• Journal of the Korean Vacuum Society
• /
• v.7 no.s1
• /
• pp.123-133
• /
• 1998

Amorphous silicon (a-Si) was crystallized by metal induced crystallization using metal solution. The a-Si films spin coated with a 50,000 ppm Ni solution were crystallized at as low as $500^{\circ}C$. Needlelike morphology, developed as a result of the migration of $NiSi_2$, precipitates, appears in the MIC poly-Si. The growth of the needlelike crystallites proceeds to a direction parallel to (111). The crystallization temperature can be lowered to $450^{\circ}C$ by Au addition. The enhancement of crystallization results from the decrease of interfacial energy at the NiSi2/Si interface by Au addition.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.381-386
• /
• 2011

We fabricated the ZnO (zinc oxide)/$SiO_2$ (silicon dioxide) branch hierarchical nanostructures by the e-beam evaporation of $SiO_2$ onto the surface of the electrochemically grown ZnO nanorods on Si substrate, which leads to the self-assembled $SiO_2$ nanorods by oblique angle deposition between vapor flux and vertically aligned ZnO nanorods. In order to investigate the effects of $SiO_2$ deposition on the morphology and optical property of ZnO/$SiO_2$ branch hierarchical nanostructures, the evaporation time of $SiO_2$ was varied under a fixed deposition rate of 0.5 nm/s. The vertically aligned ZnO nanorods on Si substrate exhibited a low reflectance of <10% in the wavelength range of 300~535 nm. For ZnO/$SiO_2$ branch hierarchical nanostructures at 100 s of evaporation time of $SiO_2$, the more improved antireflective property was achieved. From these results, ZnO/$SiO_2$ branch hierarchical nanostructures are very promising for optoelectronic and photovoltaic device applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.80-83
• /
• 2005

$Nd:YVO_4$ 연속발진 레이저 (CW laser)를 이용하여 다결정실리콘 (CLC poly-Si)을 제작하였다. CLC 다결정 실리콘의 결정화 영역은 결정립 크기에 따라 SLC(Sequential Lateral Crystallization) 영역, SLG(Super Lateral Grain) 영역 및 Small Grain 영역으로 구분된다. 레이저를 중첩스캔 하여 제작한 CLC 다결정실리콘의 경우, 레이저 스캔 경계에서 단결정립이 형성됨을 SEM으로 확인하고, CLC 다결정실리콘의 결정성을 XRD와 라만 스펙트럼(Raman spectrum)을 이용하여 조사하였다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.329-329
• /
• 2004

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.331-331
• /
• 2004

• Korean Journal of Materials Research
• /
• v.6 no.4
• /
• pp.428-435
• /
• 1996

초미립 SiC분말과 SiC platelet을 2차성으로 Si3N4에 첨가하여 SiC/Si3N4 하이브리드 복합체를 가압소결로 제조한 후 2차상의 영향을 조사한 결과핫프레스법을 이용한 경우 SiC platelet은 Si3N4 기지 복합채의 치밀화를 저해하지 않고 초미립의 SiC 첨가는 Si3N4의 입성장을 효과적으로 억제하여 미세한 $\beta$-Si3N4의 grain을 형성함을 관찰하였다. 초미립 SiC첨가를 통한 복합체의 강도 증진은 상대적으로 $\beta$-Si3N4입자의 미세화에 의한 인성의 저하를 유도하나 SiC platelet을 첨가하여 급격한 강도 저하 없이 높은 인성을 갖는 하이브리드 복합체를 제조할 수 있었으며 SiC/Si3N4 하이브리드 복합체의 인성증진은 elongated $\beta$-Si3N4와 platelet SiC의 debonding에 의한 grain pull-out 영향임을 알 수 있었다.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.145.2-145.2
• /
• 2011

We present the results of simultaneous observations of SiO v = 1, 2, J = 1-0, $^{29}SiO$ v = 0, J = 1-0, and $H_2O$ $6_{16}-5_{23}$ maser lines toward 152 known $H_2O$-only maser sources (the sources which are previously detected only in the 22 GHz $H_2O$ maser emission) using Yonsei and Tamna 21-m radio telescopes of the Korean VLBI Network from 2009 June to 2011 January. Both SiO and $H_2O$ maser emission were detected from 62 sources giving a detection rate of 40.8 %. SiO-only maser emission was detected from 27 sources, while $H_2O$-only maser was detected from 22 sources. We have identified 19 new detections of SiO maser emission for previous non-detection sources and 51 new detections of SiO maser for previously not observed sources. Characteristics of all observed sources in the IRAS two-color diagram is investigated including their evolutionary sequence and mutual relations between SiO and $H_2O$ maser emission. These observational results will be useful for statistical study of asymptotic giant branch (AGB) stars and future VLBI observation.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.234-236
• /
• 1993

Dielectric properties of low viscous silicone oils have been investigated as a function of frequency and The increase of polymerization degree was attributed to presence of Si-O-Si bonds and their increased dissociation factor. The application of the Clausius-Mosotti equation on the low viscous silicone oils, it has been previously assumed that the oils were dilute solutions of polar molecules. In the silicone oil the Si-o and O-Si bonds give dipole polarization. Simple relations have been found which dipole moment and activation energy as a function of number of Si atoms in the low viscous silicone oils.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.376-380
• /
• 2003

The microstructure and the mechanical properties of RS-SiC and RS-$SiC_f/SiC$ materials have been investigated in conjunction with the content of residual silicon and porosity. The mechanical properties of RS-SiC materials suffered from the thermal exposure were also examined. RS-SiC based materials bave been fabricated using the complex matrix slurry with different composition ratios of SiC and C panicles. The characterization of RS-SiC based materials was investigated by means of SEM, EDS ~d three point bending test. Based on the mechanical property-microstructure correlation, the high temperature applicability of RS-SiC based materials was discussed.

• Journal of the Korean Vacuum Society
• /
• v.21 no.2
• /
• pp.99-105
• /
• 2012

We fabricated the textured silicon (Si) surface on Si substrates by the electrochemical etching using gold (Au) nanoparticle catalysts. The antireflective property of the fabricated Si nanostructures was improved. The Au nanoparticles of ~20-150 nm were formed by the rapid thermal annealing using thermally evaporated Au films on Si. In the chemical etching, the aqueous solution containing $H_2O_2$ and HF was used. In order to investigate the effect of electrochemical etching on the etching depth and reflectance characteristics, the sample was immersed in the aqueous etching solution for 1 min with and without applied cathodic voltages of -1 V and -2 V. As a result, the solar weighted reflectance, i.e., the averaged reflectance with considering solar spectrum (air mass 1.5), could be efficiently reduced for the electrochemically etched Si by applying the cathodic voltage of -2 V, which is expected to be useful for Si solar cell applications.