• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.2
• /
• pp.33-41
• /
• 2010

Many experimental results shows that RSA-CRT algorithm can be broken by fault analysis attacks. We analyzed the previous fault attacks and their countermeasures on RSA-CRT algorithm and found an weakness of the countermeasure proposed by Abid and Wang. Based on these analyses, we propose a new countermeasure which uses both double exponentiation and fault infective computation method. The proposed method efficiently computes a fault verification information using double exponentiation. And, it is designed to resist simple power analysis attack and (N-1) attack.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.1
• /
• pp.1-9
• /
• 2021

This paper proposes to automate the process of predicting crypto-operations from the power signal generated in RSA decoding process by frequency analysis and K-means algorithm. RSA decoding process is divided into square and multiply operation, and if we can predict the type of operations over time, we will know the RSA key value. After converting the power signal generated in the process of decoding into two-dimensional frequency signal, this paper used K-means algorithm to classify the frequency vector according to the type of operation. these classified frequency vector were used to predict the types of operations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.3
• /
• pp.999-1021
• /
• 2023

Differential spatial modulation uses the antenna index to transmit information, which improves the spectral efficiency, and completely bypasses any channel side information in the recommended setting. A generalized distributed multiple turbo coded-cooperative differential spatial modulation based on distributed multiple turbo code is put forward and its performances in Rayleigh fading channels is analyzed. The generalized distributed multiple turbo coded-cooperative differential spatial modulation scheme is a coded-cooperation communication scheme, in which we proposed a new joint parallel iterative decoding method. Moreover, the code matched interleaver is considered to be the best choice for the generalized multiple turbo coded-cooperative differential spatial modulation schemes, which is the key factor of turbo code. Monte Carlo simulated results show that the proposed cooperative differential spatial modulation scheme is better than the corresponding non-cooperative scheme over Rayleigh fading channels in multiple input and output communication system under the same conditions. In addition, the simulation results show that the code matched interleaver scheme gets a better diversity gain as compared to the random interleaver.

• Journal of Distribution Science
• /
• v.20 no.3
• /
• pp.95-106
• /
• 2022

Purpose: This study aims to verify the effects of omnichannel characteristics on pleasure, resistance and repurchase intention in the omnichannel situation in order to provide the innovative commercial business. Research design, data and methodology: The study examined relations between research concepts centered on previous studies, set hypotheses, developed a research model, and verified the model through a questionnaire survey. A total of 297 questionnaires were used for the final analysis, excluding the questionnaires showing insincere or outliers. Results: First, Omnichannel showed multi-dimensional characteristics consisting of consistency, innovation, economy, and integration. Second, innovation and economic feasibility had a positive effect on pleasure. Third, only economic feasibility had a negative effect on user resistance. Fourth, consumers' shopping pleasure had a negative effect on user resistance. Fifth, repurchase intention of consumers was positively affected by innovation. Conclusions: This research contributed to extend academic framework of distribution research by examining causal relationship through adoption of economic and innovation factors as new characteristics from the integrated perspective beyond the research frame of the existing omnichannel distribution environment. Companies should provide meaningful experiences by resolving concerns about side effects caused by human-computer interaction and providing smart information that matches the products most suitable for consumer needs.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.171-174
• /
• 2021

최근 사물인터넷(IoT) 환경에서 다양한 장비의 인터넷 통신이 가능하여 이에 적절한 경량 블록 암호 알고리즘에 대한 연구가 활발히 진행되고 있다. ICISC 2020에서 새로 발표된 국산 경량 블록 암호 알고리즘인 PIPO는 새로운 경량 S-Box를 조합한 unbalanced-Bridge 구조로 효율적인 비트슬라이싱 구현을 제공한다. IoT 환경에 PIPO가 적용되기 위해서는 부채널 분석에 대한 안전성이 보장되어야 한다. 따라서 본 논문에서는 PIPO가 1차 CPA 공격에 취약함을 확인한다. 그리고 부채널 공격에 대응하기 위해 1차 마스킹 기법을 제안한다. 제안한 마스킹 기법은 1차 CPA 공격에 안전하였으며, 마스킹 적용 전보다 -375%의 성능을 보였다. 그리고 기존 기법보다 1287% 속도가 빨라진 것을 확인하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2024.05a
• /
• pp.367-370
• /
• 2024

양자컴퓨터 시대가 눈앞에 도래한 지금 차세대 암호로 주목받고 있는 양자 내성 암호는 다양한 수학적 알고리즘에 안전성을 기반하고 있으나 이 안전성을 위협하는 대표적인 공격 기법 중 하나인 부채널 분석 공격에 대응하기 위한 노력들이 계속되어 왔다. 이 논문에서는 코드 기반 양자 내성 암호를 중심으로 알고리즘에 위협적인 부채널 분석 공격에 대한 연구 동향을 분석하였다. 그리고 NIST 에서 PQC 표준화를 위해 Round 를 진행 중인 후보 중 하나인 코드 기반 알고리즘 MEDS 에 대해 소개하고, MEDS 알고리즘의 최적화를 위해 기존에 연구되었던 코드 기반 암호에 대한 부채널 분석 공격 대응 측면에서의 알고리즘의 안전성 확보라는 보안 비용과 하드웨어 가속 등을 통한 성능 향상이 적절한 조화를 이룰 수 있도록 설계하기 위한 방안에 대해 알아보았다.

• Journal of Intelligence and Information Systems
• /
• v.22 no.4
• /
• pp.123-138
• /
• 2016

This study investigates intents of acquisitions in information technology industries. Mergers and acquisitions are a strategic decision at corporate-level and have been an important tool for a firm to grow. Plenty of firms in information technology industries have acquired startups to increase production efficiency, expand customer base, or improve quality over the last decades. For example, Google has made about 200 acquisitions since 2001, Cisco has acquired about 210 firms since 1993, Oracle has made about 125 acquisitions since 1994, and Microsoft has acquired about 200 firms since 1987. Although there have been many existing papers that theoretically study intents or motivations of acquisitions, there are limited papers that empirically investigate them mainly because it is challenging to measure and quantify intents of M&As. This study examines the intent of acquisitions by measuring specific intents for M&A transactions. Using our measures of acquisition intents, we compare the intents by four acquisition types: (1) the acquisition where a hardware firm acquires a hardware firm, (2) the acquisition where a hardware firm acquires a software/IT service firm, (3) the acquisition where a software/IT service firm acquires a hardware firm, and (4) the acquisition where a software /IT service firm acquires a software/IT service firm. We presume that there are difference in reasons why a hardware firm acquires another hardware firm, why a hardware firm acquires a software firm, why a software/IT service firm acquires a hardware firm, and why a software/IT service firm acquires another software/IT service firm. Using data of the M&As in US IT industries, we identified major intents of the M&As. The acquisition intents are identified based on the press release of M&A announcements and measured with four categories. First, an acquirer may have intents of cost saving in operations by sharing common resources between the acquirer and the target. The cost saving can accrue from economies of scope and scale. Second, an acquirer may have intents of product enhancement/development. Knowledge and skills transferred from the target may enable the acquirer to enhance the product quality or to expand product lines. Third, an acquirer may have intents of gain additional customer base to expand the market, to penetrate the market, or to enter a foreign market. Fourth, a firm may acquire a target with intents of expanding customer channels. By complementing existing channel to the customer, the firm can increase its revenue. Our results show that acquirers have had intents of cost saving more in acquisitions between hardware companies than in acquisitions between software companies. Hardware firms are more likely to acquire with intents of product enhancement or development than software firms. Overall, the intent of product enhancement/development is the most frequent intent in all of the four acquisition types, and the intent of customer base expansion is the second. We also analyze our data with the classification of production-side intents and customer-side intents, which is based on activities of the value chain of a firm. Intents of cost saving operations and those of product enhancement/development can be viewed as production-side intents and intents of customer base expansion and those of expanding customer channels can be viewed as customer-side intents. Our analysis shows that the ratio between the number of customer-side intents and that of production-side intents is higher in acquisitions where a software firm is an acquirer than in the acquisitions where a hardware firm is an acquirer. This study can contribute to IS literature. First, this study provides insights in understanding M&As in IT industries by answering for question of why an IT firm intends to another IT firm. Second, this study also provides distribution of acquisition intents for acquisition types.

• Journal of the Korean association of regional geographers
• /
• v.13 no.4
• /
• pp.409-421
• /
• 2007

The purpose of this paper is to consider the formation processes and depositional conditions of bars formed at the upper-stream part of Sayeon Dam since Sayeon Dam construction in 1964. Results of analyzing the shape characteristics of bars and their sediment grain size distribution are as follow: Firstly, bars are able to categorized as subaqueous bars (A, B), mid-channel bars(C, D), and tributary side-bars(E). Secondly, the outline of bars has longish along the flow path, and their height lowers more and more going towards downstream. Also the height of bar surface tend to heighten from flow path to mountain slope. However, the near part of A is comparatively higher than its distant part, A is defined as a subaqueous natural levee and back swamp. Thirdly, the average particle size of A and B become smaller toward mountain slope. In transportation style, ratio of suspended load become higher toward mountain slope. Fourthly, sorting is worse to very worse according with lake's random changable water level. Fifthly, bar A and B were formed by vertical sedimentation of sediments according as sediments transported along flow path in the subaqueous conditions were spreaded out of flow path. C and D were formed by bed load as flood level lowered. And E was formed by vertical sedimentation while stream flow stopped in tributary's mouth areas with the water level heightening.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.316-323
• /
• 2013

The use of artificial roughness in various forms of shapes and sizes is the most common and effective way to improve the performance of a flat-plate solar collector. In the present study, numerical analysis on heat transfer and pressure drop was performed in a rectangular channel with various rib arrays. The uniform heat flux is applied to the channel from the upper side. The forms of ribs considered in this study were rib $90^{\circ}$, groove $90^{\circ}$, groove $60^{\circ}$, baffle $90^{\circ}$, baffle $60^{\circ}$, wave $90^{\circ}$ and wave $60^{\circ}$. Air is the working fluid, and the Reynolds number ranges from 3200 to 17800. Nusselt number and friction factor were investigated to predict the performance of the system with various type of ribs. The average Nusselt number and pressure drop were increased with the increase of velocity in all types of ribs. The highest heat transfer and pressure drop occurred for the baffle $90^{\circ}$, but highest performance factor considering heat transfer and pressure drop together occurred for the groove $60^{\circ}$. Therefore, heat transfer and pressure drop should be considered together when a flat plate solar collector is designed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.151-160
• /
• 2017

Among the methods of developing tourist spots and culture as the experience contents, it is a common method to display high-quality video images on a large display, and it is necessary to make a special difference between the participant's active participation and the visual experience in other regions. In this paper, using the single molecular OLED and active type, the regional tourist spots blend transparent OLED dual-layer display systems with the extended image implementation and augmented interaction techniques to give the participants a real-world experience, such as directing to new experiences and beautiful sights. In this paper, additional images and UI layers are applied to the layers of the images to allow visitors to experience sightseeing information, weather, maps, accommodations, festivals and photo materials with image. In addition to the dual-layer system, it also added a multi-display system that additionally has one vertical 55-inch display on each side, adding to the experience the immersive experience and interface interlocking fun. By using transparent OLED, dual layer panel and 3-channel Multi-image playback technique, the augmented type experience contents which can experience the local attractions in Jeollanamdo province in Korea at all time without any limitation of time and space were developed.