• Nano
• /
• v.13 no.12
• /
• pp.1850137.1-1850137.9
• /
• 2018

A series of silica surface-capped with hexamethyldisilazane (denoted as $H-SiO_2$) were prepared by liquid-phase in-situ surface-modification method. The as-obtained $H-SiO_2$ was incorporated into acrylic amino (AA) baking paint to obtain AA/$H-SiO_2$ composite extinction paints and/or coatings. $N_2$ adsorption-desorption tests were conducted to determine the specific surface area as well as pore size and pore volume of $H-SiO_2$. Moreover, the effects of $H-SiO_2$ matting agents on the physical properties of AA paint as well as the gloss and transmittance of AA-based composite extinction coatings were investigated. Results show that $H-SiO_2$ matting agents possess a large specific surface area and pore volume than previously reported silica obtained by liquid-phase method. Besides, they have better dispersibility in AA baking paint than the unmodified silica. Particularly, $H-SiO_2$ with a silica particle size of $6.7{\mu}m$ and the dosage of 4% (mass fraction) provides an extinction rate of 95.2% and a transmittance of 79.3% for the AA-based composite extinction coating, showing advantages over OK520, a conventional silica matting agent. Along with the increase in the silica particle size, $H-SiO_2$ matting agents cause a certain degree of increase in the viscosity of AA paint as well as a noticeable decrease in the gloss of the AA-based composite extinction coating, but they have insignificant effects on the hardness and adhesion to substrate of the AA-based composite coatings. This means that $H-SiO_2$ matting agents could be well applicable to preparing low-viscosity and low-gloss AA-based matte coatings.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.40.3-41
• /
• 2015

We performed simultaneous observations of H2O and SiO masers toward VX Sgr using the Korean VLBI Network (KVN) and Source Frequency Phase Referencing (SFPR) method. The observations were carried out at 5 epochs from 2014 February to 2015 June. The relative locations of the SiO with respect to the H2O maser emission were determined at two epochs by SFPR for the first time. The H2O masers show well developed asymmetric outflow features which are spread up to ~300 mas in diameter. On the other hand, the SiO masers show a ring-like structure close to the central star with ~ 30 mas diameter. The SFPR observational results at two epochs (${\varphi}=0.83$ and 0.99) provide similar relative locations of H2O and SiO maser features. These superposed maps of H2O and SiO masers lead us to investigate the development of outflow motions from relatively spherical SiO maser regions close to central star to aspherical H2O maser regions according to optical phase of stellar pulsation together with the prediction of the position of central star.

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.425-428
• /
• 2009

We performed a density functional theory study to investigate the interaction of DEMS (diethoxymethylsilane) with the H-terminated Si (001) surface. The optimum structure of DEMS was first calculated by a first principles study. The dissociation probability of the O-C bond of DEMS was higher than the other seven bonds based on the bond energy calculation. When the fragmented DEMS groups reacted with the H-terminated Si (001) surface, it was the most favorable among the eight reactions to form a bond between the Si atom on the surface and the O atom of a fragmented DEMS group (($C_2H_5O$)Si($CH_3$)(H)-O-) by forming a $C_2H_6$ as by-product.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.87-90
• /
• 2000

Poly(HEMA)s have been used as the optometric material for the preparation of soft contact lens. The bulk thermal polymerization of 2-hydroxyethyl methacrylate (HEMA) with various hydrosilanes such as $phSiH_3$, $phMeSiH_2$, and $ph2SiH_2$ were performed to produce poly(HEMA)s containing phenylsilyl end moeity. It was found for thermal polymerization that while the polymerization yield and polymer molcular weights decreased as the relative phenylsilane concentration increases, the TGA residue yields and the relative intensities of SiH IR stretching bands increased as the relative hydrosilane concentration increases over HEMA. The polymerization yield, molecular weight, and TGA residue for the thermal polymerization were higher than those for the photo polymerization. Thus, the hydrosilanes significantly influence on the polymerization as both chain-initiation and chain-transfer agents.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.7
• /
• pp.481-485
• /
• 2003

Amorphous silicon (a-Si:H) based TFT process has been studied at the maximum temperature of 15$0^{\circ}C$ with 25${\mu}{\textrm}{m}$ thick flexible and adhesive tape type polyimide foil substrate, which has benefit on handling a rugged, flexible plastic substrate trough sticking simply it to glass. This paper summarize the process procedure of the TFT on the plastic substrate and shows its electrical characteristics in comparison with glass substrate using primarily the ON/OFF current ratio and the field effect mobility as the quality criterion. The a-SiN:H coating layer played an important role in decreasing surface roughness of plastic substrate, so leakage current of TFT was decreased and mobility was increased. The results show that high quality a-Si:H TFTs can be fabricated on the plastic substrates through coating a rough plastic surface with a-SiN:H.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.1-5
• /
• 2009

Analytical expressions for breakdown voltage and specific on-resistance of 6H-SiC PN diodes have been derived successfully by extracting an effective ionization coefficient from ionization coefficients for electron and hole in 6H-SiC. The breakdown voltages induced from our analytical model are compared with experimental results. The variation of specific on-resistance as a function of doping concentration is also compared with the one reported previously. Good fits with experimental results are found for the breakdown voltage within 10% in error for the doping concentration in the range of $10^{15}{\sim}10^{18}cm^{-3}$. The analytic results show good agreement with the numerical data for the specific on-resistance in the region of $5{\times}10^{15}{\sim}10^{16}cm^{-3}$.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.237.1-237.1
• /
• 2012

We report extensive statistical analyses based on the simultaneous observational results of SiO and $H_2O$ masers toward 166 known both SiO and $H_2O$ maser sources (Kim et al. 2010), 83 known SiO maser sources (Cho & Kim 2012 submitted), and 152 known $H_2O$ maser sources (Kim et al. 2012 in preparation). We investigate mutual relations between SiO and $H_2O$ maser properties (peak and total flux density ratios, full line width ratios, and velocity structures etc.) according to stellar pulsation phases and type of evolved stars. These statistical results are compared with monitoring observational results of some individual stars. In addition, a relation between the full line width of SiO/$H_2O$ masers and stellar mass loss rates is examined. For 401 observed stars, we also investigate characteristics of SiO and $H_2O$ maser properties related with evolutionary stages in the IRAS two-color diagram.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.89-90
• /
• 2007

This paper presents the mechanical properties of 3C-SiC thin film according to 0, 7, and 10% carrier gas $(H_2)$ concentrations using Nano Indentation. When carrier gas $(H_2)$ concentration was 10%, it has been proved that the mechanical properties, elastic modulus and hardness, of 3C-SiC are the best of them. In the case of 10% carrier gas concentration, Young's modulus and Hardness were obtained as 367 GPa and 36 GPa, respectively. When the surface roughness according to $H_2$ concentrations was investigated by AFM (atomic force microscope), when $H_2$ concentration was 10%, the roughness of 3C-SiC thin was 9.92 nm, which is also the best of them. Therefore, in order to apply poly 3C-SiC thin film to MEMS applications, $H_2$ concentration's rate should increase to obtain better mechanical properties and surface roughness.

• Applied Chemistry for Engineering
• /
• v.4 no.2
• /
• pp.291-299
• /
• 1993

Hydrothermal synthesis of 1.13nm tobermorite was performed to obtain the mixing ratio of raw materials, the optimum reaction time and the effect of aluminum in two systems, $CaO-SiO_2-H_2O$ and cement sludge-$SiO_2-H_2O$. 1.13nm tobermorite($5CaO{\cdot}6SiO_2{\cdot}5H_2O:C_5S_6H_5$) was synthesized excellently from $CaO-SiO_2-H_2O$ system on each mole ratio (0.4, 0.8) of $CaO/SiO_2$ at $180^{\circ}C$. But a tobermorite crystals had a sign of crystal conversion after 6 hours of reaction times in the case of $CaO/SiO_2=0.4$ and 4 hours of reaction time in the case of $CaO/SiO_2=0.8$. However, a tobermorite synthesized from cement sludge wastes did not show the crystal conversion on each mole ratio(0.4, 0.8) of $CaO/SiO_2$ within 10 hours of reaction times. It is considered that aluminum ions dissolved from cement sludge wastes retarded the recrystallization of tobermorite. This role of aluminum ion was confirmed in $CaO-SiO_2-H_2O+Al$ powder system. According as added amount of Al powder was increased from 0.8% to 3.0%, the crystal had a highly flatter and larger shape. Recrvstallization was not detected within the same reaction times when aluminum was added.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.570-574
• /
• 2011

Large colorless single crystals of analcime with diameters up to 0.20 mm have been synthesized from gels with the composition of $3.00SiO_2$ : $1.50NaAlO_2$ : 8.02NaOH : $454H_2O$ : 5.00TEA. The fully $Na^+$-exchanged analcime have been prepared with aqueous 0.1 M NaCl (pH adjusted from 6 to 11 by dropwise addition of NaOH). The single-crystal structure of hydrated $|Na_{0.94}(H_2O)|[Si_{2.06}Al_{0.94}O_6]$-ANA per unit cell, a=13.703(3) ${\AA}$, has been determined by single-crystal X-ray diffraction technique in the orthorhombic space group Ibca at 294 K. The structure was refined using all intenties to the final error indices (using only the 1,446 reflections for which $F_o$ > $4{\sigma}(F_o))R_1/wR_2$ = 0.054/0.143. About 15 $Na^+$ ions are located at three nonequivalent positions and octahedrally coordinated. The chemical composition is $Na_{0.94}(H_2O)Si_{2.06}Al_{0.94}O_6$. The Si/Al ratio of synthetic analcime is 2.19 determined by the occupations of cations, 14.79, in the single-crystal determination work.