• Korean Journal of Materials Research
• /
• v.7 no.8
• /
• pp.654-659
• /
• 1997

HMDS[Si$_{2}$(CH$_{3}$)$_{6}$]단일 선구체를 이용하여 화학증착 방법으로 성장된 3C-SiC/Si(001) 이종접합박막의 특성을 XRD, 라만 스펙트럼 및 투과전자현미경(TEM)등을 이용하여 조사하였으며 시판되고 있는 상용 3C-SiC/Si 시편을 같은 방법으로 분석하여 특성을 비교검토하였다. $C_{3}$H$_{8}$-SiH$_{4}$-H$_{2}$혼합가스를 선구체로 이용하여 5$\mu\textrm{m}$두께로 성장된 상용 3C-SiC/Si 이종접합박막 시료의 XRD스펙트럼에서는 강한 3C-SiC(002)피크 만이 관찰되었으며, 라만 스펙트럼의 LO피크는 970nm$^{-1}$ 정도에서 강하게 나타났다. TEM 관찰 결과 다수의 전위, 쌍정, 적층결함 및 APB와 같은 결정결함들이 3C-SiC/Si 계면 근처에 집중적으로 분포되어 있었으며 성장된 박막은 단결정임을 확인할 수 있었다. 선구체로 HMDS를 사용하여 0.3$\mu\textrm{m}$ 및 2$\mu\textrm{m}$ 두께로 성장시킨 3C-SiC/Si 박막 시료의 XRD 스펙트럼은 다소 완만한 3C-SiC(002) 피크와 함께 3C-SiC(111)피크가 관찰되었으며, TEM으로 확인한 결과 소경각 결정립들이 약 5˚-10˚ 정도 방위차를 가지고 성장하여 기둥구조(columnar structure)를 이루고 있기 때문임을 알 수 있었다. 라만 스펙트럼 분석 결과 박막의 LO 피크가 967-969nm$^{-1}$정도로 다소 낮은 wavenumber쪽으로 이동되어 박막 내에 상당한 응력이 존재함을 확인할 수 있었다. 이와 같은 HMDS 3C-SiC박막의 특성은 성장 온도가 낮고 박막 성장용 가스로 사용한 HMDS 선구체에서 탄소가 과잉으로 공급되기 때문으로 제안되었다.다.

• Journal of the Korean Magnetics Society
• /
• v.6 no.5
• /
• pp.323-328
• /
• 1996

NiFe($60\;{\AA}$)/Cu($60\;{\AA}$)/Co($30\;{\AA}$) trilayers were formed on the $4^{\circ}$ tilt-cut Si(111) substrate by rf magnetron sputtering method. With a Cu($50\;{\AA}$) underlayer, NiFe($60\;{\AA}$)/Cu($60\;{\AA}$)/Co($30\;{\AA}$) trilayers developed in-plane magnebc anisotropy and in-plane perpendicular alignment of easy axes in two magnetic components of NiFe($60\;{\AA}$)/Cu($60\;{\AA}$)/Co($30\;{\AA}$) trilayers has been found. The easy axis of Co layer consisbng of NiFe($60\;{\AA}$)/Cu($60\;{\AA}$)/Co($30\;{\AA}$) trilayers turned out to be along $4^{\circ}$ tilt Si <112> direcbon and that of NiFe layer along Si <110> direction. [NiFe($60\;{\AA}$)/Cu($60\;{\AA}$)/Co($30\;{\AA}$)]/Cu($50\;{\AA}$)/Si(111, $4^{\circ}$ tiIt-cut) trilayers showed about 2.2 % MR ratio at room temperature and large plateau in MR curves, which are more improved MR characteristics than those in [NiFe($60\;{\AA}$)/Cu($60\;{\AA}$)/Co($30\;{\AA}$)]/Cu($50\;{\AA}$)/glass trilayers with no appreciable magnetic anisotropy.

• Applied Microscopy
• /
• v.21 no.2
• /
• pp.57-66
• /
• 1991

The main purpose of this paper was to investigate the change of rapidly solidified microstructures and dispersoid behavior according to heat-treatment in the Al-Fe-V-Si-(Mn) alloys. It was found that (111) preferred orientation identified by X-ray diffraction and fine subgrain/large grain were observed in the rapidly solidified Al-Fe-V-Si-(Mn) alloys. Cell boundary of the zone A was composed of the microcrystalline, whereas that of the zone B was amorphous. Decomposition of the Al-Fe-V-Si-(Mn) alloys occurred at about $300^{\circ}C$. These alloys exhibited excellent thermal stability at the elevated temperature. Microstructure of the zone B was more stable than that of the zone A. The spherical dispersoid and 5-fold symmetry phase was also more thermally stable than the amorphous structure of cell boundary.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.6
• /
• pp.389-393
• /
• 2014

A thin metal-embedding Schottky device was fabricated for an efficient photoelectric device. Semitransparent thick of 10 nm metal layers were deposited by sputtering of Ag and Ni on a Si substrate. The (111) N-type Si wafers with one-side polished, 450~500 ${\mu}m$ and resistivity $1{\sim}20{\Omega}{\cdot}cm$ were used. High rectifying ratio about 100 from Ni-Schottky device was achieved. This design would provide an effective scheme for high-performing photoelectric devices.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.111-115
• /
• 1997

Vertical-cavity surface-emitting laser(VCSEL)s operating at 1.3-micron wavelength for optical communication are fabricated by using Si/SiO$_2$dielectric quater-wave pairs on both sides of the InGaAsP(${\lambda}_g$=1.3 ${\mu}{\textrm}{m}$) gain material. VCSELs are optically pumped with a Nd-YAG laser in a pulsed mode and lasing around 1.3 microns is observed. Lasing characteristics such as threshold pump intensity as a function of mirror-reflectivity, polarization, and threshold pump density with pump spot size are investigated.

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.1
• /
• pp.111-118
• /
• 1998

본 연구에서는 차세대 집적회로 device의 배선재료로서 사용될 가능성이 높은 Cu 금속을 무전해 도금으로 증착시킨 후 집적회로 공정에 필요한 열적 안정성에 대하여 고찰하 였다. MOCVD방법으로 Si 기판위에 TaN 박막을 확산 방지막으로 증착시킨 다음 무전해도 금으로 Cu막을 증착시켜 Cu/TaN/Si 구조의 다층박막을 제조하여 H2 환원 분위기에서 열처 리시킴으로서 열처리 온도에 따른 Cu 박막의 특성과 확산방지막 TaN와의 계면반응 특성에 대하여 고찰하였다. 활성화 처리와 도금용액의 조절을 적절히 행함으로서 MOCVD TaN 박 막위에 적당한 접착력을 지닌 Cu 박막층을 무전해 도금법을 사용하여 성공적으로 증착시킬 수 있었다. XRD, SEM 분석결과에 의하면 H2 환원분위기에서 열처리시켰을겨우 35$0^{\circ}C$~ $600^{\circ}C$ 범위에서 결정립 성장이 일어나 Cu 박막의 미세구조 특성이 개선됨을 알수 있었다. 또한 XRD, AES 분석에 의하여 열처리 온도에 따른 계면반응 상태를 조사해본 결과 $650^{\circ}C$ 온도에서는 Cu 원자가 TaN 확산방지막을 통과하여 Si 기판내로 확산함으로서 계면에서 Cu-Si 중간화합물을 형성하였다.

• Journal of Information Display
• /
• v.13 no.3
• /
• pp.107-111
• /
• 2012

An almost pure phase of $Ba_3Si_6O_{12}N_2$ doped with $Eu^{2+}$ was successfully synthesized through the ammonia nitridation of an oxide precursor prepared through an aqueous-solution method, using propylene- glycol-modified silane. The emission peak intensity of the obtained $Ba_3Si_6O_{12}N_2:Eu^{2+}$ was -2.2 times higher than that of the sample prepared through a solid-state reaction method.

• Korean Journal of Materials Research
• /
• v.16 no.4
• /
• pp.213-217
• /
• 2006

In this study, atomic layer etching of Si has been carried out using $Cl_2$ adsorption followed by the irradiation Ar neutral beam of low energy. In this experiment, the etch rate of Si was dependent on the $Cl_2$ pressure(the surface coverage of chlorine) and the irradiation time of Ar neutral beam(the flux density of Ar neural beam). And the etch rate of Si(100) and Si(111) were saturated exactly at one monolayer per cycle with $1.36{\AA}/cycle\;and\;1.57{\AA}/cycle$, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.65-66
• /
• 2000

Various fluoride films on a glass substrate were prepared and characterized to provide a seed layer for crystalline Si film growth. The XRD analysis on $CaF_2/glass$ illustrated (220) preferential orientation and showed lattice mismatch less than 5 % with Si. We achieved a fluoride film with breakdown electric field of 1.27 MV/cm, leakage current density about $10^{-6}$ $A/cm^2$, and relative dielectric constant less than 5.6. This paper demonstrates microcrystalline silicon $({\mu}c-Si)$ film growth by using a $CaF_2/glass$ substrate. The ${\mu}c-Si$ films exhibited crystallization in (111) and (220) planes, grain size of $700\;{\AA}$, crystalline volume fraction over 65 %, dark- and photo-conductivity ratio of 124, activation energy of 0.49 eV, and dark conductivity less than $4{\times}10^{-7}$ S/cm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.133-135
• /
• 2006

SBN60 and SBN60/30 thin films were deposited by ion beam sputtering technique. Using the ceramic target of the same composition and Pt(100)/$TiO_2$/$SiO_2$/Si or Pt(111)/Ti/$SiO_2$/Si substrate, crystallization and orientation behavior as well as electric properties of the films were examined, Thickness was controlled to $3000{\AA}$ and the films were heat-treated at $650^{\circ}C{\sim}800^{\circ}C$. The orientation and crystallization behavior were observed which showed the dependence on processing condition($O_2$/Ar ratio, substrate temp, annealing temp...).