• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.295-301
• /
• 2001

For the seismic analysis of typical roadway bridges provisions are given in most codes for analysis models, which describes however only fundamental modelling methods according to the basic theories of structural dynamics. In practice even conventional non-seismic analysis models, separate super- and substructure models, are applied, which are not adequate because of neglecting connection elements. In this study three typical roadway bridges, a Steel box bridge, a PC beam bridge and a PC box bridge are selected and simple models integrating super- and substructure as well as connection elements are given. The simple models are composed with frame elements with lumped masses representing stiffness and mass characteristics of the selected bridges. To check the properness of the simple models, analysis results with the simple models are compared with those obtained with detailed models in view of bridge failure mechanisms. It is proved that the simple models can be used in the preliminary design phase fur the determination of failure mechanisms of typical roadway bridges.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.2
• /
• pp.70-79
• /
• 2020

The offshore installation units may be subjected to various accidental loads such as collision from supply vessels, impact from dropped objects, blast load from gas explosion and thermal load from fire. This paper deals with the design and strength evaluation method of the stiffened plate structures in response to a blast load caused by a gas explosion accident. It is a comprehensive review of various items used in actual project such as the size and type of the explosive loads, general design procedure/concept and analysis method. The structural analyses using simple analysis methods based on SDOF model and nonlinear finite element analysis are applied to the particular FPSO project. Also validation studies on the design guidance given by simple analysis method based on SDOF model have also considered several items such as backpressure effects, material behavior and duration time of the overpressure. A good correlation between the prediction made by simple analysis method based on SDOF model and nonlinear finite element analysis can be generally obtained up to the elastic limit.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.11
• /
• pp.498-504
• /
• 2006

This paper describes the simple payback period analysis of small co-generation system based on the existing apartment and building data. First, We investigate apartment and building data more than $2000[m^2]$ using Ministry of Construction & Transportation's computer system. And then we calculate the latent amount of small co-generation system considering gas company and CHP. Second, we classify the latent amount of small co-generation system into office, hospital, hotel, department store, complex building and apartment. Finally, we perform the simple payback period analysis for small co-generation system. The results show the simple payback period of small co-generation system is less then 10 years.

• Journal of the Korean Statistical Society
• /
• v.28 no.3
• /
• pp.337-346
• /
• 1999

Simple correspondence analysis is a technique for giving a joint display of points representing both the rows and columns of an n$\times$p two-way contigency table. In simple correspondence analysis, the singular value decomposition is the main algebraic tool. But, Choi and Huh(1996) pointed out the singular value decomposition is not robust. Instead, they developed a robust singular value decomposition and provided applications in principal component analysis and biplots. In this article, by using the analogous procedures of Choi and Huh(1996), we derive a robust version of simple correspondence analysis.

• Communications for Statistical Applications and Methods
• /
• v.12 no.1
• /
• pp.199-205
• /
• 2005

In general, simple correspondence analysis has handled mainly correspondence relations between the row and column categories but can not display the trends of their change over the time. For solving this problem, we will propose DSCA(Dynamic Simple Correspondence Analysis) of transition matrix data using supplementary categories in this study, Moreover, DSCA provides its trend of the change for the future by predicting and displaying trend toward the change from a standard point of time to the next.

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.23-29
• /
• 2013

PURPOSES: This paper aims to give a guideline and the way to apply the advanced composite materials theory to the road structures with different cross sections to the practicing engineers. METHODS: To simple but exact method of calculating natural frequencies corresponding to the modes of vibration of road structures with different cross sections and arbitrary boundary conditions. The effect of the $D_{22}$ stiffness on the natural frequency is rigorously investigated. RESULTS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. CONCLUSIONS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. This method is a simple but exact method of calculating natural frequencies of the road structures with different cross sections. This method is extended to be applied to two dimensional problems including composite laminated road structures.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.8
• /
• pp.1299-1312
• /
• 2004

This paper suggests the simple form of a fuzzy PID controller and describes the design principle, tracking performance, stability analysis and changes of parameters of a suggested fuzzy PID controller. A fuzzy PID controller is derived from the design procedure of fuzzy control. It is well known that a fuzzy PID controller has a simple structure of the conventional PID controller but posses its self-tuning control capability and the gains of a fuzzy PID controller become nonlinear functions of the inputs. Nonlinear calculation during fuzzification, defuzzification and the fuzzy inference require more time in computation. To increase the applicability of a fuzzy PID controller to digital computer, a simple form of a fuzzy PID controller is introduced by the backward difference mapping and the analysis of the fuzzy input space. To guarantee the BIBO stability of a suggested fuzzy PID controller, ‘small gain theorem’ which proves the BIBO stability of a fuzzy PI and a fuzzy PD controller is used. After a detailed stability analysis using ‘small gain theorem’, from which a simple and practical method to decide the parameters of a fuzzy PID controller is derived. Through the computer simulations for the linear and nonlinear plants, the performance of a suggested fuzzy PID controller will be assured and the variation of the gains of a fuzzy PID controller will be investigated.

• The Korean Journal of Applied Statistics
• /
• v.25 no.3
• /
• pp.521-529
• /
• 2012

Simple canonical correlation biplot is a graphical method to investigate two sets of variables and observations in simple canonical correlation analysis. If we consider the set of covariate variables that linearly affects two sets of variables, we can apply the partial canonical correlation biplot in partial canonical correlation analysis that removes the linear effect of the set of covariate variables on two sets of variables. On the other hand, we consider the set of covariate variables that linearly affect one set of variables but not the other. In this case, if we apply the simple or partial canonical correlation biplot, we cannot clearly interpret other two sets of variables. Therefore, in this study, we will apply the semi-partial canonical correlation analysis of Timm (2002) and remove the linear effect of the set of covariate variables on one set of variables but not the other. And we suggest the semi-partial canonical correlation biplot for interpreting the semi-partial canonical correlation analysis. In addition, we will compare shapes and shape the variabilities of the simple, partial and semi-partial canonical correlation biplots using a procrustes analysis.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.696-699
• /
• 2004

Generally, the time history analysis among seismic response analyses of a structure needs more times than static analysis. Therefore the mechanical model of a structure has been used as a simple lumped parameter model in time history analysis. For the most cases, the simple mechanical model shows the similar results to that of detailed finite element model. so it is reasonable to use the simple mode] in preliminary analysis. In seismic design of liquid storage tank, such as LNG storage tank, the lumped parameter mode] also is being used in preliminary analysis, however sometimes shows the differences to the results of detailed finite element model. Therefore in this study, the dynamic characteristics between lumped parameter model and detailed finite model is compared for the variables such as height/diameter of liquid-storage tank and thickness of wall, then the applicability of beam mode] to the seismic response analysis are evaluated for some liquid storage tanks.

• Korean Journal of Veterinary Research
• /
• v.53 no.2
• /
• pp.73-76
• /
• 2013

The aim of this study was to produce a simple and inexpensive technique for estimating the obturator foramen area (OFA) from young calves based on the hypothesis that OFA can be extrapolated from simple linear measurements. Three linear measurements - dorsoventral height, craneocaudal width and total perimeter of obturator foramen - were obtained from 55 bovine hemicoxae. Different algorithms for determining OFA were then produced with a regression analysis (curve fitting) and statistical analysis software. The most simple equation was OFA ($mm^2$) = [3,150.538 + ($36.111^*CW$)] - [147,856.033/DH] (where CW = craneocaudal width and DH = dorsoventral height, both in mm), representing a good nonlinear model with a standard deviation of error for the estimate of 232.44 and a coefficient of multiple determination of 0.846. This formula may be helpful as a repeatable and easily performed estimation of the obturator foramen area in young bovines. The area of the obturator foramen magnum can thus be estimated using this regression formula.