• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.2
• /
• pp.106-111
• /
• 2011

In this paper, assumed mode method on Euler beam theory is employed and signal distortion is considered to obtain the performances of a MEMS accelerometer which are a sensitivity and measurable frequency range(MFR). Not only the sensitivities and MFR but also the variations of dynamic responses and natural frequencies of the MEMS accelerometer are investigated for several sets of beam properties such as length, width, thickness and Young's modulus. It is stated that the variations of beam properties significantly influence the performances of the MEMS accelerometer and the relationship between sensitivities and MFR is inversely proportional to each other.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.817-822
• /
• 1992

Distortion analysis of digital filters for the ECG signal processing is presented. Several band pass and band reject filters are designed for the analysis. Computer simulations are performed to compare the distortions of the Butterworth type filters and linear phase optimal fitters. The designed filters are applied to power line interference cancelling in ECG signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10A
• /
• pp.935-942
• /
• 2006

The performance of ROF systems can be severely degraded due to nonlinear effects in the channel. Also, Orthogonal Frequency Division Multiplex(OFDM), as a standard for broadband wireless and mobile internet networks, is being proposed for deployment with ROF systems to facilitate the total performance of a system. In this paper, at first, the performance of the OFDM-based RoF system with a Mach-Zehnder(MZ) modulator distortion effects has been analyzed at 5.8GHz. Evaluation of mean-squared error of the proposed OFDM-RoF system was carried out to compare with the conventional single carrier system based RoF link after the modulator distortion case and also for fixed signal to noise ratio(SNR) of 20dB using undistorted OFDM signal. Nominal and offset baising pre-distortion techniques are applied in proposed system to linearize the OFDM-RoF link. Finally, a comparison between the aforementioned pre-distortion techniques applied showed important observation in terms of distortion-free dynamic range and SNR to choose offset pre-distortion technique for our proposed system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.399-402
• /
• 1996

The electrodynamic loudspeakers should have a wide dynamic range to reproduce various sound levels. When the input signal is small, the radiated sound from the loudspeaker is not so much distorted. However, for large input signal with low frequency component the radiated sound is significantly distorted due to the nonlinearities of the loudspeaker. The suspension, damping, and magnetic flux of loudspeaker are the main sources of the nonlinearity. Such electromechanical parameters related to harmonic distortion have been represented by a polynomial model for diaphragm displacement, while each of the polynomial coefficient is evaluated by using the principle of harmonic balance experimentally. Based on the polynomial model, we designed a compensator for nonlinear harmonic distortion of direct radiator loudspeaker. Than observer is used to estimate the displacement of the loudspeaker diaphragm, which is rather difficult to measure directly in the conventional setting. The usefulness of the designed compensator is demonstrated by numerical simulations. Simulation results show about 30db decrease at the second and third higher harmonic distortions. We carry out an experiment on speaker to verify designed controller and nonlinear observer.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1053-1056
• /
• 2003

A distortion suppression technology for employing multiple inputs in 3n+1 type current mode Max circuit is proposed using the adjustment of transconductance. If the number of inputs in current mode Max circuit increases, the high frequency distortion in the output signal grows. In this paper, it has been disclosed that the distortion in the multiple input Max circuit is proportional to sum of parasitic capacitance in input terminals, to the derivative of the output signal and also to the inverse of transconductance of the common diode-connected transistor. The proposed idea is by employing as larger transconductance of the common diode-connected transistor as possible. The effectiveness of the proposed idea has been proved through the HSPICE simulation.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.4
• /
• pp.197-202
• /
• 2013

Large gains in speech intelligibility can be obtained using the SNR-based binary mask approach. This approach retains the time-frequency (T-F) units of the mixture signal, where the target signal is stronger than the interference noise (masker) (e.g., SNR > 0 dB), and removes the T-F units, where the interfering noise is dominant. This paper introduces two alternative binary masks based on the distortion constraints to improve the speech intelligibility. The distortion constraints are induced by a gain function for estimating the short-time spectral amplitude. One binary mask is designed to retain the speech underestimated (T-F) units while removing the speech overestimated (T-F)units. The other binary mask is designed to retain the noise overestimated (T-F) units while removing noise underestimated (T-F) units. Listening tests with oracle binary masks were conducted to assess the potential of the two binary masks in improving the intelligibility. The results suggested that the two binary masks based on distortion constraints can provide large gains in intelligibility when applied to noise-corrupted speech.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.88-93
• /
• 2013

The wideband chirp signal generator to enhance the resolution of synthetic aperture radar of obtaining the earth observation image is needed. This paper deals with designing, manufacturing and testing the wideband digital chirp signal generator having high resolution for LEO earth observation satellite. The wideband digital chirp signal generator is implemented with the memory-map based structure which is mostly applied in the satellite, and consists of the digital module to generate the digital chirp signal and the RF module to perform the quadrature modulation. The I/Q signals stored in the memory of the digital module are D/A converted and delivered to be quadrature modulated with the reference signal of 1275 MHz in the RF module. Furthermore, the test bench and GUI to validate the signal generator function are also developed. It is found that the requirement of 144 MHz bandwidth for the digital chirp signal generator is well met. Finally it is noteworthy that the distortion occurred in the chirp signal generator was compensated by the pre-distortion compensation.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4
• /
• pp.303-308
• /
• 2004

In this Paper a transmitter system for IMr-2000 using feed-forward linearization method was Proposed to linearize power amplifier. The feed-forward structure needs a reference signal to compare and neutralize distortion : this is achieved through the second modulator which is operated at very low input level to obtain a signal with a negligible distortion. Therefore, this structure can reduce distortion of modulator as well as Power amplifier. This is the advantage over the existing system structure. The Proposed transmitter system is designed and simulated by Agilent ADS ver.2002. A two tone test for the system is done at 1.98GHz center frequency with frequency spacing of 2MHz. The reduction of Inter-Modulation Distortion(IMD) is around 49.95dB. This proposed system offers an excellent combination of linearity and simplicity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.625-630
• /
• 2009

In this paper, we introduce the analysis and counter-measure of signal distortion of search radar equipped on the ship. Using ShipEDF program, the search radar's main antenna and ship structures are modeled in the view of electromagnetism. Ray tracing method is used for analysis of the search radar's radiation patterns in free space and ship condition. From analyzed radiation patterns, we can conclude that the search radar's signal distortion is due to radiation pattern distortion. We also analyze the surface current distribution of the mast to propose the counter-measure to reduce electro-magnetic field reflection of mast.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1325-1331
• /
• 1996

In this paper, a new current-memory circuit is proposed that reduces the clock feedthrough(CFT) error voltage causing total harmonic distortion(THD) increment in switched-current(SI) systems. Using PMOS transistor in CMOS complementary, the proposed one reduces output distortion current due to the CFT errorvoltage. A proposed current-memory is designed using a 1.2.mu.m CMOS process anda 1MHz sinusoidal signal having a 68.mu.A amplitude current is applied as input (sampling frequency:20MHz). It hasbeen shown from the simulation that the output distortion current effected by the CFT error voltage is reduced by approximately 10 times the error voltage of conventional one, THD is -57dB in case ofappling 1kHz frequency input signalwith 0.5 peak signal-to-bias current ratio.