• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.10a
• /
• pp.73-73
• /
• 2017

Pyroprocessing at KAERI (Korea Atomic Energy Research Institute) consists of pretreatment, electroreduction, electrorefining and electrowinning. SFR (Sodium Fast Reactor) fuel is prepared from the electrowinning process which is composed of LCC (Liquid Cadmium Process) and Cd distillation et al. LCC is an electrochemical process to obtain actinides from spent fuel. In order to recover actinides inert anodes such as carbon material are used, where chlorine gas ($Cl_2$) evolves on the surface of the carbon material. And, stainless steel (SUS) crucible should be installed in large-scale electrowinning system. Therefore, the effect of chlorine on the SUS material needs to be studied. LiCl-KCl-$UCl_3$-$NdCl_3$-$CeCl_3$-$LaCl_3$-$YCl_3$ salt was contained in 2 kinds of electrolytic crucible having an inner diameter of 5cm, made of an insulated alumina and an SUS, respectively. And, three kinds of electrodes such as cathode, anode, reference were used for the electrochemical experiments. Both solid tungsten (W) and LCC were used as cathodes. Cd of 45 g as the cathode material was contained in alumina crucibles for the deposition experiments, where the crucible has an inner diameter of 3 cm. Glassy carbon rod with the diameter of 0.3 cm was employed as an anode, where shroud was not used for the anode. A pyrex tube containing LiCl-KCl-1mol% AgCl and silver (Ag) wire having a diameter of 0.1cm was used as a reference electrode. Electrodeposition experiments were conducted at $500^{\circ}C$ at the current densities of $50{\sim}100mA/cm^2$. In conclusion, Fe ions were produced in the salt during the electrodeposition by the reaction of chlorine evolved from the anode and Fe of the SUS crucible and thereby LCC system using SUS crucible showed very low current efficiencies compared with the system using the insulated alumina crucible. Anode shroud needs to be installed around the glassy carbon not to influence surrounding SUS material.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.5
• /
• pp.342-351
• /
• 2014

The present paper investigates the performance of direct wet mineral carbonation technology to fix carbon dioxide ($CO_2$) from relatively high $CO_2$ concentration feeding gas using wollastonite ($CaSiO_3$)-water (and 0.46 M acetic acid) suspension solution. To minimize the energy consumed on the process, the carbonation in this work is carried out at atmospheric pressure and slightly higher room temperature. As a result, carbon fixation is confirmed on the surface of $CaSiO_3$ after carbonation with wollastonite-water suspension solution and its amount is increased according to the $CO_2$ composition in the feeding gas. The leaching and carbonation ratio of wollastonite-water suspension system obtained from the carbonation with 50% of $CO_2$ composition feeding gas is 13.2% and 10.4%, respectively. On the other hand, the performance of wollastonite-acetic acid in the same condition is 63% for leaching and 1.39% for carbonation.

• Economic and Environmental Geology
• /
• v.25 no.3
• /
• pp.259-273
• /
• 1992

The Seongsan mine is one of the largest dickite deposits in the southwestern part of the Korean Peninsula. The main constithent minerals of the ore are dickite and quartz with accessory alunite, kaolinite and sericite. The geology around the Seongsan mine consists mainly of the late Cretaceous felsic volcanic rocks. In the studied area, these rocks make a synclinal structure with an axis of E-W direction plunging to the east. Most of the felsic volcanic rocks have undergone extensive hydrothermal alteration. The hydrothermally altered rocks can be classified into the following zones: Dickite, Dickite-Quartz, Quartz, Sericite, Albite and Chlorite zones, from the center to the margin of the alteration mass. Such zonal arrangement of altered rocks suggests that the country rocks, most of which are upper part of the rhyolite and welded tuff, were altered by strongly acid hydrothermal solutions. It is reasonable to consider that initial gas and solution containing $H_2S$ and other compounds were oxidized near the surface, and formed hydrothermal sulfuric acid solutions. The mineralogical and chemical changes of the altered rocks were investigated using various methods, and chemical composition of fifty-six samples of the altered rocks were obtained by wet chemical analysis and X.R.F. methods. On the basis of these analyses, it was found that some components such as $SiO_2$, $Al_2O_3$, $Fe_2O_3$, CaO, MgO, $K_2O$, $Na_2O$ and $TiO_2$ were mobilized considerably from the original rocks. The formation temperature of the deposits was estimated as higher than $200^{\circ}C$ from fluid inclusion study of samples taken from the Quartz zone. On the basis of the chemical composition data on rocks and minerals and estimated temperatures, the hydrothermal solutions responsible for the formation of the Seongsan dickite deposits were estimated to have the composition: $m_{K^+}=0.003$, $m_{Na^+}=0.097$, $m_{SiO_2(aq.)}=0.008$ and pH=5.0, here "m" represents the molality (mole/kg $H_2O$).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.2
• /
• pp.126-135
• /
• 1987

The physical properties, coliform groups, and nutrients were investigated to evaluate the sanitary Quality of the environmental water at Chinju area from May to October, 1986. The results were as follows : The pH ranged from 5.4 to 7.8 : water temperature ranged from 12.0 to $30.3^{\circ}C$ : electrical conductivity ranged from $0.51\times10^2\;to\;8.095\times10^2\mu\mho/cm$; chloride ion ranged from 3.6 to 126.8 mg/l, respectively. Especially, the concentration of the chloride ion at St.9 was 109mg/l which was higher than those of others. The $NO_3^--N$ ranged from 0.2336 to 14.1648 mg/l and the mean value was 5.4774 mg/l, the concentration of $NO_3^--N$ at St. 2 was higher as 40 times than that of St.4. The $PO_4^{3-}-P$ ranged from 0.0013 to 0.8315 mg/l, and the mean value was 0.0745 mg/l, the concentration of$PO_4^{3-}-P$ at St.8 was higher than that of others. The $SiO_2-Si$ ranged 1.7 to 15.28 mg/1 and the mean value was 5.81 mg/l. The value of St.8 and St.9 were higher than those of other stations but this value were lower $10\~13\;mg/l$ than the criterion for drinking water as 50 mg/l. The bacterial density of the spring waters ranged 9.1 to 4,600/100 ml (geometric mean : 205/100 ml) for total coliform 0 to 4s0/100 ml and 28.2/100 ml for fecal coliform. Composition of coliform was $38.2\%$ Escherichia coli, $25\%$ Entrobacter aerogenes, $13.2\%$ Citrobecter freundii and the others.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.515-524
• /
• 2019

The purpose of this study is to investigate the effects of artificial disturbance by analyzing and comparing the survey data of the Yeongju dam located in Yeongju-si, Gyeongbuk before and after impoundment. We surveyed four sites between the downstream of sediment control to the downstream of Yeongju Dam four times between April and October 2018. The macroinvertebrate data before the survey were gathered from the literature. The total number of benthic macroinvertebrates we observed was $35,037ind./m^2$, including 77 species, 48 families, 14 orders, 7 classes, and 3 phyla. The result of the community analysis showed that the dominant index increased from 0.44(${\pm}0.11$) before impoundment to 0.62(${\pm}0.16$) after impoundment. The diversity index increased from 2.26(${\pm}0.30$) to 1.75(${\pm}0.45$), the evenness index from 0.75(${\pm}0.10$) to 0.66(${\pm}0.14$), and the richness index from 3.11(${\pm}0.98$) to 2.25(${\pm}0.81$). The most dominant species changed from Hydropsychidae spp. to Chironomidae sp. The result of the Principal Components Analysis (PCA) based on Axis 1 showed that the sites of 2014 and Hydropsychidae spp. had a negative value, while the sites of 2018 and Chironomidae sp. had a positive value. In all study sites, the dominance increased while the diversity decreased. The community change was the largest in St. 2. The results of the functional group analysis showed that the scrapers increased while gathering-collectors increased among the functional feeding group and that the clingers decreased while borrows increased among the habitat oriented group. The Benthic Macroinvertebrate Streambed Index (BMSI) decreased from an average of 57.1(${\pm}8.0$, C class) to an average of 30.0(${\pm}12.1$, C class). St. 3 and St. 4, in particular, showed a high reduction rate.

• Ocean and Polar Research
• /
• v.27 no.1
• /
• pp.15-24
• /
• 2005

In order to investigate the structures and dynamics of phytoplankton communities, each physicochemical environmental factor, species composition, standing crop, and dominant species were examined in the marine ranching ground of Tongyeong coastal waters from April to October, 2000. During the studies, mean water temperature and salinity were $18.8^{\circ}C$ and 33.1 psu, respectively. DO, SS and transparency varied from 5.43 to 11.39 mg/l, 14.6 to 32.4mg/l and 3.5 to 9.0m, respectively. Light intensities varied from 0.02 to $966{\mu}E/m^2/s$, which decreased with depth. $NH_4-N,\;NO_3-N,\;NO_2-N,\;PO_4-P,\;and\;SiO_2-Si$ were fluctuated from 0.059 to 0.332 mg/l, 0.040 to 0.800 mg/l, 0.001 to 0.468 mg/l, 2.3 to $143.0{\mu}g/l$, and 0.007 to 0.600 mg/l, respectively. chlorophyll a concentrations were fluctuated from 0.7 to $8.9{\mu}g/l$. Among 130 taxa of phytoplankton communities observed. diatoms occupied more than 81.54% of the total species, and the others were dinoflagellates and silicoflagellates. Phytoplankton standing crops ranged from $4.6{\times}10^4\;to\;2.6{\times}10^6cells/l$. In October, the standing crops were at bloom level showing more than $10^6cells/lat$ all stations. Dominant species changed by month and station. Leptocylindrus danicus occupied 59.84% in April and 22.03% in June. Pseudo-nitzschia pungens in August and Chaetoceros socialis and Skeletonema costatum in October were predominant species. In order to investigate factors influencing the total phytoplankton standing crops the correlations between the standing crops of diatoms, dinoflagellates, all phytoplanktons occurred and environmental factors were calculated using a multiple regression analysis. The coefficient of determination $(R^2)$ for total standing crops was 0.63 which explained 63% of variance and that of $R^2$ for diatom was 0.82. In statistical analysis, the results showed that the environmental factors influencing the size of the communities were predominantly water temperature, salinity and silicate.

• Korean Journal of Materials Research
• /
• v.28 no.11
• /
• pp.659-662
• /
• 2018

We report the properties of infrared photodetectors based on two kinds of quantum dots(QDs): i) 2.0 ML InAs QDs by the Stranski-Krastanov growth mode(SK QDs) and ii) sub-monolayer QDs by $4{\times}[0.3ML/1nm\;In_{0.15}Ga_{0.85}As]$ deposition(SML QDs). The QD infrared photodetector(QDIP) structure of $n^+-n^-(QDs)-n^+$ is epitaxially grown on GaAs (100) wafers using molecular-beam epitaxy. Both the bottom and top contact GaAs layers are Si doped at $2{\times}10^{18}/cm^3$. The QD layers are grown with Si doping of $2{\times}10^{17}/cm^3$ and capped by an $In_{0.15}Ga_{0.85}As$ layer at $495^{\circ}C$. The photoluminescence peak(1.24 eV) of the SML QDIP is blue-shifted with respect to that (1.04 eV) of SK QDIPs, suggesting that the electron ground state of SML QDIP is higher than that of the SK QDIP. As a result, the photoresponse regime(${\sim}9-14{\mu}m$) of the SML QDIP is longer than that (${\sim}6-12{\mu}m$) of the SK QDIP. The dark current of the SML QDIP is two orders of magnitude smaller value than that of the SK QDIP because of the inserted $Al_{0.08}Ga_{0.92}As$ layer.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2251-2253
• /
• 2000

MEMS기술을 이용하여 단층 실리콘 나이트라이드($Si_{3}N_4$) 다이아프램을 제조하고, 이 다이아프램상에 저항성 가열 진공증착법과 고주파 마그네트론 스퍼터링법을 이용하여 차례로 In막과 ZnO막을 증착하고, In의 도핑을 위해 열처리하여 $NH_3$ 가스 감지용 마이크로센서를 제작하였다. 감지막의 열처리온도에 따른 구조적 및 전기적 특성은 XRD, SEM, AFM, 4-point probe 및 Electrometer를 통하여 각각 조사하였다. 제작된 센서의 열처리온도와 인가전력에 따라 $NH_3$ 가스에 대한 감도, 선택성 및 시간응답 특성을 조사하였다. 감지막 두께 3000 ${\AA}$, 열처리온도 400$^{\circ}C$로 제조된 마이크로 센서가 히터 인가전력 366 mW에서 100 ppm의 $NH_3$ 가스농도에서 대하여 16 %, 350 ppm의 가스농도에서 대하여 23 %의 가장 우수한 감도를 나타내었다. 그러나 CO 가스 및 $NO_x$ 가스에 대한 감지특성은 관찰되지 않았다.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.436-441
• /
• 2011

Metal coating with several nanometer thickness was applied on the carbon nanotubes (CNTs) in order to improve electron emission characteristics and emission reliability for the potential applications in the area of various electron sources and displays. CNTs were grown on the 2-nm thick Invar (52% Fe, 42% Ni, 6% Co alloy)-catalized Si substrate by using plasma-enhanced chemical vapor deposition at $450^{\circ}C$. In order to reduce the spatial density of densely packed CNTs, as-grown CNTs were partly etched back by $N_2$ plasma and subsequently coated with 5~150 nm thick Ti by a sputtering method. 5 nm thick Ti-coated CNTs produced four times higher emission current density at the electric field of 6 V/${\mu}m$ and much lower emission current fluctuation, compared with the as-grown CNTs. These improved emission properties are mainly due to not only the work function of Ti (4.3 eV) lower than that of pristine CNTs (5 eV), but also lower contact resistance and better adhesion between CNT emitters and substrate accomplished by Ti coating.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.681-682
• /
• 2013

전기는 우리 주변의 에너지 형태 중에서 가장 편리하고 광범위하게 사용되고 있다. 이러한 전기는 전자제품, 전기자동차, 에너지 저장 플랜트 등 매우 많은 분야에서 저장되고 사용되고 있다. 특히 에너지 저장 용량의 확대는 휴대폰, 노트북 PC 등 휴대용 IT 기기의 성장에 결정적인 역할을 하였다. 가볍고 작으면서도 고용량의 전기 에너지 저장 장치가 없었다면, 통신이나 인터넷 그리고 오락 등 다양한 기능을 작은 휴대용 기기에 구현할 수 없었을 것이다. 그러나 시간이 흐를수록 기기의 요구 성능이 높아지고 소비자의 니즈가 더욱더 다양해지고 고도화될수록 단일 부품으로 가장 큰 부피를 차지하는 에너지 저장 장치의 용량과 디자인은 점점 중요해지고 있다. 이러한 에너지 저장 장치에서 가장 친숙한 형태는 2차 전지 계열이다. 납 축전지를 비롯하여, 니켈수소, 니켈카드뮴, electrochemical capacitor와 Li ion 계열 등이 대표적이다. 특히 Li ion 배터리는 모바일, 자동차 및 에너지 저장 그리드 등과 같은 다양한 분야에 가장 많이 적용되고있다. Li ion 배터리에 대하여 현재의 핵심적인 연구분야는 전극 재료(cathode, anode)와 electrolyte에 대한 것이다. Anode 전극 재료 중에서 가장 많이 사용되는 재료는 카본을 기반으로 하는 재료로 안정성에 대한 장점이 있지만 에너지 밀도가 낮다는 단점이 있다. 에너지 저장 용량 증가에 대한 필요성이 증가하기 때문에 현재 많이 사용되고 있는 에너지 밀도가 낮은 카본 재료를 대체하기 위해서 이론 용량이 높다고 알려진 실리콘과 같은 메탈이나 주석 산화물과 같은 천이 금속 산화물에 대하여 많은 연구가 진행되고 있다. 특히 현재까지 알려진 많은 재료 중에서 가장 큰 capacity (~4,000 mAh/g)를 가지고 있다고 알려진 실리콘이 카본의 대체 재료로 많은 연구가 진행되고 있다. 그러나, Li 과 반응을 하며 약 300~400%에 달하는 부피팽창이 발생하고, 이러한 부피 팽창 때문에 충 방전이 진행됨에 따라 current collector로부터 박리되는 현상을 보여 빠른 용량 감소를 보여주고 있다. 본 연구에서는 adhesion layer를 current collector와 실리콘 전극 재료 사이에 삽입하여 충 방전 시 부피팽창에 의한 미세구조의 변화와 electrochemical 특성에 대한 영향을 알아보았다. 실험에 사용한 anode 전극은 상용 Cu foil current collector에 RF/DC magnetron 스퍼터링을 통해 다양한 종류(Ti, Ta 등)의 adhesion layer과 200 nm 두께의 Si 박막을 증착하였다. 또한 Bio-logic Potentiostat/ Galvanostat VMP3 와 WanAtech automatic battery cycler 장비를 사용하여 0.2 C-rate로 half-cell 타입의 코인 셀로 조립한 전극에 대한 충 방전 실험을 진행하였다. Adhesion layer의 사용으로 인해 실리콘 박막과 Cu current collector 사이의 박리 현상을 줄여줄 수 있었고, 충 방전 시 Cu 원자의 실리콘 박막으로의 확산을 통한 brittle한 Cu-Si alloy 형성을 막아 줄 수 있어 큰 특성 향상을 확인할 수 있었다. 또한, 리튬과 실리콘의 반응을 통한 형태와 미세구조 변화를 SEM, TEM 등의 다양한 장비를 사용하여 확인하였고, 이를 통해 adhesion layer의 사용이 전극의 특성향상에 큰 영향을 끼쳤다는 것을 확인할 수 있었다.