• Journal of Microbiology and Biotechnology
• /
• 제18권12호
• /
• pp.1919-1926
• /
• 2008

Statistical experimental designs; involving (i) a fractional factorial design (FFD) and (ii) a central composite design (CCD) were applied to optimize the culture medium constituents for production of a unique antifreeze protein by the Antartic micro algae Chaetoceros neogracile. The results of the FFD suggested that NaCl, KCl, $MgCl_2$, and ${Na}_{2}{SiO}_{3}$ were significant variables that highly influenced the growth rate and biomass production. The optimum culture medium for the production of an antifreeze protein from C. neogracile was found to be Kalle's artificial seawater, pH of $7.0{\pm}0.5$, consisting of 28.566 g/l of NaCl, 3.887 g/l of $MgCl_2$, 1.787 g/l of $MgSO_4$, 1.308 g/l of $CaSO_4$, 0.832 g/l of ${K_2}{SO_4}$, 0.124 g/l of $CaCO_3$, 0.103 g/l of KBr, 0.0288 g/l of $SrSO_4$, and 0.0282 g/l of ${H_3}{BO_3}$. The antifreeze activity significantly increased after cells were treated with cold shock (at $-5^{\circ}C$) for 14 h. To the best of our knowledge, this is the first report demonstrating an antifreeze-like protein of C. neogracile.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.429-434
• /
• 2009

The OH($X^2{\Pi},\;{\nu}$"=0, 1) internal state distributions from the reaction of electronically ground state oxygen atoms with HSi$Cl_3$ were measured using laser-induced fluorescence. The ground-state O$(^3P_J)$ atoms with kinetic energies above the reaction barrier were produced by photolysis of N$O_2$ at 355 nm. The OH product revealed strong vibrational population inversion, P(${\nu}$"=1)/P(${\nu}$"=0) = 4.0 ${\pm}$ 0.6, and rotational distributions in both vibrational states exhibit substantial rotational excitations to the limit of total available energy. However, no preferential populations in either of the two $\Lambda$ doublet states were observed from the micropopulations, which supports a mechanism involving a direct abstraction of hydrogen by the atomic oxygen. It was also found that the collision energy between O and HSi$Cl_3$ is effectively coupled into the excitation of the internal degrees of freedom of the OH product ($$ = 0.62, and $<\;f_{rot}>$ = 0.20). The dynamics appear consistent with expectations for the kinematically constrained reaction which supports the reaction type, heavy + light-heavy $\rightarrow$ heavy-light + heavy (H + LH′ $\rightarrow$ HL + H′). The dynamics of oxygen atom collision with HSi$Cl_3$ are discussed in comparison to those with Si$H_4$.

• 한국표면공학회지
• /
• 제25권4호
• /
• pp.189-206
• /
• 1992

The effect of activation and electroless nickel plating conditions on contact properties was investi-gated for selective electroless nickel plating of Si wafers in order to obtain an optimum condition of con-tact hole filling. According to RCA prosess, p-type silicon (100) surface was cleaned out and activated. The effects of temperature, DMAB concentration, time, and strirring were investigated for activation of p-type Si(100) surface. The optimal activation condition was 0.2M HF, 1mM PdCl2, 2mM EDTA,$ 70^{\circ}C$, and 90sec under ultrasonic vibration. In electroless nickel plating, the effect of temperature, DMAB concentra-tion, pH, and plating time were studied. The optimal plating condition found was 0.10M NiSO4.H2O, 0.11M Citrate, pH 6.8, $60^{\circ}C$, 30minutes. The contact resistance of films was comparatively low. It took 30minutes to obtain 1$\mu\textrm{m}$ thick film with 8mM DMAB concentration. The film surface roughness was improved with decreasing temperature and decreasing pH of the plating solution. The best quality of the film was obtained at the condition of temperature $60^{\circ}C$ and pH 6.0. The micro-vickers hardness of film was about 800Hv. Plating rate of nickel on the hole pattern was slower than that of nickel on the line pattern.

• 자원환경지질
• /
• 제43권3호
• /
• pp.269-278
• /
• 2010

우리는 단청안료의 착색제에 대한 특성을 살펴보았고, 이번 연구가 우리 전통 단청의 색을 재현하는데 기여하길 바란다. 광주 전남지역 목조 고건축물에서 자연적으로 박리가 일어난 부분의 단청안료 시료를 채취하고, 이를 XRD와 EDS-SEM분석을 이용하여 착색제를 분석하였다. 백색안료에서는 고대부터 착색제로 사용되어온 석고$(CaSO_4{\cdot}2H_{2}O)$,석영$(SiO_2)$, 백연석$(PbCO_3)$ 및 호분$(CaCO_3)$과 현대에서 많이 사용되는 산화지당$(TiO_2)$이 모든 시료에서 확인되었다. 적색안료에서는 고대부터 착색제로 사용된 석간주$(Fe_{2}O_{3})$와 연단$(Pb_{3}O_{4})$ 및 현대안료 착색제인 C. I. pigment orange $13(C_{32}H_{24}C_{12}N_{8}O_{2})$이 확인 되었지만, 진사(cinnabar, HgS)는 관찰되지 않았다. 황색안료에서는 납을 주성분으로 하는 황연인 홍연석$(PbCrO_4)$과 고대부터 사용된 밀타승(PbO)이 확인되었다. 청색안료에서는 착색제인 소달라이트 $(Na_{4}BeAlSi_{4}O_{12}Cl)$와 노제안$(Na_{8}Al_{6}Si_{6}O_{24}SO_{4})$이 확인되었으며, 현대안료 착색제인 C. I. pigment blue $29(Na_{7}Al_{6}Si_{6}O_{24}S_{3})$ 도 확인되었다. 녹색안료에서는 착색제로 카루머타이트(calumetite, $Cu(OHCI)_{2}{\cdot}2H_{2}O$), 에스콜라이트$(Cr_{2}O_{3})$, 디크롬트리옥사이드(dichromium trioxide, $Cr_{2}O_{3}$), 에머랄드그린$(C_{2}H_{3}As_{3}Cu_{2}O_{8})$ 및 현대안료 착색제인 C. I. pigment green$(C_{32}H_{16}-XCl_{x}Cu_{8})$이 확인되었다. 흑색안료에서는 먹(송연)이 확인 되었다.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.615-620
• /
• 2009

The present research was performed to determine the optimal firing condition and holding time for malayaite crystal, which is responsible for the stable pink-red coloration in glaze at high temperatures, using Cr$Cl_3$ as chromophore for the synthesis of $Cr_2O_3-SnO_2-CaO-SiO_2$ system pigments. The malayaite crystal was influenced by the raw materials used for synthesis, firing temperature, and holding time. Thus there are differences in the crystal phase and in the coloration according to the condition of synthesis. When Cr$Cl_3$ was used as chromophore, the pigment could be synthesized at lower temperatures, because Cr$Cl_3$ melts at $1500{^{\circ}C}$, which is much lower than the temperature at which $Cr_2O_3$ melts (higher than $2435{^{\circ}C}$). And the employed Cr ion showed a change in oxidation state. When a mineralizer was used to improve the employment of malayaite and the Cr ion, and the low temperature was maintained at which the malayaite crystal is produced, the production of malayaite crystal was promoted and the employment of chromophore was also promoted in the oxidation state of Cr (IV). The results of the experiment showed that the optimal firing condition was 18 h of holding time at $800{^{\circ}C}$, using Cr$Cl_3$ as chromophore, followed by 2 h at the raised temperature of $1150{^{\circ}C}$. The change in coloration of the Cr (IV) employed by malayaite showed a very rich color of red. Thus it was possible to effectively synthesize sphene-pink pigments with more red tint at a low temperature.

• 한국세라믹학회지
• /
• 제28권6호
• /
• pp.429-436
• /
• 1991

Silicon carbide has been grown by a chemical vapor deposition (CVD) technique using CH3SiCl3 and H2 gaseous mixture onto a graphite substrate. Based on the thermodynamic equilibrium studies and the suggestion that the deposition rate of SiC is controlled by surface reaction theoretical kinetic equation for CVD of silicon carbide has been proposed. The proposed theoretical kinetic equation for CVD of silicon carbide agreed well with the experimental results for the variation of the deposition rate as a function of the partial pressure of reactant gases. The Vikers microhardness of the SiC layer was about 3000∼3400 kg/$\textrm{mm}^2$ at room temperature.

• 통합자연과학논문집
• /
• 제15권1호
• /
• pp.19-25
• /
• 2022

The diarylsilyl compound, C₁₄H₁₂Br₄Si, was prepared from the reaction of 3,5-dibromophenyllithium with dimethyldichlorosilane, (CH₃)₂SiCl₂, at -78 ℃, can be a good synthon for derivatization to produce efficient host materials for organic light emitting diodes (OLEDs). Crystal structure analysis shows a slight deviation from ideal tetrahedral symmetry around the Si atom, whose conformation is effective in ensuring the maximum separation of the two phenyl rings and the two methyl substituents. The directions of the two aromatic rings are almost perpendicular to each other. The molecule exists as a monomer in the solid state.

• 자원리싸이클링
• /
• 제22권2호
• /
• pp.22-28
• /
• 2013

실리콘 슬러지로부터 원심분리에 의해 1 단계로 실리콘(Si)을 분리 한 후 남게 되는 실리콘 카바이드(SiC) 농축물 내에 포함되어 있는 철과 잔존하는 실리콘을 추가적으로 제거함으로써 실리콘 카바이드의 순도를 향상 시킬 수 있는 가능성을 탐색해 보았다. 실리콘 카바이드 농축물을 대상으로 하여 염산(HCl)/수산화나트륨(NaOH)에 의한 액상 침출법과 염소 가스에 의한 기상 염소화법을 비교해 보았다. 실리콘 카바이드 농축물을 1 M 염산 수용액에서 $80^{\circ}C$에서 1 시간 동안 침출시킴으로써 회수된 실리콘 카바이드에 잔류하는 철의 농도를 49 ppm 까지 제거하였으며, 1 M 수산화나트륨 수용액에서 $50^{\circ}C$에서 1 시간 동안 침출시킴으로써 실리콘 카바이드 내 잔류하는 실리콘의 농도를 860 ppm 까지 제거하였다. 기상 염소화 반응은 직경 2.4 cm, 길이 32 cm의 전기로에 의해 가열되는 알루미나 튜브의 중심에 실리콘 카바이드 농축물을 위치시키고, 질소와 염소의 혼합가스를 흘려보내는 방식에 의해 이루어졌는데, 반응온도 $500^{\circ}C$, 반응시간 4 시간, 가스유량 300 cc/min, 염소 몰분율 10%의 조건 하에서 실리콘 카바이드 내 철과 실리콘의 잔류 농도를 48 ppm과 405 ppm 까지 낮출 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제15권2호
• /
• pp.126-132
• /
• 1994

RhCl [P($C_6H_5)_3]_3$ complexes have been incorporated in polysulfone (PS) as a dispersion medium using cosolvent (THF). The interactions between Rh(Ⅰ) complexes and polysulfone polymer molecules are examined by infrared spectroscopy and thermal analysis. The chemical reactivity of Rh in PS films has been investigated by reacting Rh sites with CO, $H_2,\;D_2,\;O_2\;NO,\;C_2H_2\;and\;C_2H_4$ in the temperature range $25-200^{\circ}C$. Various Rh-carbonyl, -hydride and -nitrosyl species formed in PS films are characterized by their infrared spectra. Rh complexes in PS film show interesting catalytic reactivities in the reactions such as hydrogenation of $C_2H_2\;and\;C_2H_4$, oxidation of CO, and reduction of NO by CO or $H_2$ gas under relatively mild conditions.

• 지질공학
• /
• 제26권4호
• /
• pp.561-570
• /
• 2016

온양지역 온천수의 수질특성을 파악하기 위하여 2011년과 2016년에 24개 온천수의 수질을 분석한 결과 5년 동안 수온과 수질에는 큰 변화가 없었다. 2016년 온천수의 수온과 $SiO_2$, F와는 정의 상관관계($r^2=0.60$, 0.47)를, Ca, Mg, Cl, $SO_4$, $HCO_3$, EC와는 부의 상관관계($r^2=0.50$, 0.11, 0.50, 0.63, 0.23, 0.51)를 나타낸다. 온천수의 수온과 pH는 양의 상관관계, DO와는 음의 상관관계를 보여 온양지역 온천수는 심부 기원임을 지시한다. 온천수 수질 유형은 대부분이 심부기원인 $Na-HCO_3$ 형으로 분류되나 일부 온천공은 $Na(Ca)-HCO_3$ 형으로도 분류되어 천부 지하수의 유입특성도 보인다.