• Journal of radiological science and technology
• /
• v.38 no.3
• /
• pp.213-220
• /
• 2015

This research was study the accuracy of three-dimensional stereotactic breast biopsy, using a core Needle Biopsy and to assess the accuracy of Stereotactic biopsy and Sono guided biopsy. Using Stereotactic QC phantom to measure the accuracy of the 3D sterotactic machine. CT Scan and equipment obtained in the measured X, Y, Z and compares the accuracy of the length. Using Agar power phantom compare the accuracy of the 3D sterotactic machine and 2D ultrasound machine. Z axis measured by the equipment to compare the accuracy and reliability. Check the accuracy by using visual inspection and Specimen Medical application phantom. The accuracy of the 3D sterotactic machine measured by Stereotactic QC phantom was 100%. Accuracy as compared to CT, all of X, Y, Z axis is p > 0.05. The accuracy of the two devices was 100% as measured by Agar powder phantom. There was no difference between t he t wo d evices as C T and p > 0.05. 3D sterotactic machine of the ICC was 0.954, 2D ultrasound machine was 0.785. 2D ultrasound machine was different according to the inspector. Medical application phantom experiments in 3D sterotactic machine could not find the Sliced boneless ham. 2D ultrasound machine has not been able to find a small chalk powder group. The reproducibility of the three-dimensional stereotactic breast biopsy was better than effect of Sono guided biopsy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.317-325
• /
• 2016

This paper describes the technique for Radar Particle filter for TBD(Track Before Detect) processing. TBD technique is applied when target is difficult to detect due to low signal-to-noise ratio caused by strong clutter environments, small RCS targets and stealth targets. Particle filter is suitable for a recursive TBD algorithm and has improved estimation accuracy than Kalman filter. In this paper, we will present a new method of calculating particle weight, when observation values(including strong clutter) are received at the same time. Estimation error performance of the particle filter algorithm is analyzed by using the virtual radar observation scenario.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.24-29
• /
• 2010

Selection-type relaying protocol, which is one of cooperative relaying protocols, provides low decoding complexity and improved system performance due to selection diversity. In this paper, we deal with linear precoding technique that minimize the error probability of cooperative MIMO system. Under the assumption that full channel state information is available at whole nodes, linear source and relay precoders, which minimize mean squared error of the estimated symbol vector, are proposed. Moreover, unlikely to the conventional selection-type relaying protocol using a fixed threshold signal-to-noise-ratio, new transmission link selection algorithm selects direct link or relay link as a transmission link, is introduced. Simulation results show that the proposed linear precoder with the transmission link selection algorithm outperforms the conventional precoders for two-hop relaying protocols or selection-type relaying protocols.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.109-114
• /
• 2015

Frame synchronization is achieved by correlation between received symbols and a preamble pattern which is periodically appended at a frame header. In this paper, we deal with a frame detection method complaint with satellite-based DVB-S2 system. In DVB-S2, frame synchronization is performed under the low signal-to-noise ratio(SNR), a large frequency offset which can be up to 20% of a symbol transmission rate and unknown modulation schemes ranging from QPSK to 32-APSK. In this environment, we propose a method combining differential correlation based on SOF and PLSC with an accumulated correlation method for the detection of frame structures. In addition, detection performances about mean acquisition time(MAT) and detection error probability are evaluated via computer simulations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.11
• /
• pp.12-20
• /
• 2002

Serially concatenated multilevel coded modulation (SCMCM) is proposed in this paper. It is a combined scheme of the outer convolutional code and inner multilevel coded modulation (MCM) which is bandwidth-efficient coded modulation. And the performance of three schemes for decoding of the proposed SCMCM is compared and analyzed. As results of simulations, global iterative decoding with inner and outer code should be performed to improve the error performance as the number of iterations is increased. And the scheme which uses both local iterative multistage decoding in MCM and global iterative decoding with inner and outer code, called Scheme 3 in this paper, shows the best error performance among the three schemes considered in this paper. In addition, performance difference between this scheme and the others is increased as the signal to noise ratio (SNR) is increased. Therefore, Scheme 3 is considered to be the proper decoding scheme of SCMCM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8C
• /
• pp.767-774
• /
• 2007

A new transmit antenna selection and shuffling($AS^2$) method for spatially correlated double space time transmit diversity(DSTTD) systems is proposed. The proposed method allows dumb antennas and the superposition of multiple signals at the same transmit antenna, whereas the conventional methods consider the antenna shuffling(AS) only. According to the simulation result, the proposed method provides a 1.8 dB signal-to-noise ratio(SNR) gain over the conventional methods for spatially correlated transmit antennas. Although the number of candidates for $AS^2$ is much higher than that of AS, it is found that the number of candidates for $AS^2$ can be reduced to 36 by using the characteristics and properties of preprocessing matrices, and among them, only 6 candidates are almost always chosen. Next, we empirically compare the bit-error-rate (BER) performance of the proposed method with the conventional spatial multiplexing(SM) technique with antenna selection. Simulation results show that the proposed method outperforms the SM technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2A
• /
• pp.99-108
• /
• 2002

In this paper, we discuss the effect of imperfect knowledge of the transmission channel on the M-QAM SER performance of space-time block codes. Because the channel knowledge is used for decoding of space-time block codes, the imperfect channel knowledge can degrade the performance of space-time block codes. In this paper, the channel mismatch error is modeled as errors in the estimation of the channel due to noise and errors due to the variation of the channel. We derive the analytic expression for the symbol error rate (SER) as a function of the average signal to interference ratio (SIR) per channel including the terms of channel mismatch errors. Simulation results show that the acceptable levels of channel estimation error is 10$\^$-3/ and that of channel variation is f$\_$d/T$\_$B/=0.001 at SNR=20dB in space-time block codes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.34-42
• /
• 2005

In orthogonal frequency-division multiple access (OFDMA) uplink environments, asynchronously received signals can cause multiple access interference (MAI). This paper focuses on the performance degradation due to the MAI over frequency-selective fading channels. We first introduce the timing misalignment, which is defined as the relative timing difference between asynchronous timing error of uplink user and reference time of the base station, and analytically derive the MAI using the power delay profile of wide-sense stationary uncorrelated scattering (WSSUS) channel model. Then, the effective signal-to-noise ratio (SNR) and the average symbol error probability (SEP) are derived. The proposed analytical results are verified through simulations with respect to the region of the timing misalignment and the number of asynchronous users.

• Investigative Magnetic Resonance Imaging
• /
• v.12 no.2
• /
• pp.100-106
• /
• 2008

The purpose of this study was to confirm the exactitude of in vitro nuclear magnetic resonance spectroscopy(NMRS) and to complement the defect of in vivo NMRS. It has been difficult to understand the metabolism of a cerebellum using in vivo NMRS owing to the generated inhomogeneity of magnetic fields (B0 and B1 field) by the complexity of the cerebellum structure. Thus, this study tried to more exactly analyze the metabolism of a canine cerebellum using the cell extraction and high resolution NMRS. In order to conduct the absolute metabolic quantification in a canine cerebellum, the spectrum of our phantom included in various brain metabolites (i.e., NAA, Cr, Cho, Ins, Lac, GABA, Glu, Gln, Tau and Ala) was obtained. The canine cerebellum tissue was extracted using the methanol-chloroform water extraction (M/C extraction) and one group was filtered and the other group was not under extract processing. Finally, NMRS of a phantom solution and two extract solution (90% D2O) was progressed using a 500MHz (11.4 T) NMR machine. Filtering a solution of the tissue extract increased the signal to noise ratio (SNR). The metabolic concentrations of a canine cerebellum were more close to rat’s metabolic concentration than human’s metabolic concentration. The present study demonstrates the absolute quantification technique in vitro high resolution NMRS with tissue extraction as the method to accurately measure metabolite concentration.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.891-897
• /
• 2021

With the development of Amyloid PET Tracer, the accuracy of Alzheimer's diagnosis can be improved through the identification of beta-amyloid neurites. However, the long image acquisition time of 20 minutes can be difficult for the patient. PET/CT scans are sensitive to patient movement and may partially affect test results. In this study, we studied the proper image acquisition time without affecting the quantitative evaluation of the image through the list mode acquisition method according to the time of the distribution of radioactive drugs in the body. The list mode includes information about time compared to the existing frame mode, and it is easy to analyze data because it can reconstruct images about the time that researchers want. The research method obtained a reconstructed image by time using a list mode of 5min frame/bed, 10min frame/bed, 15min frame/bed, and 20min frame/bed to compare the difference between signal-to-pons take ratio (SNR) and lesion-to-pons uptake ratio (LPR) and the difference in reading time to obtain an appropriate image. As a result of quantitative analysis, when measuring in list mode, SUVmean values decreased in 6 regions of interest as the image acquisition time increased, but showed the largest difference in 5 min/bed images, followed by 10 min/bed and 15 min/bed. As a result, the difference in SUVmean values decreased. Therefore, it was found that SUVmean values at 15 min/bed did not differ enough to not affect image evaluation. There was no difference in LPR values. As a result of the qualitative analysis, there was no change in the reading findings according to the PET image acquisition time and there was no significant difference in the qualitative analysis score of the image reconstruction according to time. As a result of the study, there is no significant difference between 15 min/bed and 20 min/bed images during the ¹⁸F-flutemetamol PET/CT test, so it can be said that it is clinically useful to reduce the image acquisition time selectively using 15 min/bed via list mode depending on the patient's condition.