• 한국표면공학회지
• /
• 제52권6호
• /
• pp.321-325
• /
• 2019

Triso-type coating layers of silicon carbide and graphite on UO₂ paticulate nuclear fuel were prepared by using fluidized bed type chemical vapor deposition and self-propagating high temperature synthesis methods to make a coated nuclear fuel of a power plant for hydrogen mass-production. The source and carrier gases were the mixture of methyltrichlorosilane and propane, and inert argon. Chemical analysis and microstructure observation showed that the coated layers were inner graphite, middle silicon carbide and outer graphite. The elastic modulus and nano-hardness of the silicon carbide layer were 503 [GPa] and 36 [GPa], respectively.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.123-124
• /
• 2007

3성분계 Ti-Si-C 코팅은 PECVD 기술에 의해 WC-Co 기판에 합성되었다. 이 연구에서 Ti-Si-C코팅에서의 비정질 silicon carbide 상의 효과는 XRD, XPS, TEM에 의해 분석되었다. TiC 결정의 입자크기는 비정질 silicon carbide의 침투 현상 때문에 Si의 함유량이 증가됨에 따라 감소된다. Ti-Si-C 코팅은 5.2%의 Si함유량에서 나노크기의 nc-TiC결정과 비정질 a-SiC로 이루어져 있고 최고 경도 33GPa와 탄성율 330GPa를 각각 보여주고 있다. 이 수치들은 순수한 TiC(-21GPa, 260Gpa)보다 눈에 띄게 높아졌다.

• Carbon letters
• /
• 제5권3호
• /
• pp.108-112
• /
• 2004

Effect of silicon infiltration on the bend and tensile strength of 2D cross-ply carbon-carbon composites are studied. It is observed that bend strength higher than tensile strength in both types of composite is due to the different mode of fracture and loading direction. After silicon infiltrations bend and tensile strength suddenly decreases of carbon-carbon composites. This is due to the fact that, after silicon infiltration, silicon in the immediate vicinity of carbon forms the strong bond between carbon and silicon by formation silicon carbide and un-reacted silicon as free silicon. Therefore, these composites consist of three components carbon, silicon carbide and silicon. Due to mismatch between these three components secondary cracks developed and these cracks propagate from $90^{\circ}$ oriented plies to $0^{\circ}$ oriented plies by damaging the fibers (i.e., in-situ fiber damages). Hence, secondary cracks and in-situ fiber damages are responsible for degradation of mechanical properties of carbon-carbon composites after silicon infiltration which is revealed by microstructure investigation study by scanning electron microscope.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.515-519
• /
• 2009

Carbon layers were fabricated on silicon carbide by chlorination reaction at temperatures between $1000^{\circ}C$ and $1500^{\circ}C$ with $Cl_2/H_2$ gas mixtures. The effect of reaction temperature on the micro-structures and tribological behavior of SiC derived carbon layer was investigated. Tribological tests were carried out ball-on-disk type wear tester. Carbon layers were characterized by X-ray diffractometer, Raman spectroscopy and surface profilometer. Both friction coefficients and wear rates were maintained low values at reaction temperature up to $1300^{\circ}C$ but increased suddenly above this temperature. Variation of surface roughness as a function of reaction temperature was dominant factor affecting tribological transition behavior of carbon layer derived from silicon carbide at high temperature.

• 한국세라믹학회지
• /
• 제32권12호
• /
• pp.1417-1423
• /
• 1995

α/β sialon based composites containing silicon nitride whisker and silicon carbide platelet were fabricated by hot pressing. Effect of the reinforcing agents on the α to β phase transformation of the sialon as well as on the mechanical properties was investigated. Silicon nitride whisker and silicon carbide platelet promoted the phse transformation. TEM/EDS analysis revealed that the grain containing the whisker had 'core-rim' structure; core being high purity Si3N4 whisker and rim being β-sialon. Flexural strength of the composite decreased with the reinforcement addition which, on the other hand, improved fracture toughness of it. High temperature strength was measured at 1300℃ to be about 130 MPa lower than that measured at RT for the whisker reinforced composites.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.429-433
• /
• 2013

Silicon, carbon, and B4C powders were used as raw materials for the fabrication of porous SiC. ${\beta}$-SiC was synthesized at $1500^{\circ}C$ in an Ar atmosphere from a silicon and carbon mixture. The synthesized powders were pressed into disk shapes and then heated at $2100^{\circ}C$. ${\beta}$-SiC particles transformed to ${\alpha}$-SiC at over $1900^{\circ}C$, and rapid grain growth of ${\alpha}$-SiC subsequently occurred and a porous structure with elongated plate-type grains was formed. The mechanism of this rapid grain growth is thought to be an evaporation-condensation reaction. The mechanical properties of the fabricated porous SiC were investigated and discussed.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.503-510
• /
• 2002

가압유동층 복합발전용으로 사용 가능한 탄화규소 캔들형 필터를 압출성형법으로 제조하였다. 필터의 기공율을 조절하기 위해 2.5 vol%의 탄소분말을 첨가하였고, 필터의 강도를 부여하기 위해 무기결합제로써 점토와 $CaCO_3$를 첨가하였다. 평균 기공율이 약 40%, 평균 기공크기가 약 $47{\mu}m$인 지지체 위에 평균 기공크기가 약 $10{\mu}m$를 갖도록 탄화규소 분말을 분무 코팅하였고, 이후 대기압 분위기 하에서 1400${\circ}C$의 온도로 소결하였다. 코팅층이 형성된 캔들형 필터를 500${\circ}C$, $5kgf/cm^2$의 고온, 고압 하에서 성능평가를 행한 결과 입자크기별 집진 성능이 모두 99.99% 이상을 나타내었다. 따라서 제조된 탄화규소 캔들형 필터는 가압유동층 연소가스에 포함되어 있는 미세한 먼지를 효과적으로 제거할 수 있을 것으로 판단되었다.

• Korean Chemical Engineering Research
• /
• 제53권4호
• /
• pp.425-430
• /
• 2015

고분자 복제방법을 이용하여 제조한 폼 형태의 다공성 탄화규소 표면에 수열 합성 방법을 적용하여 ZSM-5를 합성하였다. 다공성 탄화규소 표면으로부터 ZSM-5가 합성될 수 있도록 유도하기 위하여 합성단계에 앞서 탄화규소 표면에 산화 층을 형성하였다. 수열합성 반응은 산화처리 된 다공성 탄화규소와 TEOS, $Al(NO_3){\cdot}9H_2O$ 및 TPAOH를 원료로 사용하여 $150^{\circ}C$에서 7시간 진행하였다. XRD 및 SEM 분석을 통하여 $1{\sim}3{\mu}m$ 크기의 ZSM-5가 다공성 탄화규소 표면에 코팅되어 성장하였음을 확인하였다. BET 분석결과 ZSM-5 합성 후에 $10{\AA}$이하의 미세기공이 급격히 증가하였으며, 비표면적이 $0.83m^2/g$에서 $30.75m^2/g$으로 급격히 증가되었음을 알 수 있었다.

• 한국분말재료학회지
• /
• 제21권6호
• /
• pp.467-472
• /
• 2014

RBSC (reaction-bonded silicon carbide) represents a family of composite ceramics processed by infiltrating with molten silicon into a skeleton of SiC particles and carbon in order to fabricate a fully dense body of silicon carbide. RBSC has been commercially used and widely studied for many years, because of its advantages, such as relatively low temperature for fabrication and easier to form components with near-net-shape and high relative density, compared with other sintering methods. In this study, RBSC was fabricated with different size of SiC in the raw material. Microstructure, thermal and mechanical properties were characterized with the reaction-sintered samples in order to examine the effect of SiC size on the thermal and mechanical properties of RBSC ceramics. Especially, phase volume fraction of each component phase, such as Si, SiC, and C, was evaluated by using an image analyzer. The relationship between microstructures and physical properties was also discussed.

• 한국세라믹학회지
• /
• 제48권4호
• /
• pp.288-292
• /
• 2011

In this study, we investigated the mechanical behavior of carbon fiber reinforced silicon carbide composites by indentation stress. Relatively porous and dense fiber reinforced ceramic composites were fabricated by liquid silicon infiltration (LSI) process. Densification of fiber composite was controlled by hardening temperature of preform and consecutive LSI process. Load-displacement curves were obtained during indentation of WC sphere on the carbon fiber reinforced silicon carbide composites. The indentation damages at various loads were observed, and the elastic modulus were predicted from unloading curve of load-displacement curve.