Recently, surface texturing by atmospheric laser processing has been received lots of attention to improve the tribological performance of various surfaces and this laser texturing of surfaces could be considered in a large extent to improve tribological performance of PVD coated surface. Surface texturing could be performed by various manufacturing techniques such as indentation with hard materials, ion etching, abrasive jet machining, lithography, and Laser Surface Texturing (LST). Out of all these techniques, however it is generally accepted that laser surface texturing (LST) by atmospheric laser processing offers the most promising process as LST is very fast, environmentally-friendly, easy to control the shape and size of the microdimples. In this work various preliminary experimental results from the laser texturing on the PVD-coated steel substrate will be presented. Our results indicated that laser texturing definitely affect the tribological performance of the surfaces and the size as well as pattern type of laser texturing are one of the key factors. From the wear tests against an alumina counterpart ball at room temperature under oil-lubricated condition, laser surface texturing on the CrZrSiN films reduced the friction coefficients by approximately more than 5 times in the case of narrow patterned surfaces.
The effects of texturing and anti-reflection coating on the reflection properties of multi-crystalline silicon solar cell have been investigated. The chemical solutions of alkaline and acidic etching solutions were used for texturing at the surface of multi-crystalline Si wafer. Experiments were performed with various temperature and time conditions in order to determine the optimized etching condition. Alkaline etching solution was found inadequate to the texturing of multi-crystalline Si due to its high reflectance of about 25%. The reflectance of Si wafer texturing with acidic etching solution showed a very low reflectance about 10%, which was attributed to the formation of homogeneous. Also, deposition of ITO anti-reflection coating reduced the reflectance of multi-crystalline si etched with acidic solution($HF+HNO_3$) to 2.6%.
우리 연구팀은 $SiO_2$ nanospheres를 이용한 natural lithography를 통해 2가지 방법으로 GaAs 기판의 반사율을 감소시켰다. 먼저 GaAs 기판 위에 benzocyclobutene(BCB) 고분자를 코팅한 후, 그 위에 $SiO_2$ nanospheres를 코팅한다. 그리고 고분자의 유리전이 온도이상으로 가열하면 $SiO_2$ nanospheres가 고분자 속으로 가라앉게 되어 렌즈 형태의 표면이 형성된다. 또한, 이 상태에서 BOE 용액을 통해 $SiO_2$ nanospheres를 제거하여 오목한 형태의 표면을 형성할 수 있다. 이러한 2가지 방법의 surface texturing을 통해 우리는 GaAs 표면의 반사도를 각각 400~800nm의 파장에서 평균 13.6%~16.52%의 반사율을 얻을 수 있었다.
태양전지를 제작하는데 실리콘기판 표면에서의 광 흡수를 증가시키기 위한 표면조직화를 위해서 염기 용액을 이용한 습식방법을 이용하여 샘플을 제작하였다. 이렇게 준비된 염기성 에칭용액을 이용한 실리콘 웨이퍼의 표면 상태를 관찰하여 광학적 특성과의 연관성을 조사하였다. 표면조직화가 표면 전체적으로 고르게 이루어진 샘플에서 반사도가 낮았으며, 광학적 특성이 좋게 나타났다. 에칭이 과도하게 일어난 샘플에서는 오히려 반사도가 증가하여 광학적 특성이 떨어지는 것을 확인 하였다.
나노결정질 다이아몬드 박막 증착을 위한 전처리 공정으로 $SF_6/O_2$ 유도결합 플라즈마를 이용하여 Si 기판 표면을 texturing하였다. $SF_6/O_2$ 플라즈마 texturing은 2~16 범위의 매우 넓은 정규화된 표면 조도 선택성을 제공할 수 있음을 확인하였다. Texturing된 Si 기판 표면의 나노 다이아몬드 입자 seeding 이후 기존 기계적 연마 전처리에 비해 현저히 향상된 ${\sim}6.5{\times}10^{10}cm^{-2}$의 높은 핵형성 밀도를 확보하였다.
Wet chemical etching methods were utilized to conduct Si surface texturing, which could enhance photoelectrochemical hydrogen generation rate. Two different etching methods tested, which were anisotropic metal-catalyzed electroless etching and isotropic etching. The Si nano-texture that was fabricated by the anisotropic etching showed ~25% increase in photocurrent for H2 generation. The photocurrent enhancement was attributed to the reduced reflection loss at the nano-textured Si surface, which provided a layer of intermediate density between water and the Si substrate.
Surface Texturing is very important process for high cell efficiency in crystalline silicon solar cell. Anisotropic texturing with an alkali etchant was known not to be able to produce uniform surface morphology in multi-crystalline silicon (mc-Si), because of its different etching rate with random crystal orientation. In order to reduce surface reflectance of mc-Si wafer, the general etching tendency was studied with HF/HN$O_3$/De-ionized Water acidic solution. And the surface structures of textured mc-Si in various HF/HN$O_3$ ratios were compared. The surface morphology and reflectance of textured silicon wafers were measured by FE-SEM and UVvisible spectrophotometer, respectively. We obtained average reflectance of $16{\sim}19$% for wavelength between 400 nm and 900 nm depending on different etching conditions.
본 실리콘 태양전지 셀을 제작하는데 있어서, 기판 표면에서의 광 흡수를 증가시키기 위한 texturing은 KOH+IPA+DI $H_2O$를 혼합한 에칭용액의 온도를 80도로 유지하면서 1~40분 동안 에칭시간을 각각 다르게 하고 태양전지 시료를 제작하였다. 셀의 특성분석은 SEM과 I-V 특성곡선을 이용하였으며, 실리콘 태양전지 셀의 효율과 texturing에 의한 표면 거칠기 사이의 상관성을 조사한 결과, Texturing이 표면 전체적으로 고르게 이루어진 샘플에서 효율이 높게 나타났다. 에칭이 과도하게 일어난 샘플에서는 효율이 오히려 감소하였다.
실리콘 태양전지는 KOH 에칭 용액을 이용하여 texturing 시간을 다르게 하는 방법으로 표면의 texturing 상태를 다양하게 제작하였다. 그리고 $POCl_3$ 공정을 이용하여 n형 불순물을 도핑하여 pn접합을 만들었으며, 알루미늄 후면전극과 은 전면전극을 이용하여 Si-cell을 제작하였다. 피라미드 구조가 가장 크고 표면에 고르게 형성된 태양전지 셀에서 F.F. 계수가 높게 나타났으며, 효율도 높게 나타났다. texturing 형성이 잘 이루어진 셀인 경우 빛을 많이 흡수할 수 있고 회로 내부적으로는 직렬저항성분이 감소하여 단락전류성분이 현저히 증가하게 되어 최종적으로 효율이 증가되는 것을 확인하였다.
다결정 실리콘 태양전지 표면의 광흡수율을 극대화시키기 위하여 플라즈마기반의 reactive ion etching (RIE) 공정을 적용하였으며 maskless 표면 texturing조건을 최적화하여 310~1,100 nm 파장대역의 평균 표면반사율을 $4{\pm}1%$ 내외로 감소시킬 수 있는 grass-like 한 블랙실리콘을 제조할 수 있었다. Saw damage를 가진 $15.6{\times}15.6\;cm^2$ bare 웨이퍼에서부터 중요 공정단계별로 처리된 시료들의 평균반사율, 표면형상, 소수운반자 수명 등의 위치분포를 측정하여 최종 제작된 태양전지의 광전변환효율과 외부양자효율 등과 비교 검토하여 고효율 다결정 실리콘 태양전지 양산에 필요한 표면 texturing 조건들을 연구하였다. 평균 반사율을 4% 이하로 감소시키는 texturing 공정조건에서 웨이퍼 중앙에서 가장자리로 갈 수록 표면구조의 깊이 2배 반치폭 3배의 불균일성이 발생하였으며 이에 따라 입사광자의 다중반사확률이 높아져 평균반사율이 1% 정도 낮아지는 것으로 밝혀졌다. 비반사막이 코팅된 시료에서 측정된 소수운반자수명분포도 중앙에서 가장자리로 갈수록 약 40% 이상 더 긴 수명을 갖는 것으로 밝혀져 표면구조의 크기에 따른 사이즈효과가 발생하는 것으로 판단된다. 제조된 태양전지의 위치에 따른 광전변환효율도 낮은 반사율과 더 긴 소수운반자수명을 갖는 가장자리에서 2% 가량 높은 광전변환효율을 보였으며, 380~1,100nm 파장대역의 외부양자효율 측정결과도 이를 뒷받침하고 있다. 균일한 에미터 층 형성 및 ARC 증착에 있어서 구조적으로 가장자리 부분의 구조가 유리한 것으로 예상되며, 동시에 표면 구조의 사이즈 효과 때문에 표면 재결합확률이 중앙보다 가장자리에서 더 감소되어 더 높은 광전변환효율을 보이는 것으로 해석된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.