• 한국진공학회지
• /
• 제16권6호
• /
• pp.433-438
• /
• 2007

열처리 온도에 따른 Au 결정립 크기의 변화와 표면 거칠기 및 전기전도도를 연구하기 위해 dc 마그네트론 스퍼터링법을 사용하여 Si(111) 또는 Si(100) 기판위에 Au (30nm) 와 Ta (5 nm)/Au (30 nm) 를 증착하였다. 열처리 온도가 증가함에 따라 시료의결정립 크기가 증가하였고, 박막 표면 거칠기 또한 증가함을 확인하였다. Si/Au보다Si/Ta/Au구조에서 결정립 크기가 증가하였고 표면거칠기는 감소되었으며 Si(111)기판보다 Si(100) 기판위의 Ta/Au구조에서 전기 저항이 감소되었다. Si(100)/Au구조에 5 nm 두께의 Ta의 buffer layer를 삽입하여 표면 거칠기 정도를 낮춤과 동시에 열처리 온도를 적절히 조절하여 결정립 크기를 증가시킴으로서 전도성이우수한 양질의 Au 박막을 얻을 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.59-60
• /
• 2005

The characteristics of GaN epitaxial layers grown on silicon (111) substrates by metalorganic vapor phase epitaxy have been investigated. The only control of AIN thickness was found to decrease the stress sufficiently for avoiding crack formation in an overgrown thick ($2.6{\mu}m$) CaN layer. X-ray diffraction measurementsare used to determine the effect of AIN thickness on the strain in the subsequent GaN layers. The 437arcsec linewidth on the (002) x-ray rocking curve also attest the high crystalline quality of GaN on Si (111).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1997년도 제13회 학술발표회 논문개요집
• /
• pp.160-161
• /
• 1997

• 한국세라믹학회지
• /
• 제32권10호
• /
• pp.1103-1110
• /
• 1995

Silicon carbide (SiC) films have been deposited on the isotropic graphite by chemical vapor deposition. Change of deposition parameters affected significantly the microstructure and preferred orientation of SiC films. Preferred orientation of SiC films was (111) or (220), and microstructure showed the startified structure consisting of small crystallite or faceted columnar structure depending on the deposition parameters. For microhardness, (111) oriented film and stratified structure were superior to (220) oriented film and faceted columnar structure, respectively. Surface of (111) oriented films was less rough than that of (220) oriented films. Adhesion force between graphite substrate and SiC films was above 100N for crystalline films and 49N for amorphous film.

• 한국진공학회지
• /
• 제3권3호
• /
• pp.275-279
• /
• 1994

Low Energy Electron Diffraction(LEED)와 Synchrotron Radiation Photoelectron Spe-ctroscopy (SRPES)를 이용하여 $Si(111)7{\times}7$ 표면위에 Mg의 흡착에 의한 초기계면과 실리사이드의 형성에 대하여 연구하였다. 기판온도를 상온으로 유지하는 경우 증착량의 증가에 따라 LEED pattern은 diffuse 7${\times}$7 diffuse 1${\times}$1, $2/3sqrt{3}{\times}2/3sqrt{3} R30^{\cdot}$ 구조로 변화하였다. $300^{\cdot}C$의 기판온도에서 관측되는 1${\times}$1 구조에 대한 surface sensitive Si 2p core level spectrum의 fitting 결과로부터 이 1${\times}$1구조는 적층성장한 Mg2Si 박막에 의한 구조임을 알수 있다. 그러나 이 1${\times}$1구조를 가진 Mg2Si 박막이 성장하지 못함을 예상할 수 있다. 그결과 Mg의 계속된 증착에도 불구하고 비정질의 Mgqkr막이 성장하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1250-1253
• /
• 1994

(100), (110) and (111) Si wafers are etched by isotropic etching method, anisotropic etching method using KOH etchant and EPW etchant and combined two-step etching method to compare the results. Isotopic etching method is effective in fabrication of wedge-shaped tips, especially (110) Si. Anisotropic etching method of (100) Si using EPW etchant can fabricate sharp cone-shaped tips and isotropic etching after anisotropic etching of (100) Si can fabricate wedge-shaped tips.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 추계학술발표강연 및 논문개요집
• /
• pp.94-94
• /
• 2002

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1999년도 추계연구발표회 논문개요집
• /
• pp.40-41
• /
• 1999

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.99-99
• /
• 2003

The growth of GaN on Si is of great interest due to the several advantages : low cost, large size and high-quality wafer availability as well as its matured technology. The crystal quality of GaN is known to be much influenced by the surface pretreatment of Si substrate[1]. In this work, the properties of GaN overlayer grown on ion beam modified Si(111) have been investigated. Si(111) surface was treated RIB with 1KeV-N$_2$$\^$+/(at 1.9 ${\times}$ 10$\^$-5/) to dose ranging from 5${\times}$10$\^$15/ to 1${\times}$10$\^$17/ prior to film growth. GaN epilayers were grown at 1100$^{\circ}C$ for 1 hour after growing AlN buffer layers for 5∼30 minutes at 1100$^{\circ}C$ in Metal Organic Chemical Vapor Deposition (MOCVD). The properties of GaN epilayers were evaluated by X-Ray Diffraction(XRD), Raman spectroscopy, Photoluminescence(PL) and Hall measurement. The results showed that the ion modified treatment markedly affected to the structural, optical and electrical characteristic of GaN layers.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.150-150
• /
• 2000

The adsorption geometry and the electronic property of Mg grown at room temperature on the Si(111)-7$\times$7 surface with various coverages have been studied by scanning tunneling microscopy (STM) and low energy electron diffraction (LEED). At low Mg coverage, the Mg atoms preferentially adsorb at the center adatom sites of the faulted half of the Si(111)-7$\times$7 surface. The adsorbed Mg atom acts as nucleophile with respect to Si atoms thus forms a stable ionic bond with the substrate Si atoms. Above 1 Ml, the 7$\times$7 surface starts to be disrupted and an amorphous Mg overlayer is formed. The LEED shows either $\delta$7$\times$7 or 1$\times$1 pattern at this coverage. When more Mg atoms were exposed, a flat and broad {{{{ { 2} over {3 } }}}}{{{{ SQRT { 3} }}}}$\times${{{{ { 2} over {3 } }}}}{{{{ SQRT { 3} }}}}R30$^{\circ}$region evolves. A flat silicide is formed at first and multi-level Mg islands having hexagonal step edges develop with increasing coverage. The scanning tunneling spectroscopy (STS) confirms the electronic properties of these Mg films on the si(111) 7$\times$7 surface at various coverages.