• Journal of Korea Water Resources Association
• /
• v.33 no.5
• /
• pp.647-658
• /
• 2000

The purpose of this study is to estimate the forward impact of water supply bottleneck using a supply-side input-output model. The failure cost analysed in this study can be used to estimate the values of the water supply reliability and can provide the bases of policy decision for the effective reallocation when water supply constraint will occur. So the position of water supply in the national economy is identified, and direct and indirect impacts are estimated by means of the interindustry analysis. Also the failure cost index is suggested to determine the prior order of water supply important in drought. By the way, the occurrence of drought having regional properties, the failure cost of the regional level using a national input-output table may be overestimated or underestimated. For the preceding reason, the failure cost estimated by a national input-output table is compared with and analysed to a regional input-output table for Kyung- Nam.g- Nam.

• Korean Journal of Organic Agriculture
• /
• v.30 no.3
• /
• pp.351-374
• /
• 2022

In recent years, the development of rice industry has been highly valued by the state. In hubei area, due to the development of the modernization and the shortage of labor, traditional way of rice cultivation methods is facing serious challenges, and economic benefits have become the decisive factor for the effective promotion and application of rice cultivation methods. According to the research results, first, in the input-side analysis, in the CCR model, D5, D12, D26, D28, D32, D36 farmers with high efficiency appear. The analysis result shows that among the 60 farmers, the average efficiency is 89%, and there is an inefficiency of 11%. In the BCC model, 14 farmers were identified as high-efficiency farmers, with an average efficiency of 0.9453. Second, in direct seeding cultivation of rice, the average scale efficiency is 0.9227, while the average pure technical efficiency is 0.9644. This shows that the effect of scale efficiency is greater than that of purely technical factors, ignoring the reasons for the low operational efficiency of direct seeding cultivation farmers. It can be predicted that with the further deepening of farmers' understanding of this planting mode, the proportion of rice direct seeding may be further expanded in the future. Relevant agricultural departments should further promote this technology to farmers, study the direct seeding technology using scientific methods, and evaluate the changes of this cultivation mode. The agricultural departments of government should concern about the climate risk assessment of direct seeding rice, the environmental impact assessment caused by the extensive use of herbicides, the application of mechanical technology in the process of direct seeding, the lodging of direct seeding rice, and other related issues.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.10
• /
• pp.27-39
• /
• 2023

To effectively manage flood risk, it is crucial to assess the stability of flood defense structures like levees under extreme flood conditions. This study focuses on the time-dependent probabilistic assessment of embankment slope stability when subjected to rapid water level drops. We integrate seepage analysis results from finite element analysis with slope stability analysis and employ Monte Carlo simulations to investigate the time-dependent behavior of the slope during rapid drawdown. The resulting probability of failure is used to develop fragility curves for the levee slope. Notably, the probability of slope failure remains low up to a specific water level, sharply increasing beyond that threshold. Furthermore, the fragility curves are strongly influenced by the rate of drawdown, which is determined through hydraulic analysis based on flood scenarios. Climate change has a significant impact on the stability of the water-side slope of the embankment due to water level fluctuations.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.177-185
• /
• 2007

Even though there were no clear definitions of the short game and short game distance, short game capability is crucial for a good golf score. Generally, chip shot and pitch shot are regarded as two principal components of the short game. Chip shot is a short, low trajectory shot played to the green or from trouble back into play. Pitch shot is a high trajectory shot of short length. Biomechanical studies were conducted usually to analyze full swing and putting motions. The purpose of the study was to reveal the kinematical differences between professional golfers' 30 yard $53^{\circ}wedge$ chip shot and $56^{\circ}wedge$ pitch shot motions. Fifteen male professional golfers were recruited for the study. Kinematical data were collected by the 60 Hz three-dimensional motion analysis system. Statistical comparisons were made by paired t-test, ANOVA, and Duncan of the SPSS 12.0K with the $\alpha$ value of .05. Results show that both the left hand and the ball were placed left of the center of the left and right foot at address. The left hand position of the chip shot was significantly left side of that of the pitch shot. But the ball position of the pitch shot was significantly right side of that of the chip shot. All body segments aligned to the left of the target line, open, at address. Except shoulder, there were no significant pelvis, knee, and feet alignment differences between chip shot and pitch shot. These differences at address seem for the ball height control. Pitch shot swing motions(the shoulder and pelvis rotation and the club head travel distance) were significantly bigger than those of the chip shot. Club head velocity of the pitch shot was significantly faster than that of the chip shot at the moment of impact. This was for the same shot length control with different lofted clubs. Swing motion differences seem mainly caused by the same shot length control with different ball height control.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.85-97
• /
• 2010

The present study aims at estimating the model of bus bunching duration along with its influential determinants in an attempt to understand the status of bus bunching being created by buses from various routes converging into one bus stop. To do so, the duration analysis, a well-known survival analysis, was adopted in order to capture the distribution of duration time as for 8 base lines, accordingly developing the model best fit for weibull distribution. Key attention to draw out the duration time model for bus bunching phenomena was laid, by analyzing 18 impact factors, on such criterion variables as number of berth, number of bus line in each berth and maximum capacity of on-and-off passengers in each line. Comparison in two typical types of bus lane was made between bus-only center lane(Dobong Mia-ro) and normal street-side lane(Tongil Euiju-ro). In this regard, the study, based on the model as above, suggested appropriate alternatives to improve the bus operation by effectively controlling bus bunching.

• Nuclear Engineering and Technology
• /
• v.40 no.4
• /
• pp.255-268
• /
• 2008

The greater demand for electricity and the available capacity within safety margins in some operating NPPs are prompting nuclear utilities to request license modification to enable operation at a higher power level, beyond their original license provisions. Such plant modifications require an in-depth safety analysis to evaluate the possible safety impact. The analysis must consider the thermo hydraulic, radiological and structural aspects, and the plant behavior, while taking into account the capability of the structures, systems and components, and the reactor protection and safeguard systems set points. The purpose of this paper is to introduce international experiences and approaches for implementation of power uprates related to the reactor thermal power of nuclear power plants. The paper is intended to give the reader a general overview of the major processes, work products, issues, challenges, events, and experiences in the power uprates program. The process of increasing the licensed power level of a nuclear power plants is called a power uprate. One way of increasing the thermal output from a reactor is to increase the amount of fissile material in use. It is also possible to increase the core power by increasing the performance of the high power bundles. Safety margins can be maintained by either using fuels with a higher performance, or through the use of improved methods of analysis to demonstrate that the required margins are retained even at the higher power levels. The paper will review all types of power uprates, from small to large, and across various reactor types, including light and heavy water, pressurized, and boiling water reactors. Generally, however, the content of the report focuses on power uprates of the stretch and extended type. The International Atomic Energy Agency (IAEA) is developing a technical guideline on power uprates and side effects of power uprates in nuclear power plants.

• Journal of Industrial Convergence
• /
• v.17 no.1
• /
• pp.33-39
• /
• 2019

The purpose of this study was to present the direction and implications of urban development in relation to climate risk factors and environment for practical implementation of urban development in response to climate change. The research method was carried out through a qualitative data survey and analysis. As a result of the study, the direction of urban development according to the climate risk factors emphasized the importance of preparing conditions for urban development by establishing a damage prevention system for natural disasters and analyzing the risk of natural disasters by conducting analysis of the impact and vulnerability of climate change in urban planning. The direction of urban development on the environmental side suggested the need for the promotion of public transport oriented development (TOD) in the form of urban planning to realize sustainable and practical urban development. Future research directions will need to be supplemented with more quantitative and empirical findings.

• Journal of Welding and Joining
• /
• v.30 no.1
• /
• pp.64-71
• /
• 2012

The characteristics of high heat input (342kJ/cm) EG (Electro Gas Arc) welded joint of EH36-TM steel has been investigated. The weld metal microstructure consisted of fine acicular ferrite (AF), a little volume of polygonal ferrite (PF) and grain boundary ferrite (GBF). Charpy impact test results of the weld metal and heat affected zone (HAZ) met the requirement of classification rule (Min. 34J at $-20^{\circ}C$). In order to evaluate the relationship between the impact toughness property and the grain size of HAZ, the austenite grain size of HAZ was measured. The prior austenite grain size in Fusion line (F.L+0.1 mm) was about $350{\mu}m$. The grain size in F.L+1.5 mm was measured to be less than $30{\mu}m$ and this region was identified as being included in FGHAZ(Fine Grain HAZ). It is seen that as the austenite grain size decreases, the size of GBF, FSP (Ferrite Side Plate) become smaller and the impact toughness of HAZ increases. Therefore, the CGHAZ was considered to be area up to 1.3mm away from the fusion line. Results of TEM replica analysis for a welded joint implied that very small size ($0.8\sim1.2{\mu}m$) oxygen inclusions played a role of forming fine acicular ferrite in the weld metal. A large amount of (Ti, Mn, Al)xOy oxygen inclusions dispersed, and oxides density was measured to be 4,600-5,300 (ea/mm2). During the welding thermal cycle, the area near a fusion line was reheated to temperature exceeding $1400^{\circ}C$. However, the nitrides and carbides were not completely dissolved near the fusion line because of rapid heating and cooling rate. Instead, they might grow during the cooling process. TiC precipitates of about 50 ~ 100nm size dispersed near the fusion line.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.183-188
• /
• 2003

The dielectric constants of fluorine-containing epoxy resins, 2-diglycidylether of benzotrifluoride(FER)/4,4'-diamino-diphenyl methane (DDM) and diglycidylether of bisphenol-A (DGEBA)/DDM systems were evaluated by dielectric spectrometer. Glass transition temperature and thermal stability factors, including initial decomposed temperature, temperatures of maximum rate of degradation, and decomposition activation energy of the cured specimens were investigated by dynamic mechanical analysis and thermogravimetric analysis. For the mechanical properties of the casting specimens, the fracture toughness, flexural, and impact tests were performed, and their fractured surfaces were examined by scanning electron microscope. The dielectric constant of FER/DDM system was lower than that of commercial DGEBA/DDM system, and the mechanical properties of the cured specimens showed higher values than those of DGEBA/DDM system. This was probably due to the introduction of trifluoromethyl (CF$_3$) group into the side chain of the epoxy resins, resulting in improving the electric and mechanical properties of the epoxy cure system studied.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.61-67
• /
• 2020

In this paper, we calculated the warpage of bare substrates and chip attached substrates by using FEM (Finite Element Method), and compared and analyzed the effect of the chips' attachment on warpage. Also, the effects of layer thickness of substrates for reducing warpage were analyzed and the conditions of layer thickness were analyzed by signal-to-noise ratio of Taguchi method. According to the analysis results, the direction of warpage pattern in substrates can change when chips are attached. Also, the warpage decreases as the difference in the CTE (coefficient of thermal expansion) between the top and bottom of the package decreases and the stiffness of the package increases after chips are loaded. In addition, according to the impact analysis of design parameters on substrates where chips are not attached, in order to reduce warpage, the inner layers of the circuit layer Cu1 and Cu4 has be controlled first, and then concentrated on the thickness of the solder resist on the bottom side and the thickness of the prepreg layer between Cu1 and Cu2.