• 한국군사과학기술학회지
• /
• 제21권2호
• /
• pp.204-210
• /
• 2018

As the 4th industrial revolution and artificial intelligence technology develop, it is expected that there will be a revolutionary changes in the security robot. However, artificial intelligence system requires enormous hardwares for tremendous computing loads, and there are many challenges that need to be addressed more technologically. This paper introduces precise tracking control technique of autonomous system that need to move repetitive paths for security purpose. The input feedforward signal is generated by using the inverse based iterative learning control theory for the 2 input 2 output nonminimum-phase system which was difficult to overcome by the conventional feedback control system. The simulation results of the input signal generation and precision tracking of given path corresponding to the repetition rate of extreme, such as bandwidth of the system, shows the efficacy of suggested techniques and possibility to be used in military security purposes.

• 한국정보통신학회논문지
• /
• 제26권12호
• /
• pp.1934-1937
• /
• 2022

The meaning of crosswalks and traffic lights in modern society has changed a lot as the enforcement of traffic signal violations has been strengthened. In this paper, we present a new next-generation traffic light method using radar and Can-bus communication methods suitable for the new traffic signal enforcement system. This method is a system that prevents accidents by transmitting information on the entry of a person and a car to a traffic light in a place where a person and a car passing through a mutually invisible traffic light cannot be seen. Since this system has only been developed for a month, it may be somewhat lacking in experimentation. However, in just one month, there have been no incidents except for a few people where the system has been installed.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.443-448
• /
• 2023

The ±1-order Kelly sidebands with dispersion-dependent spacing of mode-locking fiber lasers are investigated for frequency-tunable terahertz signal generation. The principle of dispersion dependence of Kelly sidebands is analyzed. A new method, which is a dispersion-management mechanism introduced into the fiber-laser cavity, is proposed to generate Kelly sidebands with widely tunable wavelength spacing. A spacing tuning range of up to 28.46 nm of the ±1-order Kelly sidebands is obtained in simulation. Using the data of the optical spectrum with dispersion-dependent Kelly sidebands, the frequency spectrum of generated terahertz signals is calculated. Consequently, the signal frequency can be changed from 0.09 to 2.27 THz.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권3호
• /
• pp.157-167
• /
• 2020

Fingerprinting method is useful when estimating the location of a requestor based on LTE signals in an urban area. To do this, it is necessary to acquire location-based signals everywhere in the service area for fingerprint DB generation in advance. However, there may be signal uncollected area within a wide service area, which may cause a problem that the positioning accuracy of the requestor is low. In order to solve this problem, in this paper, signal propagation modeling is performed based on the obtained measurements, and based on this model, the signal information in the non-acquisition region is estimated. To this end, techniques for modeling signal propagation according to a method using measurements are proposed. The performance of the proposed techniques is verified based on the measurements obtained on a test bed selected as Seocho-gu, Seoul. As a result, it can be seen that signal propagation modeling performed based on multidivision segmented measurements has the most performance improvement.

• 한국정보통신학회논문지
• /
• 제13권2호
• /
• pp.227-232
• /
• 2009

본 논문에서는 quadrature hybrid coupler를 사용하여 위상 변조 신호를 발생 할 수 있는 간단한 회로를 해석한다. 90o 위상차를 갖는 coupler 출력 단자의 반사 계수를 이용하여 일정한 위상 출력 값을 갖는 위상 변조 신호를 발생시키며, quadrature hybrid coupler와 지연 소자 그리고 전력 결합기 등 제안 구조를 사용하여 고차 PSK 신호를 발생할 수 있다. 하나의 90o hybrid coupler와 반사 소자에 의해 180o 위상차를 갖는 간단한 BPSK 신호 발생회로와 부가적인 지연 소자 및 전력 결합기에 의해 90o 위상차를 갖는 QPSK 신호를 발생한다. 모의 성능 실험 결과 3o 이내의 위상차를 갖는 양호한 PSK 신호 특성을 나타내었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.911-914
• /
• 2000

본 논문에서는 배터리가 없는 ASK 전송방식의 RFID(Radio Frequency IDentification) Transponder 칩 설계에 관한 내용을 다룬다. Transponder IC는 power-generation 회로, clock-generation 회로, digital block, modulator, overoltge protection 회로로 구성된다. 설계된 칩은 저전력 회로를 적용하여 원거리 transponder칩을 구현할 수 있도록 하였다. 설계된 회로는 0.25㎛ 표준 CMOS 공정으로 레이아웃하여 제작하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.495-496
• /
• 2007

An Over Current Relayng algorithm using 80c196kc micro processor was realized in this paper. This OCR Algorithm was verified with simulated fault signal. The fault signal was made by EMTP and realized by DOBLE to compare H/W test with S/W test. This simulations showed similar result between H/W and S/W test.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.551-555
• /
• 2009

This paper proposes a signal generation method for automatic control of a monitoring camera. Using the control signal, the monitoring camera can track a moving object and keep it near the image center for a longer time. The proposed method is estimated in the experiments that automatically move a maker located at the specified position to the image center.

• Journal of information and communication convergence engineering
• /
• 제9권4호
• /
• pp.435-440
• /
• 2011

This paper propose the method of constructing the highly efficiency adder and multiplier systems over finite fields. The addition arithmetic operation over finite field is simple comparatively because that addition arithmetic operation is analyzed by each digit modP summation independently. But in case of multiplication arithmetic operation, we generate maximum k=2m-2 degree of ${\alpha}^k$ terms, therefore we decrease k into m-1 degree using irreducible primitive polynomial. We propose two method of control signal generation for the purpose of performing above decrease process. One method is the combinational logic expression and the other method is universal signal generation. The proposed method of constructing the highly adder/multiplier systems is as following. First of all, we obtain algorithms for addition and multiplication arithmetic operation based on the mathematical properties over finite fields, next we construct basic cell of A-cell and M-cell using T-gate and modP cyclic gate. Finally we construct adder module and multiplier module over finite fields after synthesizing ${\alpha}^k$ generation module and control signal CSt generation module with A-cell and M-cell. Next, we constructing the arithmetic operation unit over finite fields. Then, we propose the future research and prospects.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.137-140
• /
• 2000

In this paper, we have proposed an efficient test generation method for asynchronous circuits. The test generation is based on specification level, especially on Signal Transition Graph(STG)〔1〕 which is a kind of specification method for asynchronous circuits. To conduct a high-level test generation, we have defined a high-level fault model, called single State Transition Fault(STF) model on STG and proposed a test generation algorithm for STF model. The effectiveness of the proposed fault model and its test generation algorithm is shown by experimental results on a set of benchmarks given in the form of STG. Experimental results show that the generated test for the proposed fault model achieves high fault coverage over single input stuck-at fault model with low cost. We have also proposed extended STF model with additional gate-level information to achieve higher fault coverage in cost of longer execution time.