• 센서학회지
• /
• 제26권5호
• /
• pp.331-337
• /
• 2017

A readout circuit for a tactile sensor pad based on force sensing resistors was proposed, which was composed of an analog signal conditioning circuit and a digital circuit with a microcontroller. The conventional signal conditioning circuit has a dc offset voltage in the output signal, which results from the reference voltage applied to the FSR devices. The offset voltage reduces the dynamic range of the circuit and makes it difficult to operate the circuit under a low voltage power supply. In the proposed signal conditioning circuit, the dc offset voltage was removed completely. The microcontroller with A/D converter and D/A converter was used to enlarge the measurement range of pressure. For this, the microcontroller adjusts the FSR reference voltage according to the resistance magnitude of FSR under pressure. The operation of the proposed readout circuit which was connected to a tactile sensor pad with $5{\times}10$ FSR array was verified experimentally. The experimental results show the proposed readout circuit has the wider measurement range of pressure than the conventional circuit. The proposed circuit is suitable for low voltage and low power applications.

• 센서학회지
• /
• 제32권2호
• /
• pp.105-109
• /
• 2023

In this study, we present a power-efficient driving method for gas sensor systems based on the analysis of input signal characteristics. The analysis of the gas sensor output signal characteristics in the frequency domain shows that most of the signal portions are distributed in a relatively low frequency region when extracting the gas sensor signal, which can lead to further performance improvement of the gas sensor system. Therefore, the proposed gas signal extracting technique changes the operating frequency of the read-out circuit based on the frequency characteristics of the output signal of the gas sensor, resulting in a reduction of power consumption at the whole system level. The proposed sensing technique, which can be applied to a general-purpose commercial gas sensor system, was implemented in a printed circuit board (PCB) to verify its effectiveness at the commercial level.

• 한국정보전자통신기술학회논문지
• /
• 제14권6호
• /
• pp.479-486
• /
• 2021

본 논문에서는 신호감지회로(Signal Sensing Circuit : SSC)를 추가하여 2개의 루프로 구성된 단일 커패시터 루프필터를 가진 극소형 위상고정루프(Phase Locked Loop : PLL)를 제안하였다. 위상고정루프 크기를 극단적으로 줄이기 위하여 가장 많은 면적을 차지하는 수동소자 루프필터를 극소형 단일 커패시터(2pF)로 설계하였다. 신호감지회로가 포함된 내부 부궤환 루프 출력이 외부 부궤환 루프의 단일 커패시터 루프필터 출력에 부궤환 역할을 하여 제안한 극소형 위상고정루프가 안정적으로 동작하도록 설계하였다. 위상고정루프 출력 신호 변화를 감지하는 신호 감지 회로는 루프필터의 커패시턴스 전하량을 조절하여 위상고정루프 출력 주파수의 초과 위상변이를 줄였다. 제안된 구조는 기존 구조에 비해 1/78 정도의 작은 커패시터를 가짐에도 불구하고 지터 크기는 10% 정도 차이가 난다. 본 논문의 위상고정루프는 1.8V 180nm 공정을 사용하였고, Spice를 통해 안정하게 동작하는 시뮬레이션 결과를 보여주었다.

• Journal of Magnetics
• /
• 제12권1호
• /
• pp.35-39
• /
• 2007

A highly sensitive magnetic sensor using the Giant MagnetoImpedance effect has been developed. The sensor performance is studied and estimated. The sensor circuitry consists of a square wave generator (driving source), a sensing element in a form of composite wire of a 25 $\mu$m copper core electrodeposited with a thin layer of soft magnetic material ($Ni_{80}Fe_{20}$), and two amplifier stages for improving the gain, switching mechanism, scaler circuit, an AC power source driving the permeability of the magnetic coating layer of the sensing element into a dynamic state, and a signal pickup LC circuit formed by a pickup coil and an capacitor. Experimental studies on sensor have been carried out to investigate the key parameters in relation to the sensor sensitivity and resolution. The results showed that for high sensitivity and resolution, the frequency and magnitude of the ac driving current through the sensing element each has an optimum value, the resonance frequency of the signal pickup LC circuit should be equal to or twice as the driving frequency on the sensing element, and the anisotropy of the magnetic coating layer of the sensing wire element should be longitudinal.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.838-841
• /
• 2012

본 논문에서는 온도변화에 따른 회로 손상이나 성능 저하를 피하기 위해서 회로 안에 내장할 수 있는 온도 센서 회로를 설계하였다. 일반적인 PTAT회로를 사용하여 온도감지를 하고, 스위치를 내장시켜 회로 동작이 불가능할 정도로 IC 내부 온도가 높을 때는 절전모드로 동작하게 하였다. 또한, 전류미러 및 캐스코드회로를 사용함으로서 전류 정합특성을 향상시켰다. 시뮬레이션 결과 $75^{\circ}C$일 경우 약 1V, $130^{\circ}C$일 경우 1.75V를 출력전압을 발생하였으며, 절전모드의 경우 0V~7uV까지 즉 거의 0V에 가까운 출력전압을 발생함을 확인 할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.455-460
• /
• 2007

A self-sensing circuit for piezo inkjet has been designed in order to monitor the operating condition during printing. In order to verify the circuit, both ink droplet images from strobe LED and vibration signals from the laser vibrometer were measured and compared with self-sensing signal. Experimental results show that self-sensing signal was effective in detecting the pressure wave change due to the bubble trapped in inkjet printhead.

• 전기학회논문지
• /
• 제64권11호
• /
• pp.1564-1570
• /
• 2015

This paper intends to suggest a sensing circuit of PWM voltage for a motor emulator operated in the inverter. In the emulation of the motor using a power converter, it is necessary to measure instantaneous voltage at the PWM voltage loaded from the inverter. Using a filter can generate instantaneous voltage, while it is difficult to follow the rapidly changing inverter voltage caused by the propagation delay and signal attenuation. The method of measuring the duty of PWM using FPGA can generate output voltage from the one-cycle delay of PWM, while the cost of hardware is increasing in order to acquire high precision. This paper suggests a PWM voltage sensing circuit using the analogue system that shows high precision, one-cycle delay of PWM and low-cost hardware. The PWM voltage sensing circuit works in the process of integrating input voltage for valid time by comparing levels of three-phase PWM input voltage, and produce the output value integrated at zero vector. As a result of PSIM simulation and the experiment with the produced hardware, it was verified that the suggested circuit in this paper is valid.

• Journal of Power Electronics
• /
• 제9권6호
• /
• pp.903-910
• /
• 2009

In this paper, a digital average current mode control using diode current sensing technique is proposed. Although the conventional inductor current sensing technique is widely used, the sensed signal of the current is negative. As a result, it requires an additional circuit to be applied to general digital controller ICs. The proposed diode current sensing method not only minimizes the peripheral circuit around the digital IC but also consumes less power to sense current information than the inductor current sensing method. The feasibility of the proposed technique is verified by experiments using a 500W power factor correction (PFC) boost rectifier.

• 한국전자파학회논문지
• /
• 제26권3호
• /
• pp.305-310
• /
• 2015

본 논문에서는 RF단에서의 프로세싱에 의한 무선 스펙트럼 인지 시스템을 제안하였다. 기존의 Cognitive Radio 시스템이 신호의 하향 변환과 복조의 과정을 거쳐 수신된 신호를 분석함에 의해 스펙트럼과 신호를 인지하는데 반해, 제안된 시스템은 RF 단 프로세싱에 의한 신호 수신 및 검출에 의한 센싱 방법을 제안하였다. 이를 위해 제안된 수신기는 초재생(super-regeneration) 회로 방식으로 설계되었으며, FDM에 활용할 수 있는 채널 선택성과 채널 가변성을 갖도록 하여 기존 초재생 회로가 단일 채널로만 사용이 가능하였던 한계를 극복하였다. 제작된 제안 시스템은 퀸칭(quenching) 신호를 이용한 채널 할당 최적화를 위한 설계를 수행하였으며, 실험결과 5 MHz의 채널 간격에 대한 채널 선택성을 검증하였다.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.194-199
• /
• 2012

This paper proposes a novel scheme of a gray scale fingerprint image for a high-accuracy capacitive sensor chip. The conventional grayscale image scheme uses a digital-to-analog converter (DAC) of a large-scale layout or charge-pump circuit with high power consumption and complexity by a global clock signal. A modified capacitive detection circuit for the charge sharing scheme is proposed, which uses a down literal circuit (DLC) with a floating-gate metal-oxide semiconductor transistor (FGMOS) based on a neuron model. The detection circuit is designed and simulated in a 3.3 V, 0.35 ${\mu}m$ standard CMOS process. Because the proposed circuit does not need a comparator and peripheral circuits, the pixel layout size can be reduced and the image resolution can be improved.