• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.166-173
• /
• 2004

Satellite communication system uses a high non-linear HPA(high power amplifiers) in the earth station and satellite transponder. Therefore, it is important to consider the nonlinear effect of HPA on the communication system. In this paper, we find the variation of power spectrum density by nonlinearity HPA and the change of harmonic component according to IBO (input back-off). When the BPSK is used for satellite communication system, we analyze BER performance including the external co-channel interference (CCI) and the adjacent channel interference (ACI) resulting from the HPA nonlinearity. BER degrades as ACI magnitude grows up when the uplink SNR, uplink SIR (signal to co-channel interference power ratio) and downlink SIR are constant at some level. In case there is only non-linear HPA in the satellite, it is shown that BER considerably depends on the ACI magnitude ACI. When there are two non-linear HPAs in the both earth station and satellite, much BER degradation results from the CCI and ACI.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4570-4575
• /
• 2023

Noise and Radio-frequency interference or RFI causes a significant restriction on the Free induction Decay or FID signal detection of the Nuclear Quadrupole Resonance procedure. Therefore, using this method in non-isolated environments such as industry and ports requires extraordinary measures. For this purpose, noise reduction algorithms and increasing signal-to-noise-and-interference ratio or SNIR have been used. In this research, sodium nitrite has been used as a sample and algorithms have been tested in a non-isolated environment. The resonant frequencies for the 150 g of test sample were measured at 303 K at about 1 MHz and 3.4 MHz. The main novelty in this study was, (1) using two types of antennas in the receiver to improve adaptive noise and interference cancellation, (2) using a separate helical antenna in the transmitter to eliminate the duplexer, (3) estimating the noise before sending the pulse to calculate the weighting factors and reduce the noise by adaptive noise cancellation, (3) reject the interference by blanking algorithm, (4) pulse integration in the frequency domain to increase the SNR, and (5) increasing the detection speed by new pulse integration technique. By interference rejection and noise cancellation, the SNIR is improved to 9.24 dB at 1 MHz and to 7.28 dB at 3.4 MHz, and by pulse integration 44.8 dB FID signal amplification is achieved, and the FID signals are detected at 1.057 MHz and 3.402 MHz at room temperature.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.3
• /
• pp.30-36
• /
• 1975

Distortions are analyzed and compared for two TDM channel expansion methods- periodic sample skipping and sampling frequency reduction. Signal is assumed to be stationary random signal with zero.mean. Channel noise and interference are not considered in the analysis. For speech signal, it is shown that the periodic sample skipping method could be a better choice under practical design constraints.

• 전기의세계
• /
• v.31 no.6
• /
• pp.450-456
• /
• 1982

This paper proposes a new method for eliminating periodic interference corrupting a signal. The method proposed herein uses a variable notch filter by sampling frequency control to eliminate the interference. This method is applicable when an auxiliary reference input is available containing the interference alone. The sampling frequency is determined by the fundamental frequency of the periodic interference. Also, this paper proposes a design procedure so that it can be easily applied.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.185-185
• /
• 2000

This paper designs an interference mitigation filter for GPS receiver using a time-domain signal processing techniques (Adaptive Transversal filter). ATF is designed using verilog and simulated using COSSAP for evaluating its performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2013

The interference among the rain radars and interference in the adjacent wireless station due to the spurious signals from the rain radar were analyzed in this paper. The rain radar measures the rain intensity using S-band signal. The measured data are utilized in forecasting the rainfall. The interference among the rain radars or in the adjacent wireless stations may be caused by the operation with low elevation angle and the high output power. Based on the propagation analysis of S band signal and the deduced interference protection ratio of rain radar, the interference due to the rain radar are analyzed. Also, the radiation spectrum characteristics of a rain radar are deduced from the caused interference effects by the spurious signals of the rain radar. To minimize the interference effects for adjacent wireless stations, it is required to get the rejection characteristics of spurious signals above 105 dB. In viewpoints of interference for rain radars, it is necessary to operate the rain radar with a different PRF and operation time opposite to adjacent rain radars.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.275-284
• /
• 2014

This paper considers two-tier networks consisting of macrocells and femtocells operating in the same spectrum. This paper proposes a femtocell spectrum reuse scheme that determines the shared spectrum and transmit power for the femtocells to mitigate the effects of cross-tier interference between the macrocells and femtocells. The proposed scheme provides macrocell throughput that is unaffected by the increasing number of femtocells per cell site and improves the femtocell signal quality at the same time by limiting the cross-tier interference. This study analyzed the per-tier signal-to-interference ratio (SIR) and outage probability of the proposed scheme to investigate the macrocell and femtocell performance. The total throughput of the proposed scheme was analyzed based on the outage probabilities. The analysis and numerical results proved that high femtocell throughput can be achieved using only a small fraction of the spectrum while protecting the macrocell throughput. As a result, an improved total throughput was achieved enforcing higher spatial reuse.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.357-360
• /
• 1998

DS/CDMA system rejected narrow-band interference and additional White Gaussian noise which are occured at multipath, intentional jammer and multiuser to share same bandwidth in mobile communication systems. Because of having not sufficiently obtained processing gain which is related to system performance, they were not effectively suppressed. In this paper, an matched filter channel model using backpropagation neural network based on complex multilayer perceptron is presented for suppressing interference of narrow-band of direct sequence spread spectrum receiver in DS/CDMA mobile communication systems. Recursive least square backpropagation algorithm with backpropagation error is used for fast convergence and better performance in matched filter receiver scheme. According to signal noise ratio and transmission power ratio, computer simulation results show that bit error ratio of matched filter using backpropagation neural network improved than that of RAKE receiver of direct sequence spread spectrum considering of con-channel and narrow-band interference.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1038-1044
• /
• 2010

Interference may severely deteriorate performance in wireless communication. Han-Kobayashi scheme splits each user's signal into private and common information so that the receiver removes the other's common signal for partial interference cancellation. This paper proposes an optimal power allocation to private and common signals for Han-Kobayashi scheme by using required SNR in a private information only system. Numerical results show that the proposed power allocation is quite close to the optimal power allocation based on exhaustive searches.

• The Journal of Engineering Geology
• /
• v.5 no.1
• /
• pp.95-103
• /
• 1995

This paper concerns the use of derivative null constraint in an adaptive array pmcessor in the spatial and frequency domains with respect to a composite array processor to obtain a modified composite array processor. It is assumed that the frequency of interference signals is the same as that of a desired signal, interference directions are different from the desired signal, and interference directions and frequencies are known. Simulation results demonstrate that a higher-order derivative null broadens the null width which is appropriate for eleminating a broadband interference and a zero-order derivative null (i.e., a simple point null) with respect to frequency reduces the residual error inherent in the composite array precessor.