed the agricultural water saving effect. According to the evaluation of the economic values for water saving effect, the saving agricultural water of 1.7 million ton was analyzed to have economic values of 0.85 million won as water for living, and 1.78 million won as water for industrial use. It is identified to secure economic feasibility of the new water monitoring network by establishing one monitoring point in the entrance, irrigation area and endpoint through the economic analysis.

• 한국생태학회:학술대회논문집
• /
• 한국생태학회 1998년도 춘계공동 학술발표대회
• /
• pp.77-77
• /
• 1998

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권4호
• /
• pp.418-424
• /
• 2013

센서네트워크 라우팅 프로토콜에 있어서 시뮬레이션과 물리적 구현은 모두가 중요한 작업이다. 본 연구에서는 무선센서네트워크를 이용하여 여러 제약조건 내에서 효과적인 지하매설물 감시 방법을 제안한다. 먼저 적용 대상 네트워크의 프로토콜을 물리적으로 구현하기 위해서 센서 네트워크 라우팅 프로토콜의 기존 nesC 코드를 적용하는 분산 이벤트기반 시뮬레이션을 구현하고 분석하였다. 또한, TOSSIM[2]과 분산이벤트 기반의 Ptolemy II를 연동한 VIPTOS(Visual Ptolemy and TinyOS)환경에서 지하 매설물 감시를 위한 라우팅프로토콜 응용모델의 시뮬레이션을 수행하고 실행결과를 분석하였다.