• Macromolecular Research
• /
• 제17권9호
• /
• pp.651-657
• /
• 2009

This study examined the optimum compositions of binder, photo-acid generator (PAG) and sensitizer for the cationic ring opening polymerization of 1,3-bis[2-(3-{7-oxabicyclo-[4.1.0]heptyl})]-tetramethyldisiloxane in the presence of polydimethylsiloxane with four epoxide moieties as a co-monomer. When diffractive efficiency (DE) values were compared quantitatively to analyze the effect of the binder on holographic photopolymerization, DE was affected by the viscosity of the binders and miscibility with the monomer mixture. Extremely low DE values were observed when the immiscible dimethyl silicone was used as a binder. Therefore, methylphenyl silicone, which is miscible with the monomer mixture, was used as the binder for further studies. The optimal conditions were a binder viscosity between 250 to 390 cP, and contents of the binder, PAG, and sensitizer were 75-125 wt%, > 6 wt% and 0.05 wt% to the total monomer mixture, respectively.

• 한국재료학회지
• /
• 제32권4호
• /
• pp.193-199
• /
• 2022

In this study, lenses are fabricated using various nanomaterials as additives to a silicone polymer made with an optimum mixing ratio and short polymerization time. In addition, PVP is added at a ratio of 1 % to investigate the physical properties according to the degree of dispersion, and the compatibility with hydrophobic silicone and the possibility of application as a functional lens material are confirmed. The main materials are SIU as a silicone monomer, DMA, a hydrophilic copolymer, EGDMA as a crosslinking agent, and 2H2M as a photoinitiator. Holmium (III) oxide, Europium (III) oxide, aluminum oxide, and PVP are used. When Holmium (III) oxide and Europium (III) oxide are added based on the Ref sample, the characteristics of the lens tend to be similar overall, and the aluminum oxide shows a tendency slightly different from the previous two oxides. This material can be used as a silicone lens material with various nano oxides and polyvinylpyrrolidone (PVP) acting as a dispersant.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.480-507
• /
• 2003

A rapid and efficient method for analyzing the nonionic surfactants and silicone polymers, which control the shape and characteristics of cosmetic products and give influence on product quality, has been developed using Matrix-Assisted Laser Desorption Ionization Time of Flight Mass Spectrometry (MALDI- TOF IMS). The MALDI-TOF/MS could easily and effectively determine the molecular weight distribution and monomer units of nonionic surfactants. As a result, creating a library of mass spectrum data of surfactants used in cosmetic products using MALDI-TOF/MS and analyzing surfactants extracted from the products may become a useful method for detailed structural characterization of the surfactants. Furthermore, the MALDI-TOF/MS analysis was effective in obtaining the spectrum of silicone polymers from which the molecular weight distribution could be determined. The repetition units and structural data could also be obtained through molecular mass peaks. Additionally, the monomer ratio and terminal groups as properties of silicone copolymers could be determined

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.162-163
• /
• 2021

To prepare the waterborne silicone acrylic resin coatings, acrylic resin was prepared by a radical polymerization. Glass transition temperature(Tg) of the acrylic copolymer was fixed at 30℃ and the contents of tertiary amine monomer(DMAEMA), were varied to be 5, 10, 15 and 20 wt%, hydroxyl monomer, and carboxyl monomer were fixed 10 wt%, and 4 wt% respectively. γ-Glycidoxypropyltrimethoxysilane(GPTMS) containing epoxy group was used for curing agents. The eqivalent ratio of amine to epoxy was 1:1. The prepared coatings exhibited excellent adhesion to various substrates, and various physical properties of the coatings were satisfactory. The gloss retension and color difference were improved at low tertiary amine concentration. The coatings containing 10wt% tertiary amine concentration have especially good weather resistant properties.

• 한국안광학회지
• /
• 제11권2호
• /
• pp.143-149
• /
• 2006

본 연구의 목적은 콘택트렌즈의 재료로 사용되는 실리콘 고분자를 합성하여 실리콘 재질의 가스 투과성 콘택트렌즈의 함수율과 광 투과성의 문제를 해결하는 데에 있다. 실험에 사용된 monomer들로는 NVP(N-vinly-pyrrolidone), MMA(methyl methacrylate), HEMA(Hydroxyethylmethacrylate)등과 교차결합제로 EGDMA(Ethylene Glycol Dimethacrylate)를 사용하였으며, 또한 콘택트렌즈 제조의 가장 좋은 조건을 위한 많은 조합 공식을 토대로 중합한 후, 중합된 개체를 가지고 함수율 측정과 광투과율 측정을 실시하였다. 본 실험의 연구 결과 재질의 투명성과 함수율을 동시에 추구하는 고분자를 합성하였고 그들의 물성을 측정하였다.

• 대한화학회지
• /
• 제60권4호
• /
• pp.261-266
• /
• 2016

The major physical characteristics of macromolecules used in silicone hydrogel ophthalmic lenses include optical transmittance, oxygen permeability, water content, and refractive index. For the preparation of highly functional silicone hydrogel lens materials, two silicone monomers were used in the presence of 2-hydroxyethyl methacrylate (HEMA) and hydroxypropyl methacrylate (HPMA). The samples containing HEMA and HPMA had oxygen transmissibility (Dk) values in the range of 73.38–50.98 × 10^-11 (cm²/s) (mLO₂/mL×mmHg) and 71.94–42.80 × 10^-11 (cm²/s) (mLO₂/mL×mmHg), respectively. Furthermore, the water contents of samples containing HEMA and HPMA were in the range of 32.73–34.67% and 31.94–33.74%, respectively, and the refractive indices were in the range of 1.4348–1.4364 and 1.4385–1.4407, respectively. Thus, silicone monomers containing HEMA and HPMA are expected to be useful for fabricating high-oxygen-permeability silicon hydrogel ophthalmic lenses.

• 폴리머
• /
• 제25권3호
• /
• pp.406-413
• /
• 2001

고분자의 블렌드는 새로운 성질을 가지는 재료의 제조를 위한 하나의 방법으로 제시되고 있다. 그러나 대부분의 재료는 재료사이의 점탄성, 표면에너지 그리고 상호결합력의 차이로 인하여 비상용성을 지니며, 이로 인하여 블렌드물은 예상되는 물성을 나타내지 못하는 경우가 있다. 실리콘 고무는 우수한 내열성과 전기적 성질을 가지며, ethylene propylene diene monomer (EPDM) 고무는 우수한 기계적 물성을 지니고 있다. 본 실험에서는 실리콘과 EPDM 고무의 블렌드를 통한 전기적 성질과 기계적 물성이 우수한 새로운 기능성 재료의 개발에 목적을 두었다.

• 대한화학회지
• /
• 제64권6호
• /
• pp.354-359
• /
• 2020

This research was conducted to analyze the compatibility of used monomers and produce the high functional contact lens material containing silicone monomers. Silicone monomer (Sil-OH), Trimethylsilylmethacrylate (TSMA) were used as additives for the basic combination of Polyhedral Oligomeric Silsesquioxane (POSS), methyl methacrylate (MMA) and methyl acrylate (MA). And also, the materials were copolymerized with ethylene glycol dimethacrylate (EGDMA) as the cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the fabricated lenses of all combinations are optically excellent and thus used monomers have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic lens material were varied in each case. Especially TSMA with POSS increases the oxygen permeability and Sil-OH with POSS increases the wettability by the addition of Sil-OH. These materials were considered to have compatibility each other, so it can be used in functional contact lens material.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.409-413
• /
• 1999

Recently, the polymeric insulators have been accepted in several countries for the outdoor high voltage applications. In comparison with the conventional porcelain, polymeric insulators offer various advantages such as light weight, superior vandal resistance and better contamination performance. The outdoor polymeric insulating materials such as silicone rubber, ethylene propylene diene monomer(EPDM), ethylene vinyl acetate(EVA) and epoxy are aged such as silicone rubber, ethylene propylene diene monomer(EPDM), ethylene vinyl acetate(EVA) and epoxy are aged under the various natural environment with the long-term performance in outdoor. In this paper, the effects of UV-under the various natural environment with the long-term performance in outdoor. In this paper, the effects of UV-ray on the surface of silicone rubber were investigated by using the weather-Ometer. The accelerated aging stresses were simulated by UV radiation, high temperature and humidity as well as water spray. These aging characteristics were examined through contact angle measurements, tracking resistance test, FT-IR and SEM/EDS analysis. The experimental results showed that tracking resistance decreases with increase in the UV-ray irradiation period. But the surface of silicone rubber kept hydrophobicity. It is found that the inorganic filler such as)$ Al(OH_3$ improves tracking resistance and the $Tio_2$is very effective in preventing degradation of silicone rubber surface from UV-ray.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.199-204
• /
• 2009

Silicone dioxide absorbed polyoxyethylene alkylether sulfate (EU-S133D) surfactant was prepared. Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using Acrylate as a shell monomer and potassium persulfate (KPS) as an initiator. We found that when Acrylate core prepared by adding 2.0 wt% EU-S133D, silicone dioxide/Acrylate core-shell polymerization was carried out on the surface of silicone dioxide particle without forming the new silicone dioxide particle during acrylate shell polymerization in the inorganic/organic core-shell polymer preparation. The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of latex by scanning electron microscope(SEM).