• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.105-113
• /
• 2010

In this paper, a 1.485 Gbps video signal transmission system using the carrier frequency of 240 GHz band was designed and simulated. The sub-harmonic mixer based on Schottky barrier diode was simulated in the transmitter and receiver. Both of heterodyne and direct detection receivers were simulated for each performance analysis. The ASK modulation was used in the transmitter and the envelop detection method was used in the receiver. The transmitter simulation results showed that the RF output power was -11.4 dBm($73{\mu}W$), when the IF input power was -3 dBm(0.5 mW) at the LO power of 7 dBm(5 mW) in sub-harmonic mixer, which corresponds to SSB(Single Side Band) conversion loss of 8.4 dB. This value is similar to the conversion loss of 8.0 dB(SSB) of VDI's commercial model WR3.4SHM(220~325 GHz) at 240 GHz. The combined transmitter and receiver simulation results showed that the recovered signal waveforms were in good agreement to the transmitted 1.485 Gbps NRZ signal.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.77-81
• /
• 2014

This paper propose a method to detect moving object and locating in real time from video sequence. first the proposed method extract moving object by differencing two consecutive frames from the video sequence. If the interval between captured two frames is long, it cause to generate fake moving object as tail of the real moving object. secondly this paper proposed method to overcome this problem by using doppler effects and HSV color model. finally the object segmentation and locating is done by combining the result that obtained from steps above. The proposed method has 99.2% of detection rate in practical and also this method is comparatively speed than other similar methods those proposed in past. Since the complexity of the algorithm is directly affects to the speed of the system, the proposed method can be used as low complexity algorithm for real time moving object detection.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.104-114
• /
• 2016

Potholes have caused diverse problems such as wheel damage and car accident. A pothole detection technology is the most important to provide efficient pothole maintenance. The previous pothole detections have been performed by manual reporting methods. Thus, the problems caused by potholes have not been solved previously. Recently, many pothole detection systems based on video cameras have been studied, which can be implemented at low costs. In this paper, we propose a new pothole detection algorithm based on saliency map information in order to improve our previously developed algorithm. Our previous algorithm shows wrong detection with complicated situations such as the potholes overlapping with shades and similar surface textures with normal road surfaces. To address the problems, the proposed algorithm extracts more accurate pothole regions using the saliency map information, which consists of candidate extraction and decision. The experimental results show that the proposed algorithm shows better performance than our previous algorithm.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1547-1556
• /
• 2009

In this paper, we propose a flame detection method using region expansions and on-line variances in outdoor infrared video sequences. To segment flame candidates' regions in infrared images, we first, extract initial regions by high threshold values in infrared images and then the segmented regions are expanded to their neighbors with similar high intensity values. The segmented regions could be non-flame areas like bare-grounds and buildings. Therefore, to detect flame regions in the segmented regions, the segmented regions which have high intensity values in infrared image, are tracked using bounding regions in frame sequences. Variances in the tracked regions are calculated effectively by on-line updates to measure intensity variations on the tracked regions. Experiments show that the proposed method, which is based on region expansions and the average of on-line variances in the regions, is efficient to detect flames in infrared image.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1649-1656
• /
• 2016

Performance of the existing sensor-based fire detection system is limited according to factors in the environment surrounding the sensor. A number of image-based fire detection systems were introduced in order to solve these problem. But such a system can generate a false alarm for objects similar in appearance to fire due to algorithm that directly defines the characteristics of a flame. Also fir detection systems using movement between video flames cannot operate correctly as intended in an environment in which the network is unstable. In this paper, we propose an image-based fire detection method using CNN (Convolutional Neural Network). In this method, firstly we extract fire candidate region using color information from video frame input and then detect fire using trained CNN. Also, we show that the performance is significantly improved compared to the detection rate and missing rate found in previous studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.50-59
• /
• 2007

In this paper, an anchor shot detection method, which is a basic technology for managing news videos for index and retrieval purposes is proposed. To do that, two most popular news program such as 'KBS 9 Hour News' and 'MBC 9 Hour News' are analyzed and 4-step rule based detection method is proposed First, in the preprocessing, video shot boundaries are detected and the 1st frame of each shot is extracted as a key frame. Then, the detected shot is declared as an anchor shot, if all the following 4 conditions are satisfied. 1) There is an anchor face in the key frame of a shot. 2) Spatial distribution of edges in the key frame is adequate. 3) Background color information of the key frame is similar to the color information of an anchor model. 4) Motion rate in the shot is low. In order to show the validity of the proposed method, three 'KBS 9 Hour News' and three 'MBC 9 Hour News', which have total running time of 108 in minute and are broadcasted at different days, are used for experiments. Average detection rates showed 0.97 in precision, 1.0 in recall, and 0.98 in F-measure.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.1
• /
• pp.30-38
• /
• 2003

This paper presents an efficient region-based motion segmentation method for segmenting of moving objects in a traffic scene with a focus on a Video Monitoring System (VMS). The presented method consists of two phases: motion detection and motion segmentation. Using the adaptive thresholding technique, the differences between two consecutive frames are analyzed to detect the movements of objects in a scene. To segment the detected regions into meaningful objects which have the similar intensity and motion information, the regions are initially segmented using a k-means clustering algorithm and then, the neighboring regions with the similar motion information are merged. Since we deal with not the whole image, but the detected regions in the segmentation phase, the computational cost is reduced dramatically. Experimental results demonstrate robustness in the occlusions among multiple moving objects and the change in environmental conditions as well.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.76-84
• /
• 2014

As the number of high-density videos increase, parallel processing approaches are necessary to process a large-scale of video data. When a processing method of video data requires thousands of simple operations, GPU-based parallel processing is preferred to CPU-based parallel processing by way of reducing the time and space complexities of a given computation problem. This paper studies the parallel design and implementation of a shot-boundary detection algorithm. The proposed shot-boundary detection algorithm uses pixel brightness comparisons and global histogram data among the blocks of frames, and the computation of these data is characterized with the high parallelism for the related operations. In order to maximize these operations in parallel, the computations of the pixel brightness and histogram are designed in parallel and implemented in NVIDIA GPU. The GPU-based shot detection method is tested with 10 videos from the set of videos in National Archive of Korea. In experiments, the detection rate is similar but the computation time is about 10 time faster to that of the CPU-based algorithm.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.35-44
• /
• 2004

With increase in digitalmedia data, various video indexing and video sequence matching algorithms have been proposed to efficiently manage and utilize digital media. In this paper, we propose a robust video indexing algorithm to detect scene changes for video sequences with abrupt luminance variations and an efficient video sequence matching algorithm for video sequence query. To improve the accuracy and to reduce the computational complexity for video indexing with abrupt luminance variations, the proposed algorithm utilizes edge features as well as color features, which yields a remarkably better performance than conventional algorithms. In the proposed algorithm first we extract the candidate shot boundaries using color histograms and then determine using edge matching and luminance compensation if they are shot boundaries or luminance changes. If the scene contains trivial brighness variations, the edge matching and luminance compensation are performed only for shot boundaries. In experimental results, the proposed method gives remarkably a high performance and efficiency than the conventional methods with the similar computational complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1193-1202
• /
• 2004

While the management of digital contents is getting more and more important, many researchers have studied about scene change detection algorithms to reduce similar scenes in the video contents and to efficiently summarize video data. The algorithms using histogram and pixel information are found out as being sensitive to light changes and motion. Therefore, visual rhythm gets used in recent work to solve this problem, which shows some characteristics of scenes and requires even less computational power. In this paper, a new scene detection algorithm using visual rhythm by direction is proposed. The proposed algorithm needs less computational power and is able to keep good performance even in the scenes with motion. Experimental results show the performance improvement of about 30% comparing with conventional methods with histogram. They also show that the proposed algorithm is able to keep the same performance even to music video contents with lots of motion.