• Journal of the Semiconductor & Display Technology
• /
• v.14 no.1
• /
• pp.27-30
• /
• 2015

SiC based Schottky barrier diodes were prepared by using the facing targets sputtering method. In this research, 4H-SiC polytypes of SiC were adopted and Molybdenum, Titanium was employed as the Schottky metal of the metal-semiconductor contacts. Both structures showed the rectifying nature in their forward and reverse J-V characteristic curve and the ideality factors calculated from these plots that were close to unity were represented the nearly ideal behavior. Difference of Schottky barrier height between prepared devices was also corresponding with the electrical characteristics of themselves. Therefore the suitability of the facing targets sputtering method for fabrication of Schottky diodes could be suggested from these results.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.05a
• /
• pp.40-40
• /
• 1999

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.7
• /
• pp.388-393
• /
• 2000

Hydrogen-sensing behaviors of Pd- and Pt-SiC Schottky diodes, fabricated on the same SiC substrate, have been systematically compared and analyzed as a function of hydrogen concentration and temperature by I-V and$\DeltaI-t$ methods under steady-state and transient conditions. The effects of hydrogen adsorption on the device parameters such as the barrier height are investigated. The significant differences in their hydrogen sensing characteristics have been examined in terms of sensitivity limit, linearity of response, response rate, and response time. For the investigated temperature range, Pd-SiC Schottky diode shows better performance for H2 detection than Pt-SiC Schottky diode under the same testing conditions. The physical and chemical mechanisms responsible for hydrogen detection are discussed. Analysis of the steady-state reaction kinetics using I-V method confirmed that the atomistic hydrogen process is responsible for the barrier height change in the diodes.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.123-126
• /
• 2022

We investigated deep levels in n-type 4H-SiC epitaxy layer of the Positive-Intrinsic-Negative diode and Schottky barrier diodes by using deep level transient spectroscopy. Despite the excellent performance of 4H-SiC, research on various deep level defects still requires a lot of research to improve device performance. In Positive-Intrinsic-Negative diode, two defects of 196K and 628K are observed more than Schottky barrier diode. This is related to the action of impurity atoms infiltrating or occupying the 4H-SiC lattice in the ion implantation process. The I-V characteristics of the Positive-Intrinsic-Negative diode shows about ~100 times lower the leakage current level than Schottky barrier diode due to the grid structures in Positive-Intrinsic-Negative. As a result of comparing the capacitance of devices diode and Schottky barrier diode devices, it can be seen that the capacitance value lowered if it exists the P implantation regions from C-V characteristics.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.214-219
• /
• 2014

In this paper, the usage of tilt-implanted trench Schottky diode(TITSD) based on silicon carbide is proposed. A tilt-implanted trench termination technique modified for SiC is proposed as a method to keep all the potentials confined in the trench insulator when reverse blocking mode is operated. With the side wall doping concentration of $1{\times}10^{19}cm^{-3}$ nitrogen, the termination area of the TITSD is reduced without any sacrifice in breakdown voltage while potential is confined within insulator. When the trench depth is set to 11um and the width is optimized, a breakdown voltage of 2750V is obtained and termination area is 38.7% smaller than that of other devices which use guard rings for the same breakdown voltage. A Sentaurus device simulator is used to analyze the characteristics of the TITSD. The performance of the TITSD is compared to the conventional trench Schottky diode.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.4
• /
• pp.199-202
• /
• 2014

The effect of neutron irradiation on the properties of SiC Schottky Diode has been investigated. SiC Schottky diodes were irradiated under neutron fluences and compared to the reference samples to study the radiation-induced changes in device properties. The condition of neutron irradiation was $3.1{\times}10^{10}$ $n/cm^2$. The current density after irradiation decreased from 12.7 to 0.75 $A/cm^2$. Also, a slight positive shift (${\Delta}V_{th}$= 0.15 V) in threshold voltage from 0.53 to 0.68 V and a positive change (${\Delta}{\Phi}_B$= 0.16 eV) of barrier height from 0.89 to 1.05 eV have been observed by the neutron irradiation, which is attributed to charge damage in the interface between the metal and the SiC layer.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.68-68
• /
• 2003

SiC는 wide bandgap 물질로서 그 material properties로 인하여, high tmperature, high power, high frequency영역으로의 사용이 기대되는 물질이다. 따라서 SiC에 대한 기본적인 연구와 더불어, 그 소자 제작 및 응용에의 연구가 절실한 시점이다. 이에, SiC 기본적인 소자중 하나인 Schottky diode에 대해 연구하였다. 본 논문은 Schottky contact 물질로써 현재까지 연구가 미비한 Ru을 사용하였다. Ru은 Pt 계열물질로써, 다른 metal에 비하여 열역학적으로 안정하며, 또한 그의 산소 화합물인 RuO2는 다른 oxide에 비하여 전도성 이 높은 장점을 가지고 있다. 따라서 Ru-SiC diode는 이러한 측면에서 연구할 만한 가치가 있다.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.92-94
• /
• 2004

In this investigation, 3C-SiC film deposited $1000{\AA}$ on the p-type silicon wafer which is resistance $0{\sim}30[{\Omega}{\cdot}cm]$ by PECVD (Plasma-enhanced Chemical Vapor Deposition). We deposited Cr, Ta, Pt in front of wafer to utilize DC-sputter for $500{\AA}$, the SiC Schottky diode made from Al ohmic contact about $4000{\AA}$, and to each different temperature which annealing in Ar atmosphere, we had forward characteristic analysis along to annealing temperature.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.90-92
• /
• 2001

Carbon monoxide-sensing behavior of Pt-SiC Schottky diodes. fabricated on the same SiC substrate have been systematically compared and analyzed as a function of carbon monoxide concentrati on and temperature by I-V and ${\Delta}I$-t methods under steady-state and transient condition. Adsorption activation energies of Carbon monoxide on the surface of Pt-SiC Schottky diodes is investigated in a high temperature range ($100{\sim}500^{\circ}C$). The optimal temperature for behavior sensing is $300^{\circ}C$ and saturation concentration is 200 ppm.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.3
• /
• pp.111-116
• /
• 2004

The Ni/SiC Schottky diode was fabricated with the $\alpha$-SiC thin film grown by the ICP-CVD method on a (111) Si wafer. $\alpha$-SiC film has been grown on a carbonized Si layer in which the Si surface was chemically converted to a very thin SiC layer achieved using an ICP-CVD method at $700^{\circ}C$. To reduce defects between the Si and $\alpha$-SiC, the surface of the Si wafer was slightly carbonized. The film characteristics of $\alpha$-SiC were investigated by employing TEM (Transmission Electron Microscopy) and FT-IR (Fourier Transform Infrared Spectroscopy). Sputterd Ni thin film was used as the anode metal. The boundary status of the Ni/SiC contact was investigated by AES (Auger Electron Spectroscopy) as a function of the annealing temperature. It is shown that the ohmic contact could be acquired beyond a 100$0^{\circ}C$ annealing temperature. The forward voltage drop at 100A/cm was I.0V. The breakdown voltage of the Ni/$\alpha$-SiC Schottky diode was 545 V, which is five times larger than the ideal breakdown voltage of the silicon device. As well, the dependence of barrier height on temperature was observed. The barrier height from C- V characteristics was higher than those from I-V.