• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1694-1700
• /
• 2004

In this paper, we propose the AWLS/MFT (Adaptive Weighed Least Squares/ Modulation Function Technique) devised by A. E. Pearson et al. for the transfer function estimation of a modal system and investigate the performance of several algorithms, the Gram matrix method, a Luenberger Observer (LO), Least Squares (LS), and Recursive Least Squares (RLS), for the estimation of initial conditions. With the benefit of the Modulation Function Technique (MFT), we can separate the estimation problem into two phases: the transfer function parameters are estimated in the first phase, and the initial conditions are estimated in the second phase. The LO method produces excellent IC estimates in the noise free case, but the other three methods show better performance in the noisy case. Finally, we compared our result with the Prony based method. In the noisy case, the AWLS and one of the three methods - Gram matrix, LS, and RLS- show better performance in the output Signal to Error Ratio (SER) aspect than the Prony based method under the same simulation conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.179-181
• /
• 1987

In this paper, a self-tuning controller design is proposed by using pole-zero placement method and considering a system time delay. To got better tracking for the generalized self-tuning controller, pole placement method for the closed loop system and zero placement method for the error transfer function are Introduced. The proposed method shows better efficiency than pole placement method for minimizing tracking error. Simulation gives good results in tie reference signal tracking.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.5
• /
• pp.375-382
• /
• 2016

This paper presents the results for the performance improvement of underwater communication in a passive time reversal mirror (PTRM) using ray-based blind deconvolution (RBD). In conventional PTRM, the signal to be recovered is found from matched-filtering the received probe signal. However, the communication performance is degraded because the time-varying impulse response for each data frame is not reflected in the received probe signal. In this study, the time-variant transfer function is estimated from each received data frame using RBD, and the estimated time-variant transfer function is then used to recover the data signal using PTRM. The results from the experimental data show that the suggested method improves the communication performance when comparing with the conventional PTRM.

• Journal of Biosystems Engineering
• /
• v.16 no.2
• /
• pp.111-117
• /
• 1991

An empirical model for diesel engine control was obtained using a system identification method. A pseudo-random binary sequence was used as an input signal. Spectral anaylsis was used to find the frequency response of system. Model parameters of transfer functions were obtained using nonlinear regression.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.105-110
• /
• 2000

Biosensors consist principally of two basic components, receptor and transducer. The transducer part of the sensor serves the signal transfer from the output domain of the recognition system. Optical method of transducer have many benefits, based on phenomena like emission and absorption. This paper will review the methode of optical transduction in brief and out some new development.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.271-271
• /
• 2019

Estimating ship motion is difficult because it take place in complex environments.. Estimating ship motion is an important factor in ensuring the safety of ship, so accurate estimates are needed. Existing motion-related studies compare the apparent motion of the model acquired and the reference model by experimenting with the ship motion on a particular alignment, making it difficult to intuitively estimate the hull motion. This study introduces the concept of estimating the characteristics of ship motion as a transfer function through pole-zero interpretation and frequency response analysis by applying the method of transfer function of Linear-Time Invariant system. Ship motion analysis model using Linear-Time Invariant system is consist with 1) wave as input signal 2) ship motion as output signal 3) hull defined as black box. This model can be defined by numericalizing the ship motion as a transfer function and is expected to facilitate the characterization of the ship motion through pole-zero analysis and frequency response analysis.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.8
• /
• pp.741-746
• /
• 2007

In this study, transfer path identification and output estimation are simulated by multi-dimension spectral analysis method (MDSA). Multi -input/single-output system give expression the vehicle suspension which each inputs are correlated reciprocally. In case of correlating with inputs, the system needs separating the each input signal by MDSA. Main simulations are about finding effective input by coherent output spectrum and selecting optimal input's number by multiple coherence function. Also, by shielding transfer path of each input, transfer path characteristic is identified in terms of overall integrated contribution level.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.98-106
• /
• 2009

This paper proposes an optical wireless transfer agent method which realizes the continuous and swift data transfer of optical wireless terminals in optical wireless networks. The unguided wireless channel generally shows frequent link disconnections and propagation delays due to weak wireless links. Specially speaking, optical wireless channels have more vulnerable links and roaming propagation delays relative to the weakness of the previous RF channels due to their low signal connectivity and small geographic coverage. Conventional optical wireless network protocols did not consider any fault models about physical link faults. Consequently, they have shown data transfer inefficiency for both data link control and physical wireless link control. To overcome these optical wireless environmental problems, this paper suggests a new wireless access point (or base station) agent system, which provides wireless or mobile clients with previous link layer protocols compensated.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3E
• /
• pp.24-31
• /
• 1997

A mobile propagation characteristics for wideband DS-SS (Direct Sequence-Spectrum) signal is presented. Existing narrowband model is extended for the wideband pulse with an arbitrary shape. The received DS-SS signal in the frequency domain is the transfer function of the propagation channel weighted by the inverse Fourier transform. In this proposed method, received signal spectral density, instantaneous waveform, and Doppler spectrum of DS-SS signal via either Rayleigh of Rician channel can be obtained easily. Simulation results match well with both simulated theoretical fading statistics and classical theory. As expected, the extraction of chip timing in Rician fading shown to be more tractable than Rayleigh fading.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.635-639
• /
• 2003

When we carry out acoustic holography, step-by-step measurement provides us larger aperture size with same number of microphones. But when we carry out step-by-step measurement, it is blown that sound signal must be stationary. However, when transfer function between input and output signal is time-invariant, we can apply step-by-step measurement to acoustic holography even if sound signal is transient We have to do only some Processing on signals from step-by-step measurements to make the signal data of each step compatiable with other steps. This paper accounts for that processing method.