• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.4
• /
• pp.223-233
• /
• 2009

It has been considered that fishing areas for shrimp beam trawl have been in ruin because Korean local governments have permitted trawling into the areas limited by the fisheries local regulations from 1994. Physical and biological effects of the trawling were investigated in the study. Physical effects were investigated by optical methods such as trawling tracking by side scan sonar and comparing the gear both before and after trawling. Biological aspects were investigated by grab sampling of benthic animals, concentration of trace metals in sediment and a flux evaluation of ${NH_4}^+,\;{PO_4}^-,\;and\;SiO_2$ by coring. The fishing activity had physical impacts on the seabed but these recovered naturally in less than fourty days naturally, which increased the benthic biodiversity, increases the trace metal concentration of and nutrient flux into the seawater, especially phosphate and silicate. This method and these results can help in further studies looking for disturbances by fishing.

• Ocean and Polar Research
• /
• v.42 no.1
• /
• pp.49-61
• /
• 2020

We analyzed the morphological characteristics of OCC (Ocean Core Complexes) in the middle part of the Central Indian Ridge (MCIR) using high-resolution geophysical data recorded on the Deep-Tow SideScan Sonar IMI-30 system. In terms of slope-gradient variations calculated from the high-resolution bathymetry data, the normal faults formed by seafloor spreading were associated generally with slopes > 30° and resulted in high backscatter intensities, which reflect more topographic effects than acoustic medium variation. However, the areas associated with gentle slopes < 10° tend to show the backscatter intensities reflecting the acoustic characteristic of the medium. We show that the detachment faults exposing the OCCs were initiated with high-angle normal faults (58°) exhibiting outward and inward dips of a breakaway zone. In order to examine the spatial distribution of OCC structures, we characterized the transition from magmatic-dominant seafloor with abyssal hills to tectonic-dominant seafloor with OCC using the down-slope direction variation. The slope direction of the seafloor generally tends to be perpendicular to the ridge azimuth in the magmatic-dominant zone, whereas it becomes parallel to the given ridge azimuth near the OCC structures. Therefore, this spatial change of seafloor slope directions indicates that the formation of OCC structures is causally associated with the tectonic-dominant spreading rather than magmatic extension. These results also suggest that the topographical characteristics of seafloor spreading and OCC structures can be distinguished using high-resolution geophysical data. Thus, we propose that the high-resolution bathymetry and backscatter intensity data can help select potential areas of exploitation of hydrothermal deposits in MCIR effectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.4
• /
• pp.343-349
• /
• 2011

Seabed topography and marine site survey should be performed first in the design and construction of marine structures. We could successfully acquire the seafloor topography information can be obtained by bathymetric survey and side scan sonar and the sediment layer thickness and 3D bedrock depth by seismic reflection. It is necessary to apply carry out the integrated interpretation to each other in the ocean civil Eng. In this paper, we have obtained information on the sea bottom topography and water depth at the same time using interferometer technique and on the basement depth by seismic reflection. We have performed to assess the proposed method on the seafloor topographic survey with bedrock.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.177-182
• /
• 2010

Sediment transport around artificial habitat which is induced by the change of flow due to installation of the structure plays a role not only as a defect function of subsidence and burial but also bottom-environment control function. Using Side Scan Sonar (SSS), Differential Global Positioning System (DGPS) and Scuba diving equipment, we investigated a facility condition of a dice reef installed on Pohang coast of the East Sea. Investigation result, at total 139 place, 10,526 dice reef was discovered. As the level which affects function of the above 0.5m, the case 4 place of burial (0.5~1.2m, 2.9%), scour appeared with 3 place (0.5m, 2.2%) and broken was appeared with 183 artificial reefs (1.74%). As a result, dice reef installed Pohang coast appeared to mostly stable.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.168-176
• /
• 2010

Stability and durability of the artificial reefs (ARs) for wildstock enhancement have been a key issue. We surveyed the side scan sonar (SSS), multi beam echo sounder (MBES) and scuba diving surveys confirmed that the ARs stability was age and type-dependent. A case of the stability of 8,438 ARs (60 group ARs) installed at 4 sites (Yangyang, Gangeung, Donghae and Samcheok) along the Gangwon coast of the East Sea (Sea of Japan). And a confirmation amount to 85.4% ARs remained safe, the rest 14.6% being influenced by a physical parameter of the waters. The representative influences by their circumstances were of breakage (6.3%). capsizing (8.3%). A group of a ARs to 61.7% ARs remained safe, the rest 38.3% being influenced by a physical parameter of the waters. The representative influences by their circumstances were of buried.

• Ocean and Polar Research
• /
• v.24 no.4
• /
• pp.483-490
• /
• 2002

Detailed investigations on both submarine and subaerial volcaniclastic deposits around Dokdo were carried out to identify geomorphologic characteristics, stratigraphy, and associated depositional processes of Dokdo caldera. Dokdo volcano has a gently sloping summit (about 11km in diameter) and relatively steep slope (basal diameter is about 20-25 km) rising above sea level at about 2,270m. We found ragged, elliptical-form of Dokdo caldera with a diameter of about 2km estimated by Chirp (3-11 kHz) sub-bottom profile data and side scan sonar data for the central summit area of Dokdo volcano. We interpreted that the volcaniclastic deposits of Dokdo unconformably consist of the Seodo (west islet) and the Dongdo(east islet) formations based on internal structure, constituent mineral composition, and bedding morphology. The Seodo Formation mainly consisted of massive or inversely graded trachytic breccias (Unit S-I), overlain by fine-grained tuff (Unit S-II), which is probably supplied by mass-wasting processes resulting from Dokdo caldera collapse. The Dongdo Formation consists of alternated units of stratified lapilli tuff and inversely graded basaltic breccia (Unit D-I, Unit D-III, and Unit D-V), and massive to undulatory-bedded basaltic tuff breccias (Unit D-II and Unit D-IV) formed by a repetitive pyroclastic surge and reworking processes. Although, two islets of Dokdo are geographically near each other, they have different formations reflecting their different depositional processes and eruptive stages.

• 한국해양학회지
• /
• v.29 no.3
• /
• pp.239-247
• /
• 1994

Bedform morphology of the giant ripples have been studied on the continental shelf of the Yellow Sea, East China sea and Korea-Tsushima Strait on the basis of side-scan sonar image, sub-bottom profile, sedimentary facies, geomorphology evidence and hydrology. There are well developed giant ripples ranging from 100 to 500 m in wavelengths and from 2 to 10 m in wave height at nine sites in the study area, which are covered by medium to fine sand. Most of them have been formed under the present hydrologic regime where the tidal currents and local currents or turbulence flows are superimposed. In the study area, giant ripples are produced on two different environments. One is at the geomorphic narrow zone such as the Korea Strait where currents are accelerated by the topographic effects, while the other is the sandy flat plain where tidal currents and local currents are harmonized.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.5
• /
• pp.609-621
• /
• 1998

Sand ridges in the South Sea of Korea have been investigated to reveal the surface morphology and vortical variation in sediment physical property. Both field and laboratory methods such as high resolution subbottom profiling, side scan sonar, and physical property and sediment textural study on cored sediments were employed. Asymmetric sand waves are found on the ridge, No prominent difference in the sediment was recorded throughout the ridge area. Sediment sorting is generally poor due to interbedded mud. Average compressional wave velocity is 1753 m/sec for the sand dominated core section, Most of cores show two prominent facies: facies A and B. Facies A is defined as modern mud sediment and B is dominated by relict sand. Facies B is characterized by gravel, sand, and shell fragment, It is suggested that the facies B was developed in transgressive environment by tide and sporadic high energy events.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.174-193
• /
• 2023

Korea is surrounded by the sea and has rivers connecting to it throughout the inland areas, which has been a geographical characteristic since ancient times. As a result, there have been exchanges and conflicts with various countries through the sea, and rivers have facilitated the transportation of ships carrying grain, goods paid for by taxes, and passengers. Since the past, the sea and rivers have had a significant impact on the lives of Koreans. Consequently, it is expected that there are many cultural heritages submerged in the sea and rivers, and continuous efforts are being made to discover and preserve them. Underwater cultural heritage is difficult to discover due to its location in the sea or rivers, making direct visual observation and exploration challenging. To overcome these limitations, various geophysical survey techniques are employed. Geophysical survey methods utilize the physical properties of elastic waves, including their reflection and refraction, to conduct surveys such as bathymetry, underwater topography and strata. These techniques detect the physical characteristics of underwater objects and seafloor formation in the underwater environment, analyze differences, and identify underwater cultural heritage located on or buried in the seabed. Bathymetry uses an echo sounder, and an underwater topography survey uses a side-scan sonar to find underwater artifacts lying on or partially exposed to the seabed, and a marine shallow strata survey uses a sub-bottom profiler to find underwater heritages buried in the seabed. However, the underwater cultural heritage discovered in domestic waters thus far has largely been accidental findings by fishermen, divers, or octopus hunters. This study aims to analyze and summarize the latest research trends in equipment used for underwater cultural heritage exploration, including bathymetric surveys, underwater topography surveys and strata surveys. The goal is to contribute to research on underwater cultural heritage investigation in the domestic context.

• Economic and Environmental Geology
• /
• v.46 no.6
• /
• pp.569-580
• /
• 2013

Co-rich ferromanganese crusts (Fe-Mn crusts) distributed on the seamounts in the western Pacific are potential economic resources for cobalt, nickel, platinum, and other rare metals in the future. Regulations for prospecting and exploration of Fe-Mn crusts in the Area, which enables the process to obtain an exclusive exploration right for blocks of the fixed size, were enacted recently by the International Seabed Authority, which led to public attention on its potential for commercial development. Evaluation and selection of a mining site can be established based on abundance and grade of Fe-Mn crusts in the site as well as topography that should be smooth enough for mining efficiency. Therefore, acquisition of shipboard echo-sounding and acoustic backscatter data are prerequisite to select potential mine sites in addition to visual and sampling operations. Acoustic backscatter data can be used to locate crust-covered areas in a regional scale with the understanding of acoustic properties of crust through its correlation with visual and sampling data. KIOST had collected the topographic and geologic data to assess the resources potential for Fe-Mn crusts in the west Pacific region from 1994 to 2001. However, they could not obtain acoustic backscatter data that is crucial for the selection of prospective mining sites. Therefore, additional exploration surveys are required to carry out side scan sonar mapping combined with seafloor observation and sampling to decide the blocks for application of an exclusive exploration right.