• 한국결정성장학회지
• /
• 제7권2호
• /
• pp.207-215
• /
• 1997

Ionized Cluster Beam Deposition(ICBD)방법을 이용하여 Si(100)기판과 TiN(60 nm)/Si(100)기판위에 Al 박막을 증착하였다. 증착된 Al 박막의 증착특성은 $\alpha$-step, four-point-probe, XRD, SEM, AES 측정장치를 가지고 조사해 보았다. 도가니 온도가 증가함에 따라 Al 박막의 증착속도는 증가하였고 비저항 값은 감소하였다. 도가니 온도가 $1800^{\circ}C$인 경우 가속전압이 증가함에 따라 연속적이며 평평한 박막이 형성되고 비저항이 감소되었다. 최소의 비저항 값은 Si 기판에서는 가속전압이 4 kV일 때 3.4 $\mu \Omega \textrm {cm}$, TiN 기판에서는 가속전압이 2kV일 때 3.6 $\mu \Omega \textrm {cm}$. AES 분석결과 형성된 박막내에서는 불순물이 존재하지 않는 것을 알 수 있었다. 따라서 Al 박막의 비저항은 박막충의 미세구조에 의해 영향을 받는다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.304.1-304.1
• /
• 2014

Flat-panel displays have been growing as an essential everyday product in the current information/communication ages in the unprecedented speed. The forward-coming applications require light-weightness, higher speed, higher resolution, and lower power consumption, along with the relevant cost. Such specifications demand for a new concept-based materials and applications, unlike Si-based technologies, such as amorphous Si and polycrystalline Si thin film transistors. Since the introduction of the first concept on the oxide-based thin film transistors by Hosono et al., amorphous oxide thin film transistors have been gaining academic/industrial interest, owing to the facile synthesis and reproducible processing despite of a couple of shortcomings. The current work places its main emphasis on the binary oxides composed of ZnO and SnO2. RF sputtering was applied to the fabrication of amorphous oxide thin film devices, in the form of bottom-gated structures involving highly-doped Si wafers as gate materials and thermal oxide (SiO2) as gate dielectrics. The physical/chemical features were characterized using atomic force microscopy for surface morphology, spectroscopic ellipsometry for optical parameters, X-ray diffraction for crystallinity, and X-ray photoelectron spectroscopy for identification of chemical states. The combined characterizations on Zn-Sn-O thin films are discussed in comparison with the device performance based on thin film transistors involving Zn-Sn-O thin films as channel materials, with the aim to optimizing high-performance thin film transistors.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.130-130
• /
• 2010

Thin Si films were grown by a plasma-enhanced chemical vapor deposition (PECVD, SNTEK, Korea) system. Two different deposition condition were applied and formed a fully amorphous Si (a-Si) film and a micromorph mixing of microcrystalline Si (mc-Si) and a-Si film. Under one sun illumination, the micromorph device provided the enhanced open circuit voltage and fill factor values. It presents the fabrication of the micromorph Si film and the a-Si film by modulating a deposition condition. The performances of the Si thin film Schottky solar cells are discussed.

• 한국전기전자재료학회논문지
• /
• 제25권2호
• /
• pp.121-124
• /
• 2012

The characteristics of Ga-doped zinc oxide (GZO) thin films deposited at different deposition temperatures (TS~250 to $550^{\circ}C$) on 4H-SiC have been investigated. Structural and electrical properties of GZO thin film on n-type 4H-SiC(0001) were investigated by using x-ray diffraction(XRD), atomic force microscopy(AFM), Hall effect measurement, barrier height from I-V curve and Auger electron spectroscopy(AES). XRD $2\theta$ scan shows GZO thin film has preferential orientation with c-axis perpendicular to SiC substrate surface. The lowest resistivity ($\sim1.9{\times}10^{-4}{\Omega}cm$) was observed for the GZO thin film deposited at $400^{\circ}C$. As deposition temperature increases, barrier height between GZO and SiC was increased. Whereas, resistivity of GZO thin films as well as barrier height between GZO and SiC were increased after annealing process in air atmosphere. It has been found that the c-axis oriented crystalline quality as well as the relative amount of activated Ga3+ ions and oxygen vacancy may affect the electrical properties of GZO films on SiC.

• 전자공학회논문지A
• /
• 제30A권10호
• /
• pp.59-66
• /
• 1993

PZT thin film deposited by rf magnetron sputtering was annealed by rapid thermal process(RTP) in PbO ambient to prevent vaporing of Pb and interface reactions. Si and TiN/Ti/Si substrates were prepared to survey application of TiN/Ti layer which can prevent interface interaction with Si and crack of PZT thin films. As temperature increased. PZT thin films surface on Si substrate appeared more severe cracks which should affect electrical properties deadly. TiN/Ti(40-150${\mu}{\Omega}{\cdot}cm$) layer applied for buffer layer suppressed interface interaction and film cracking. The measured leakage current(LC) and breakdown voltage(BV) of PZT thin film on TiN/Ti/Si substrate annealed at 650$^{\circ}$C for 15 sec (thickness of 2500$\AA$) were 38 nA/cm2 and 3.5 MV/cm and dielectric constant was 310 at 1 MHz, and remanent polarization (Pr) and coercive field (Ec) were 6.4${\mu}C/cm^{2}$ and 0.2MV/cm at 60 Hz, respectively.

• 센서학회지
• /
• 제16권4호
• /
• pp.259-262
• /
• 2007

This paper describes the electrical characteristics of polycrystalline (poly) 3C-SiC thin film diodes, in which poly 3C-SiC thin films on n-type and p-type Si wafers, respectively, were deposited by APCVD using HMDS, $H_{2}$, and Ar gas at $1150^{\circ}C$ for 3 hr. The schottky diode with Au/poly 3C-SiC/Si (n-type) structure was fabricated. Its threshold voltage ($V_{bi}$), breakdown voltage, thickness of depletion layer, and doping concentration ($N_{D}$) value were measured as 0.84 V, over 140 V, 61 nm, and $2.7{\times}10^{19}cm^{-3}$, respectively. Moreover, for the good ohmic contact, Al/poly 3C-SiC/Si (n-type) structure was annealed at 300, 400, and $500^{\circ}C$, respectively for 30 min under the vacuum condition of $5.0{\times}10^{-6}$ Torr. Finally, the p-n junction diodes fabricated on the poly 3C-Si/Si (p-type) were obtained like characteristics of single 3CSiC p-n junction diode. Therefore, poly 3C-SiC thin film diodes will be suitable for microsensors in conjunction with Si fabrication technology.

• 한국위성정보통신학회논문지
• /
• 제7권3호
• /
• pp.54-57
• /
• 2012

최근 비접촉식 액정배향방법에 대한 요구가 산업계 전반으로 확산되면서, 기존의 UV 광배향을 비롯하여, 여러 가지 비접촉식 액정 배향방법이 활발히 연구되고 있다. 본 연구에서는 이러한 비접촉식 액정배향방법 중에서 SiOF 무기막에 이온빔을 정량적으로 조사하는 방법을 사용하여 액정을 배향하고, 이 기술을 사용하여, 상용화 수준의 IPS(In-Plane Switching) 방식의 액정 셀을 제작함으로써 전기광학 특성을 평가하였다. 특히 이러한 무기막 배향의 경우 배향안정성에 많은 문제를 가지고 있는 것이 보통이나, 본 연구에서 제안한 방법으로 제조된 평가셀은 $200^{\circ}C$의 높은 온도로 열처리를 하여도 배향성을 잃지 않고 균일한 배향을 지속하는 것을 관찰할 수 있었다.

• 한국전자통신학회논문지
• /
• 제17권6호
• /
• pp.1069-1074
• /
• 2022

본 연구에서는 Nb₂O₅/SiO₂ 이중 버퍼층위에 ITO박막을 증착하여, SiO₂버퍼층 두께 변화 (40~50 nm)에 따른 전기적 및 광학적 특성을 조사하였다. Nb₂O₅/SiO₂ 이중 버퍼층을 도입한 ITO박막의 표면 거칠기는 0.815에서 1.181 nm 범위의 작은 값을 가지는 매끄러운 형상을 보였고, 면저항은 99.3~134.0 Ω/sq. 범위로 정전용량식 터치스크린 패널에 적용하는데 문제가 없는 것으로 나타났다. 특히 Nb₂O₅ (10 nm) / SiO₂ (40 nm) 이중 버퍼층을 삽입한 ITO박막의 단파장(400~500 nm) 영역에서의 평균 투과도와 색도(b^*)는 83.58 % 와 0.05로 이중버퍼층이 삽입되지 않은 ITO박막의 74.46 % 와 4.28에 비해 상당히 향상된 결과를 나타내었다. 이를 통해 Nb₂O₅/SiO₂ 이중 버퍼층을 도입한 ITO박막에서 인덱스 매칭 효과로 인해 단파장 영역의 투과도 및 색도와 같은 광학적 특성이 현저히 향상되었음을 확인할 수 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제8권1호
• /
• pp.36-40
• /
• 2007

Inorganic layers, such as SiOxNy and SiOx deposited using plasma sublimation method, were tested as passivation layer for organic thin-film-transistors (OTFTs). OTFTs with bottom-gate and bottom-contact structure were fabricated using pentacene as organic semiconductor and an organic gate insulator. SiOxNy layer gave little change in characteristics of OTFTs, but SiOx layer degraded the performance of OTFTs severely. Inferior barrier properties related to its lower film density, higher water vapor transmission rate (WVTR) and damage due to process environment of oxygen of SiOx film could explain these results. Polyurea and polyvinyl acetates (PVA) were tested as organic passivation layers also. PVA showed good properties as a buffer layer to reduce the damage come from the vacuum deposition process of upper passivation layers. From these results, a multilayer structure with upper SiOxNy film and lower PVA film is expected to be a superior passivation layer for OTFTs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.589-592
• /
• 1999

This paper describes direct $\mu$C-Si/CaF$_2$/glass thin film growth by RPCVD system in a low temperature for thin film transistor (TFT), photovoltaic devices. and sensor applications. Experimental factors in a low temperature direct $\mu$ c-Si film growth are presented in terms of deposition parameters: SiH$_4$/H$_2$ ratio, chamber total pressure, substrate temperature, rf power, and CaF$_2$ buffer layer. The structural and electrical properties of the deposited films were studied by means of Raman spectroscopy, I-V, L-I-V, X-ray diffraction analysis and SEM. we obtain a crystalline volume fraction of 61%, preferential growth of (111) and (220) direction, and photosensitivity of 124. We achieved the improvement of crystallinity and electrical property by using the buffer layers of CaF$_2$ film.