• 한국철도학회논문집
• /
• 제6권2호
• /
• pp.81-86
• /
• 2003

This study proposes the neural network simulator for the integrity evaluation of weld zone in railway rails. For these purposes, the ultrasonic signals for defects(crack) of weld zone in frames are acquired in the type of time series data and echo strength. The detection of the natural defects in railway truck is performed using the characteristics of echodynamic pattern in ultrasonic signal. And then their applications evaluated feature extraction based on the time-frequency-attractor domain(peak to peak, rise time, rise slope, fall time, fall slope, pulse duration, power spectrum, and bandwidth) and attractor characteristics (fractal dimension and attractor quadrant) etc. The constructed neural network simulator agrees fairly well with the measured results of test block(defect location, beam propagation distance, echo strength, etc). The Proposed neural network simulator in this study can be used for the integrity evaluation of weld zone in railway rails.

• 한국전자파학회논문지
• /
• 제21권7호
• /
• pp.786-795
• /
• 2010

본 논문에서는 EBG(Electromagnetic Band Gap) 구조에 존재하는 두 단위 셀을 신호 전달 평면상의 브릿지 라인으로 연결하는 새로운 형태의 EBG 구조를 제안하였다. 이와 같은 구조를 갖는 EBG는 단위 셀을 연결하는 비아 홀과 브릿지 라인으로 인해 전원면에서 SSN(Simultaneous Switching Noise)를 효과적으로 차단하였으며, 또한 신호 평면상에서 존재하는 신호선들 사이에서는 우수한 신호 전달 특성을 보였다. 제안된 구조의 EBG는 특정 사이즈에서 차단 주파수 1.2 GHz, 저지 대역폭은 8.3 GHz로 넓은 주파수 대역에서 －30 dB 이하의 저지 대역특성을 나타내었다. 또한 광대역의 저지 대역폭을 유지하면서 신호 평면상에 위치한 신호선이 우수한 신호 전달 특성을 가질 수 있는 전원면/접지면의 위치를 최종적으로 제안하였다.

• 한국항해항만학회지
• /
• 제34권7호
• /
• pp.511-516
• /
• 2010

GPS anomaly has increased according to the degradation of satellite performance, and many GPS users could be exposed to any kinds of error-included signals without any previous notice when unscheduled error occurred. RSIM (Reference Station Integrity Monitors) is a typical monitoring method to broadcast PRC (Pseudo Range Correction) for users. However, there were some cases that the receiver detected the anomalous satellite's signal even though it was unhealthy set, consequently it occurred a large range error. Then it is important to monitor the integrity of GPS signal and it is needed to devise the correction method of pseudorange by eliminating error-occurred PRN for notification to GPS users when it is monitored that the anomaly occurred. This paper proposes the basic concept of how to correct the pseudorange. The paper also shows the analysis results of PRN10 GPS anomaly occurred on day 39 in 2007 with corrected results by eliminating anomaly satellite (PRN10). The proposed correction method shows decreased pseudorange error range compared to the case when the anomaly satellite were used.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.11-16
• /
• 2016

Fuel assembly's mechanical characterization test facility (FAMeCT) in KAERI was constructed with upgraded functional features such as increased loading capacity, underwater vibration testing and severe earthquake simulation for extended fuel design guideline. This facility is designed and developed to provide out-pile fuel data for accident analysis model and fuel licensing. Functional tests of FAMeCT were performed to confirm functionality, structural integrity, and validity of newly-built fuel assembly mechanical test facility. Test program includes signal check of data acquisition system, load delivering capacity using real-sized fuel assemblies and a standard loading cylindrical rigid specimen. Fuel assembly's lateral bending test was carried out up to 30 mm of pull-out displacement. Limit case axial compression loading test up to 33 kN was performed to check structural integrity of UCPS (Upper Core Plate Simulator) support frame. Test results show that all test equipment and measurement system have acceptable range of alignment, signal to noise ratio, load carrying capacity limit without loss of integrity. This paper introduces newly constructed fuel assembly's mechanical test facility and summarizes results of functional test for the mechanical test equipment and data acquisition system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.705-708
• /
• 2003

In this paper, we have evaluated the methods to generate the reference signal for the diagnosis of multi-channel signals. The channel signal integrity can be known by the difference between the reference signal and each channel value. The generation method of reference signal is important in the diagnosis of multi-channel measurement system. The continuous weighting average method rejects the abnormal signal using weighting method and makes the reference signal using sumation of all channel values. This gives the simple and reasonable reference signal. The principle component analysis, one of the multivariate analysis methods, and the neural network method give the reliable reference signal by using signal models, and learning algorithm. Two methods can make the reliable reference if all signals are normal, but any signal having the drift have an effect on the reference.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.28-32
• /
• 1995

Bacause the chatter vibration is a main factor to damage on the quality and integrity, The cure is required peticurity in cykinderical plunge grinding. The chatter vibration relatied with wheel speed, workpiece and infeed rate. Therefore, we expressed more credible normal signal and chatter signal Pattern in accrdiance with wheel speed and acquired RMS signal of the accelerrometer. In thos study, after finding the chatter pattern, we applied two parameters, standard deviation and Kurtosis, to Neural Network.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.296-296
• /
• 2000

This paper describes the features of a transmission line and a wiring, and a design rule based on a demanded condition for a wiring. Like as the simulation of a circuit, by tracking the wiring path among parts that are disposed on PCB, we analyze the feature of the corresponding wiring using the design formula and rule. We implement a signal integrity simulator, which is capable of electrical and electronic simulation for the feature of a wiring signal and the corresponding signal, and the results are demonstrated.

• 융합신호처리학회논문지
• /
• 제13권4호
• /
• pp.211-219
• /
• 2012

본 논문에서는 VLBI상관서브시스템(VLBI Correlation Subsystem, VCS)의 상관블록 TCP/IP 출력데이터의 무결성 검사를 위한 소프트웨어의 개발과 상관출력 데이터의 손실을 방지하기 위한 성능개선 방법에 대해 기술한다. VCS의 상관결과는 TCP/IP 패킷 통신으로 데이터아카이브(Data Archive)에 저장된다. 본 논문에서는 데이터아카이브에 저장된 상관결과의 무결성을 확인하기 위해 VCS의 TCP/IP 패킷 정보를 이용한 무결성 검사 소프트웨어를 개발하였다. 개발한 소프트웨어를 이용하여 3단계의 무결성 검사 과정을 제안하고, 상관처리 실험을 통하여 제안방법의 유효성을 확인하였다. 또한 VCS와 데이터아카이브 사이에는 최소 적분시간 이내에 TCP/IP 패킷 통신이 완료되어야 하지만, 짧은 적분시간에 다량의 패킷과 대용량 데이터로 인해 패킷 손실이 발생할 뿐만 아니라 상관결과의 무결성 문제에도 영향을 미치는 것으로 확인되었다. 본 논문에서는 TCP/IP 패킷 손실의 원인을 분석하고 VCS의 FPGA(Field Programmable Gate Array) 설계에 대한 수정방법을 제시하여 상관결과의 무결성 문제를 해결하고자 한다.

• 정보통신설비학회논문지
• /
• 제8권1호
• /
• pp.1-5
• /
• 2009

In this paper, we propose a method that applies Vector Fitting (VF) technique to the equivalent circuit model for RF passive components. These days wireless communication system is getting smaller and smaller. So EMI/EMC is an issue in RF. We can solve PI/SI (Power Integrity/Signal Integrity) that one of EMI/EMC problem apply IFFT for 3D EM simulation multiple with input signal. That is time consuming task. Therefore equivalent circuit model using RF passive component is important. VF schemes are implemented to obtain the rational functions. S parameters of the equivalent circuit model is compared to those of EM simulation in case of the microstrip line structure.

• 한국전자파학회논문지
• /
• 제25권4호
• /
• pp.483-486
• /
• 2014

일반적으로 플립 칩은 와이어 본딩에 비해 신호 무결성을 저해하는 기생 성분이 작지만, 60 GHz 대역에서는 설계하기에 따라서 2 dB 이상의 삽입 손실 차이가 난다. 본 논문에서는 플립 칩 구조의 여러 설계 변수들에 따라 삽입 손실이 어떻게 변하는 지를 분석함으로써 설계를 최적화하는 방법을 제시한다.