Electrical Characteristics of the SiC SBD Prepared by using the Facing Targets Sputtering Method

대향 타겟 스퍼터링법으로 제작한 SiC SBD의 전기적 특성

  • Received : 2015.02.26
  • Accepted : 2015.03.23
  • Published : 2015.03.31

Abstract

SiC based Schottky barrier diodes were prepared by using the facing targets sputtering method. In this research, 4H-SiC polytypes of SiC were adopted and Molybdenum, Titanium was employed as the Schottky metal of the metal-semiconductor contacts. Both structures showed the rectifying nature in their forward and reverse J-V characteristic curve and the ideality factors calculated from these plots that were close to unity were represented the nearly ideal behavior. Difference of Schottky barrier height between prepared devices was also corresponding with the electrical characteristics of themselves. Therefore the suitability of the facing targets sputtering method for fabrication of Schottky diodes could be suggested from these results.

Keywords

References

  1. S. K. Gupta, A. Azam, and J. Akhtar, "Improved electrical parameters of vacuum annealed Ni/4H-SiC (0001) Schottky barrier diode," Phys. B Condens. Matter, vol. 406, no. 15-16, pp. 3030-3035, 2011. https://doi.org/10.1016/j.physb.2011.05.001
  2. K. V. Vassilevski, I. P. Nikitina, P. Bhatnagar, A. B. Horsfall, N. G. Wright, A. G. O'Neill, M. J. Uren, K. P. Hilton, A. G. Munday, A. J. Hydes, and C. M. M. Johnson, "High Temperature Operation of Silicon Carbide Schottky Diodes with Recoverable Avalanche Breakdown," Materials Science Forum, vol. 527-529, no. 1. pp. 931-934, 2006. https://doi.org/10.4028/www.scientific.net/MSF.527-529.931
  3. A. Itoh, T. Kimoto, and H. Matsunami, "High performance of high-voltage 4H-SiC Schottky barrier diodes," IEEE Electron Device Lett., vol. 16, no. 6, pp. 280-282, 1995. https://doi.org/10.1109/55.790735
  4. B. J. Baliga, Advanced Power Rectifier Concepts. Boston, MA: Springer US, 2009.
  5. B. J. Baliga, Fundamentals of Power Semiconductor Devices. Boston, MA: Springer US, 2008.
  6. K. H. Kim, I. H. Son, K. B. Song, S. H. Kong, M. J. Keum, S. Nakagawa, and M. Naoe, "Thin film properties by facing targets sputtering system," Appl. Surf. Sci., vol. 169-170, pp. 410-414, 2001. https://doi.org/10.1016/S0169-4332(00)00694-2
  7. J. S. Hong and K. H. Kim, "The Performance of IZO Thin Film with Substrate Temperature for OLED Anode," Journal of the Semiconductor & Display Equipment Technology, vol. 8, no. 3, pp. 51-55, 2009.
  8. S. K. Cheung and N. W. Cheung, "Extraction of Schottky diode parameters from forward current-voltage characteristics," Appl. Phys. Lett., vol. 49, no. 2, p. 85, 1986. https://doi.org/10.1063/1.97359
  9. F. Roccaforte, F. La Via, V. Raineri, R. Pierobon, and E. Zanoni, "Richardson's constant in inhomogeneous silicon carbide Schottky contacts," J. Appl. Phys., vol. 93, no. 11, p. 9137, 2003. https://doi.org/10.1063/1.1573750
  10. H. Norde, "A modified forward I-V plot for Schottky diodes with high series resistance," J. Appl. Phys., vol. 50, no. 7, p. 5052, 1979. https://doi.org/10.1063/1.325607
  11. K. E. Bohlin, "Generalized Norde plot including determination of the ideality factor," J. Appl. Phys., vol. 60, no. 3, p. 1223, 1986. https://doi.org/10.1063/1.337372
  12. L. Boussouar, Z. Ouennoughi, N. Rouag, A. Sellai, R. Weiss, and H. Ryssel, "Investigation of barrier inhomogeneities in Mo/4H-SiC Schottky diodes," Microelectron. Eng., vol. 88, no. 6, pp. 969-975, 2011. https://doi.org/10.1016/j.mee.2010.12.070
  13. T. Nakamura, T. Miyanagi, I. Kamata, T. Jikimoto, and H. Tsuchida, "A 4.15 kV $9.07-m{\Omega}{\cdot}cm^2$ 4H-SiC Schottky-barrier diode using Mo contact annealed at high temperature," IEEE Electron Device Lett., vol. 26, no. 2, pp. 99-101, 2005. https://doi.org/10.1109/LED.2004.841473
  14. K. J. Schoen, J. P. Henning, J. M. Woodall, J. A. Cooper, and M. R. Melloch, "A dual-metal-trench Schottky pinch-rectifier in 4H-SiC," IEEE Electron Device Lett., vol. 19, no. 4, pp. 97-99, 1998. https://doi.org/10.1109/55.663526