• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.68.2-68.2
• /
• 2014

High Frequency Peakers (HFPs) are radio-loud Active Galactic Nuclei (AGN), which are regarded as being in the earliest evolutionary phase (102-103 years) of radio galaxies. They are expected to be small in size (< ~1 kpc) compared to their host galaxies (~a few 10s kpc), and have convex spectra, which are peaking at high radio frequency (> 5 GHz). Their size and spectral shape are the most obvious supporting evidence of extremely young ages. HFPs are therefore ideal targets to probe the earliest stage of radio sources. To date however, the young radio source classification has been relying mainly on the spectral shape which usually does not cover high enough frequencies where the true peak flux is located. Hence HFPs are often confused with blazars which may show a similar spectral shape and apparent compactness but are a somewhat evolved form of AGNs. Therefore, we have been challenging to identify HFPs among the sample of 19 candidates using the Korean VLBI Network (KVN) which enables us to extend the radio spectrum baseline up to 22 and 43 GHz. These are higher than the frequencies used in most previous studies of HFPs, allowing us to select genuine HFPs. By long-term monitoring of 18 epochs, we have also inspected the variability of the sample to select out blazars which are highly variable yet with a similar radio spectrum. In this work, we present the light curves and spectral properties of the HFP candidates. We discuss the results of our re-identification of HFPs.

• Journal of Korean Medical classics
• /
• v.33 no.1
• /
• pp.61-80
• /
• 2020

Objectives : To clarify the construction, changes, and contents of the diagrams of spleen through comparison of 30 different diagrams originated from Mingtangzangfutu. Methods : The diagrams were analyzed in whole shape, ratio between width and height, shape of the lower part, and concavo-convex of the middle part, then matched to the characteristics of the section diagram. The contents of the diagram of the spleen were newly interpreted with comparison to the classical texts. Results : The whole shape is described to be a long sword, long stick, bottle gourd, western pear, sole of feet. The height to width ratio was mostly above 4.0:1, but those listed in the 『Bianquemaishunaning』 and 『Hehensancaituhui』 were 1.9:1~1.0:1, most similar to the numbers described in the 『Nanjing』. The shape of the lower part was narrow and sharp, narrow and flat or wide and flat. To analyze through affiliation characteristic, properties of other affiliations could be found. In comparison to classical texts, the diagrams could be found to be affected by 『Nanjing』 and Wangbing's annotations. The diagrams of the spleen should be composed of the spleen, the cord of spleen, and Sangao(散膏); but those which distinguish the spleen and the cord of spleen are twelve. The description of its shape as being similar to sword or sickle seems to come from Lichan's misunderstanding of the diagram in 『Zhenjiujuying』. Those that mention Sangao are merely two and their opinion on the position are different from each other; both did not identify it with the pancreas. Conclusions : In the process of the diagrams differentiating into 30 they were affected by the classical texts. The various changes seem to come from difference in understanding of the content composition of the diagram of the spleen.

• Journal of Welding and Joining
• /
• v.27 no.3
• /
• pp.73-79
• /
• 2009

This present paper investigated the mechanical properties and the microstructures of each penetration shapes classifying the conduction shape area and the keyhole shape area about electron beam welded 120(T)mm thick plated aluminum 5052 112H. As a result the penetration depth is increased linearly according to the output power, but the aspect ratio is decreased after the regular output power. In the conduction shape area, the Heat affected zone is observed relatively wider than the keyhole shape area. In the material front surface of the welded specimen, the width is decreased but the width in the material rear surface is increased. After the measuring the Micro Vikers Hardness, it showed almost similar hardness range in all parts, and after testing the tensile strength, the ultimate tensile strength is similar to the ultimate tensile strength of the base material in all the specimens, also the fracture point was generated in the base materials of all the samples. In the result of the impact test, impact absorbed energy of the Keyhole shape area is turned up very high, and also shown up the effect about four times of fracture toughness comparing the base material. In the last result of observing the fractographs, typical ductile fraction is shown in each weld metal, and in the basic material, the dimple fraction is shown. The weld metals are shown that there are no other developments of any new chemical compound during the fastness melting and solidification.

• Journal of the Korean Society of Food Culture
• /
• v.35 no.6
• /
• pp.538-552
• /
• 2020

Tis study was an attempt to systematically analyze the characteristics of modern Korean food styling using the menu image photos of the Michelin Guide Seoul 2020 restaurants. The first sampling was conducted on the 27th of March 2020 and the second on the 27th of October 2020. A collection of images on the web and 442 photographic cases obtained by a search through theoretical background literature and research papers were studied by a qualitative analysis method. First, the food styling contents were analyzed and based on that, the food styling characteristics of the menus of 11 restaurants in Korea including the contemporary restaurants were considered. The analysis revealed several aspects of Korean food styling. First, food styling appeared to have three major characteristics: color, shape, and container styling. Color styling was further subdivided into single color/similar color, color contrast, source type, and accent color type. The shape/formative styling was classified into figure type, shape type, accessory type, and garnish type, and container styling was categorized as container color type, container shape type, and container material type. Second, the modern Korean food color styling characteristics of Michelin restaurants were categorized in the order of monochromatic/similar type, sauce type, accent color type, and color contrast. In the formative styling category, it was categorized in the order of shape type, small piece type, garnish/garnish type, and figure type. In container styling, container material type and formative type accounted for the major portion of the category. The food styling characteristics of the modern Korean menu were systematized and image examples were presented visually. Please use it as food styling educational material or personal food styling skill.

• Advances in concrete construction
• /
• v.13 no.2
• /
• pp.199-213
• /
• 2022

Experimental and discrete element approaches were used to examine the effects of F shape non-persistent joints on the failure behaviour of concrete under uniaxial compressive test. concrete specimens with dimensions of 200 cm×200 cm×50 cm were provided. Within the specimen, F shape non-persistent joint consisting three joints were provided. The large joint length was 6 cm, and the length of two small joints were 2 cm. Vertical distance between two small joints change from 1.5 cm to 4.5 cm with increment of 1.5 cm. In constant joint lengths, the angle of large joint change from 0° to 90° with increments of 30°. Totally 12 different models were tested under compression test. The axial load rate on the model was 0.05 mm/min. Concurrent with experimental tests, numerical simulation (Particle flow code in two dimension) were performed on the models containing F shape non-persistent joint. Distance between small joints and joint angles were similar to experimental one. the results indicated that the failure process was mostly governed by both of the Distance between small joints and joint angles. The axial loading rate on the model was 0.05 mm/min. The compressive strengths of the samples were related to the fracture pattern and failure mechanism of the discontinuities. Furthermore, it was shown that the compressive behaviour of discontinuities is related to the number of the induced tensile cracks which are increased by increasing the joint angle. In the first, there were only a few acoustic emission (AE) hits in the initial stage of loading, and then AE hits rapidly grow before the applied stress reached its peak. Furthermore, a large number of AE hits accompanied every stress drop. Finally, the failure pattern and failure strength are similar in both approaches i.e., the experimental testing and the numerical simulation approaches.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.7-14
• /
• 2006

Detection and identification of targets from remotely sensed imagery are of great interest for civilian and military application. This paper presents an algorithm for target detection in high spatial resolution imagery based on the spectral and the dimensional characteristics of the reference target. In this algorithm, the spectral and the dimensional information of the reference target is extracted automatically from the sample image of the reference target. Then in the entire image, the candidate target pixels are extracted based on the spectral characteristics of the reference target. Finally, groups of candidate pixels which form isolated spatial objects of similar size to that of the reference target are extracted as detected targets. The experimental test results showed that even though the algorithm detected spatial objects which has different shape as targets if the spectral and the dimensional characteristics are similar to that of the reference target, it could detect 97.5% of the targets in the image. Using hyperspectral image and utilizing the shape information are expected to increase the performance of the proposed algorithm.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.721-727
• /
• 2000

Impedance method was carried out to design the electrode that can measure the void fraction of the bubbly flow in pool reservoir. To find out the optimum electrode shape, Styrofoam-tests were performed in a specially designed acrylic reservoir. Three kinds of electrodes were designed to compare the characteristics of water-air flow. The resistance was increased as the void fraction increased and the capacitance was decreased as the void fraction increased. The resistance is a main parameter to express the nature of the water-air flow in impedance method. Almost all the values of impedance were involved in resistance. The degree of deviation from the mean-resistance values showed reasonable results. Electrode type-I expressed excellent results among the three electrode shapes. The impedance values in void fraction 0-10% were similar to those of Maxwell's equation. But the impedance values in void fraction 10-20% were not similar to those of Maxwell' equation because of the edge effect near electrode.

• Animal Systematics, Evolution and Diversity
• /
• v.31 no.1
• /
• pp.8-14
• /
• 2015

Five new species of the genus Hyattella (Dictyoceratida: Spongiidae); Hyattella chaguiensis n. sp., H. munseomensis n. sp., H. sumsangiensis n. sp., H. bakusi n. sp., and H. purpurea n. sp., were collected from Jeju-do, Korea. Hyattella chaguiensis n. sp. is similar to H. mara Sim and Lee, 2014 in shape, but differs in dermal membrane and primary fibres. Hyattella munseomensis n. sp. differs in cored primary fibres, having middle-size sand. Hyattella sumsangiensis n. sp. is characterized by color changes and very soft texture. Hyattella bakusi n. sp. and H. purpurea n. sp. are similar in shape, having tube-like elevated holes, but differ in skeletal structures.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.05a
• /
• pp.482-484
• /
• 2019

Learning and analyzing 3D point clouds with deep networks is challenging due to the limited and irregularity of the data. In this paper, we present a data-driven point cloud augmentation technique. The key idea is to learn multilevel features per point and to reconstruct to a similar point set. Our network is applied to a projection loss function that encourages the predicted points to remain on the geometric shapes with a particular target. We conduct various experiments using ShapeNet part data to evaluate our method and demonstrate its possibility. Results show that our generated points have a similar shape and are located closer to the object.

• Korean Journal of Remote Sensing
• /
• v.22 no.1
• /
• pp.41-47
• /
• 2006

Detection and identification of targets from remotely sensed imagery are of great interest for civilian and military application. This paper presents an algorithm for target detection in high spatial resolution imagery based on the spectral and the dimensional characteristics of the reference target. In this algorithm, the spectral and the dimensional information of the reference target is extracted automatically from the sample image of the reference target. Then in the entire image, the candidate target pixels are extracted based on the spectral characteristics of the reference target. Finally, groups of candidate pixels which form isolated spatial objects of similar size to that of the reference target are extracted as detected targets. The experimental test results showed that even though the algorithm detected spatial objects which has different shape as targets if the spectral and the dimensional characteristics are similar to that of the reference target, it could detect 97.5% of the targets in the image. Using hyperspectral image and utilizing the shape information are expected to increase the performance of the proposed algorithm.