• 한국지반공학회논문집
• /
• 제15권3호
• /
• pp.27-40
• /
• 1999

사면안정해석을 수행하기 위하여 많이 사용하는 한계평형방법은 일정한 가정을 하여 안전율을 평형에 필요한 응력과 흙의 전단강도의 비로 정의하여 대상사면의 안전율을 구한다. 유한요소법을 이용한 사면안정해석방법은 응력상태를 유한요소법으로 구한 후 원호나 대수나선형등의 일정한 모양의 사면 파괴선을 가정하여 반복적으로 최소안전율을 구한다. 본 연구에서는 유한요소법을 이용한 사면안정해석방법을 개발하여 사면의 가장 취약한 부분을 따라 파괴선이 발생하도록 하였다. 이것은 요소내의 국부안전율과 파괴각을 고려하여 사면파괴선을 자동적으로 구할 수 있도록 함으로써 가능한데 이 방법은 임의의 파괴선을 가정할 필요가 없으며 절편에 작용하는 힘에 대하여 가정을 할 필요가 없고 임의의 모양의 파괴선을 구할 수 있는 장점이 있다. 본 연구에서는 개발된 해석방법을 검증하기 위하여 가상의 사면, 자연사면, 그리고 댐사면에 적용하여 실무에서 많이 사용하는 한계평형방법 프로그램인 STABL5M과 SLOPE/W과 비교 평가하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2010년도 정기 학술대회
• /
• pp.268-271
• /
• 2010

In this paper, forward and reverse analysis is introduced in order to estimate the elastic-plastic properties from a power-law hardening bulk specimen materials with one simple spherical indentation impression test. In order to verify the reliability of the reverse analysis, we have simulated about a large range of materials that essentially cover all engineering materials, using ABAQUS(6.91) program. Then, we could obtained the fitting functions and plastic parameters from the numerical analysis results. Next, through the procedure of reverse analysis we can obtain the yield stress and power-law exponent. Finally, obtain good agreement between the result from reverse analysis and initial input data from experiment.

• 한국전산구조공학회논문집
• /
• 제16권2호
• /
• pp.125-131
• /
• 2003

본 논문에서는 중고주파수 영역에서 진동하는 단순평판의 진동을 해석하기 위하여 파워흐름유한요소법을 적용하였다. 파워흐름해석법에서 주어지는 진동 에너지지배방정식의 해를 구하기 위한 수치해석 도구로써 유한요소법을 활용하였다. 이러한 파워흐름유한요소법을 적용하여 중고주파수 영역에서 진동하는 단순평판의 진동 변위와 진동인텐시티 분포를 구하였다. 또한 수치해 결과를 엄밀해와 유한요소법에 의한 근사해와 비교함으로써, 파워흐름유한요소법은 중고주파수 영역에서 진동 변위 및 진동 인텐시티를 예측하기 위하여 효과적으로 적용될 수 있음을 보였다.

• 대한토목학회논문집
• /
• 제14권5호
• /
• pp.1229-1241
• /
• 1994

본 연구는 탄 소성이론에 기초를 둔 Lade의 단일항복면 구성모델을 이용하여 정규압밀 점토지반의 비배수 거동을 연구한 것이다. 시료는 영산강 하류에서 채취한 무안 점토를 재생성시켜 동방압축팽창시험과 압밀비배수 삼축압축시험을 하여 이 구성모델에 필요한 11개의 토질매개변수를 결정하였다. 또한 비배수거동해석을 위한 유한요소 프로그램을 개발하였으며, 프로그램의 정도를 검증하기 위하여 매개변수결정에 사용된 시험결과를 역해석하였다. 그리고 2차원 모형지반에 재하시험을 실시하고 결과를 유한요소 프로그램으로 수치해석하여 서로 비교 검토하였다.

• 한국지반공학회지:지반
• /
• 제13권5호
• /
• pp.35-44
• /
• 1997

도심지 지반굴착 해석을 위한 전용 유한요소 프로그램(EM)을 개발하였다. 기존 범용 프로그램과는 달리 사용자가 간단한 입력자료를 작성하고 전.후처리는 자동으로 도화 출력되므로 굴 착해석에 쉽게 사용될 수 있도록 하였다. 특히, 새로 개발된 GDHM재료모델 ((GDHM, General ized Decoupled Hyperbolic Model)은 8면체평면상에서의 응력경로에 따른 강도변화를 고려하였다. 개발된 EM프로그램은 대형 굴착토조모형실험 결과와 비교 검토함으로서 개발된 재료모델과 굴착전용프로그램의 신뢰성을 검증하여 비교적 정확도가 높은 결과를 얻었고, 향후 미비점을 보완, 개선하여야 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.123-125
• /
• 2001

Salient pole rotor type single phase SRM(switched reluctance motor) uses the magnetic fluxes of radial and axial direction at the same time. Therefore the output power per unit volumn is very high and shaft length can be shorter than any other types of SRM with same output. Also, It can be manufactured with low cost thanks to simple structure and driving circuit. We already designed and manufactured prototype using the dynamic output equation of general rotating machine but the effect by salient pole structure was not considered. The most optimal design parameters for salient pole rotor type single phase SRM will be selected by comparing and analyzing the results from 3D FEM analysis, experimental values of the torque versus speed characteristics. and the nux linkage of prototype. Results for the former 3D FEM analysis and torque vs. speed characteristics were already obtained. Finally, we will measure the nux linkage of salient pole rotor type single phase SRM.

• Steel and Composite Structures
• /
• 제49권2호
• /
• pp.231-244
• /
• 2023

Many of the recent investigations in the field of geotechnical engineering focused on the bearing capacity theories of multilayered soil. A number of factors affect the bearing capacity of the soil, such as soil properties, applied overburden stress, soil layer thickness beneath the footing, and type of design analysis. An extensive number of finite element model (FEM) simulation was performed on a prototype slope with various abovementioned terms. Furthermore, several non-linear artificial intelligence (AI) models are developed, and the best possible neural network system is presented. The data set is from 3443 measured full-scale finite element modeling (FEM) results of a circular shallow footing analysis placed on layered cohesionless soil. The result is used for both training (75% selected randomly) and testing (25% selected randomly) the models. The results from the predicted models are evaluated and compared using different statistical indices (R² and RMSE) and the most accurate model BBO (R²=0.9481, RMSE=4.71878 for training and R²=0.94355, RMSE=5.1338 for testing) and TLBO (R²=0.948, RMSE=4.70822 for training and R²=0.94341, RMSE=5.13991 for testing) are presented as a simple, applicable formula.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.186-192
• /
• 1999

Safety-related equipments of nuclear power plant must be seismically qualified to demonstrate their ability to function as required during and/or after the earthquake, The seismic qualification is usually achieved through analysis and testing. Analysis method is preferably adopted for structurally simple equipments which are easy to be mathematically modeled. However even for relatively complex equipments analysis method is occasionally used for computing the input motion or supporting information for the component test followed. Electrical cabinet is a typical example for which analysis method is combinedly used with test to get modal properties of the enclosing cabinet structure. Usually the structural elements and doors of the cabinet are loosely interconnected with small-size bolts or spot welding. Therefore cabinet-type equipment usually has high and complex nonlinear properties which are not easily idealized by simple practical modeling techniques. in this paper with respect to a typical cabinet-type structure(instrumentation cabinet of nuclear power plant) a comparative study has been performed between three different state-of-the -art modeling techniques: lumped mass model frame model and FEM modal. Form the study results it has been found that modal properties of the cabinet-type structure in the elastic behavior range can be reasonably computed through any type of modeling techniques in the practice with slight modification of model properties to get better accuracy. However it needs additional modeling techniques to get reasonable results up to nonlinear range.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.668-673
• /
• 2005

This paper proposes a simple actuator with a spherical rotor for robot's eyeball, which has two degrees of freedom. It features that both permanent magnets and coils are equipped in a stator and the spherical rotor with steps on its surface is driven by reaction of Lorentz force acting on the fixed coils. Such a structure is helpful to design a simple actuator and particularly suitable for a spherical actuator. Based on the FEM analysis, design parameters such as the sizes of core and permanent magnet, the width of step, coil turns and maximum current, are determined so as to maximize the torque and rotating angle. For the experimental verification of the feasibility, a prototype is manufactured and its operating characteristicsareinvestigated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.88-90
• /
• 2003

SRM has a characteristic of a robust, simple structure and wide operating ranges. So, recently it has studied and developed in many kinds and forms with the technology of power electronics and analysis and design by use of computer. Also, It is used in a very wide range of industrial applications. In particular, single phase switched reluctance motor has a merit in practical use because it has simple operating drives and control systems, very high energy density per unit volume comparing with three phase SRM. But it must have a starting device. In this paper design procedures of single phase SRM development for blower drives are presented. It is selected the design parameters by compared with design theory of general electric machine and poly phase SRM. Also it is simulated the designed prototype model by FEM for the prediction of characteristics.