• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.8
• /
• pp.84-93
• /
• 2010

This paper describes a method of visualization and fast estimation of parameter in continuous time signal. The parameter estimation method of this paper directly estimate the parameters on the basis of the discrete Fourier transform. Also, this paper present to efficient visualization method of dominant parameters obtained in continuous time signal. The proposed methods are applied to test functions with three dominant modes. The results show that the proposed methods are highly applicable to parameter estimation and visualization in continuous time signal.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.453-459
• /
• 2018

We have developed a high-performance signal-processing and image-rendering heterogeneous computation system for optical coherence tomography (OCT) on mobile processor. In this paper, we reveal it by demonstrating real-time OCT image processing using a Snapdragon 800 mobile processor, with the introduction of a heterogeneous image visualization architecture (HIVA) to accelerate the signal-processing and image-visualization procedures. HIVA has been designed to maximize the computational performances of a mobile processor by using a native language compiler, which targets mobile processor, to directly access mobile-processor computing resources and the open computing language (OpenCL) for heterogeneous computation. The developed mobile image processing platform requires only 25 ms to produce an OCT image from $512{\times}1024$ OCT data. This is 617 times faster than the naïve approach without HIVA, which requires more than 15 s. The developed platform can produce 40 OCT images per second, to facilitate real-time mobile OCT image visualization. We believe this study would facilitate the development of portable diagnostic image visualization with medical imaging modality, which requires computationally expensive procedures, using a mobile processor.

• Journal of Biomedical Engineering Research
• /
• v.18 no.4
• /
• pp.397-407
• /
• 1997

In this paper, we present a signal analysis environment with visual programming capability, which is called Signal Analysis and Visualization Environment( SAVE). The system allows a user to perform visually programmed analysis of signals and visualize the results. The visualization facility enables the user to compare original signals with processed ones arid also to display signals overlaid synchronously with the events extracted from the signals. The SAVE system has an extensible architecture: each signal processing algorithm is implemented as a separate building block object module, which can be freely added or removed from the SAVE system without any code modification. We describe the overall structure of the SAVE system and the building block objects, which provide the extensibility in collaboration with together. We illustrate some test runs in order to five a taste of how to use and where to use the system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.428-433
• /
• 2002

There have been many studies to visualize the vibration and noise of rotary compressor. Most of these studies assumed that the signal is stationary and the time-averaged signal is used for visualization. However, the noise and vibration signals generated during one cycle of crank shaft vary continuously. In this paper, the noise and vibration of rotary compressor which vary continuously are visualized by short time fourier transform method. The location of source and the transfer path of vibration and noise at arbitrary frequencies, which can not be visualized by averaged signal, can be visualized clearly.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.346.1-346
• /
• 2002

There have been many studies to visualize the vibration and noise of rotary compressor. Most of these studies assumed that the signal is stationary and the time-averaged signal is used for visualization. However, the noise and vibration signals generated during one cycle of crank shaft vary continuously. In this paper, the noise and vibration of rotary compressor which vary continuously are visualized by short time fourier transform method. (omitted)

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.4
• /
• pp.400-407
• /
• 2011

Modeling and analysis of high-dimensional spectral data provide an opportunity to uncover inherent patterns in various information-rich data. Orthogonal signal correction (OSC) a preprocessing technique has been widely used to remove unwanted variations of spectral data that do not contribute to prediction or classification. In the present study we propose a novel OSC algorithm called adjusted direct OSC to improve visualization and the ability of classification. Experimental results with real mass spectral data from condom lubricants demonstrate the effectiveness of the proposed approach.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.6
• /
• pp.1144-1150
• /
• 2007

In this study, a hardware-independent software scheme is proposed to visualize biomedical signals such as an electrocardiogram(ECG) and their relevant diagnostic features in a real-time mode. To minimize the dependency on a specific hardware units and to maximize software portability into the different hardware platforms, objected-oriented visualization codes are implemented by Visual C++ MFC(Microsoft Fundamental Classes) with the integration of ActiveX modules.

• Journal of the Korean Society of Visualization
• /
• v.3 no.2
• /
• pp.3-13
• /
• 2005

The optical patterantor provides the high resolution and quantitative information of the spray. Fuel distribution and Sauter Mean Diameter (SMD) can be measured from fluorescence and Mie-scat-tering images. To correct the attenuation of the laser beam and signal in dense spray region, the method to find the geometric mean of the signal intensities obtained from two cameras was evaluated and verified in a solid-cone spray. In high pressure environment, the increased number density of the droplets cause multiple scattering. The optical patternation technique using a laser beam instead of a laser sheet was applied to minimize the multiple scattering problem. The pattern of a coaxial spray was changed from hollow-cone to solid-cone shape, and the spray angle was reduced as the ambient pressure increased from 0.1 to 4.0 MPa.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.169-170
• /
• 2006

The main purpose of this study is to develop a program for sound field visualization system which gets noise signals in microphones array for incoming noise signals and it uses to operate noise signals and to store data in multi-channel FFT and is consisted to visualize noise signals with a image which is got by camera in center of array by using beamforming algorithm of the array signal processing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.1009-1009
• /
• 2003

VIPER a new tool for the VIsual PERception of sound quality and for sound design will be presented. Requirement for the visualization of sound quality is a signal analysis modeling the information processing of the ear. The first step of the signal processing implemented in VIPER, calculates an auditory spectrogram by a filter bank adapted to the time- and frequency resolution of the human ear. The second step removes redundant information by extracting time- and frequency contours from the auditory spectrogram in analogy to contours of the visual system. In a third step contours and/or auditory spectrogram can be resynthesised confirming that only aurally relevant information were extracted. The visualization of the contours in VIPER allows intuitively to grasp the important components of a signal. Contributions of parts of a signal to the overall quality can be easily auralized by editing and resynthesising the contours or the underlying auditory spectrogram. Resynthesis of time contours alone allows e.g. to auralize impulsive components separately from the tonal components. Further processing of the contours determines tonal parts in form of tracks. Audible differences between two versions of a sound can be visually inspected in VIPER through the help of auditory distance spectrograms. Applications are shown for the sound design of several interior noises of cars.