• Atmosphere
• /
• v.28 no.3
• /
• pp.317-324
• /
• 2018

In this study, we review the ground-based whole-sky camera (WSC), which is developed to continuously capture day and night cloud images using the illumination data from a precision Lightmeter with a high temporal resolution. The WSC is combined with a precision Lightmeter developed in IYA (International Year of Astronomy) for analysis of an artificial light pollution at night and a DSLR camera equipped with a fish-eye lens widely applied in observational astronomy. The WSC is designed to adjust the shutter speed and ISO of the equipped camera according to illumination data in order to stably capture cloud images. And Raspberry Pi is applied to control automatically the related process of taking cloud and sky images every minute under various conditions depending on illumination data from Lightmeter for 24 hours. In addition, it is utilized to post-process and store the cloud images and to upload the data to web page in real time. Finally, we check the technical possibility of the method to observe the cloud distribution (cover, type, height) quantitatively and objectively by the optical system, through analysis of the captured cloud images from the developed device.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.3
• /
• pp.49-54
• /
• 2009

Visual occlusion method is a visual demand measuring technique which uses periodic vision/occlusion cycle to simulate driving environment. It became one of the most popular techniques for the evaluation of in-vehicle interfaces due to its robustness and cost-effectiveness. However, it has a limitation in that the vision/occlusion cycle forces the user to use the IVIS at a predetermined pace, while a driver decides when to use the device on his/her own in actual driving. This paper proposes a user-driven visual occlusion method for measuring the visual demand of in-vehicle interfaces. An experiment was conducted to examine the visual demand of an in-vehicle interface prototype using both the existing (system-driven) occlusion method and the proposed (user-driven) one. Two in-vehicle tasks were evaluated: address input and radio tuning. The results showed that, for the radio tuning task, there were significant differences in total shutter open time and resumability ratio between the methods. The user-driven visual occlusion method not only allows a better representation of drivers' behavior, but it also seems to provide more information on the chunkability of a task.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.175-183
• /
• 2003

The purpose of this study was to analyze the kinetic energy of putter head and ball movements during the process of impact. Highly skilled 5 golfers(less than 1 handicap) participated in this study and the target distance was 3 m. Movements of ball and putter head were recorded with 2 VHS video cameras(60 Hz, 1/500 s shutter speed). Small control object($18.5{\times}18.5{\times}78.5\;cm$) was used in this sdtuldy. Analyzing the process of impact, putter was digitized before 0.0835 s and after 0.0835 s of impact. Ball was digitized 0.1336 s after impact. The results showed that the maximum speed was appeared at Impact and prolonged for a while. Contact point of the club head was within 0.7 cm to the z axis. After contacting the club head, the ball was moved above the ground level(slide) and returned to the ground with sliding and rolling. After contacting the ground, the speed of ball was relied on the surface of the ground. During impact, 70% of kinetic energy of club head has been transferred to the ball.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.3
• /
• pp.259-268
• /
• 2022

Electric shutters for buildings are being developed in Korea and abroad on a regular basis and can be used in different types of buildings such as company buildings and fire stations, etc. However, the fall risk factors induced by a variety of functions of building electric shutters require safety control. We reviewed the technological trends and legal standards in Korea and abroad, analyzed incident cases, and identified fall risk factors requiring control. We inspected all the building electric shutters in Korea based on the fall risk factors. As a result, we identified 91 noncompliance cases, in 69 percent of all 132 locations. In this study, backed by the inspection results, we suggest a check list to prevent the fall of building electric shutters to ensure safety and conduct verification using a focus group interview.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.4
• /
• pp.367-378
• /
• 2007

We present a software which we developed for the multi-purpose CCD camera. This software can be used on the all 3 types of CCD - KAF-0401E ($768{\times}512$), KAF-1602E ($1536{\times}1024$), KAF-3200E ($2184{\times}1472$) made in KODAK Co.. For the efficient CCD camera control, the software is operated with two independent processes of the CCD control program and the temperature/shutter operation program. This software is designed to fully automatic operation as well as manually operation under LINUX system, and is controled by LINUX user signal procedure. We plan to use this software for all sky survey system and also night sky monitoring and sky observation. As our results, the read-out time of each CCD are about 15sec, 64sec, 134sec for KAF-0401E, KAF-1602E, KAF-3200E., because these time are limited by the data transmission speed of parallel port. For larger format CCD, the data transmission is required more high speed. we are considering this control software to one using USB port for high speed data transmission.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.2
• /
• pp.149-155
• /
• 2015

MEMS-based louver and shutter type conventional variable emissivity radiators change their emissivity properties in accordance with a temperature condition to achieve efficient thermal control performance. However, there are some drawbacks such as a structural safety of the mechanical moving parts under sever launch environment and constant power consumption to maintain the intended emissivity. In this study, to overcome above drawbacks, we proposed a MEMS-based variable emissivity radiator, which can change the emissivity property according to the polarity change of electrodes by using electric charge of the bead. The effectiveness of the optimized radiator design has been demonstrated through the comparison of efficiency with the fixed emissivity radiator.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.1
• /
• pp.15-22
• /
• 2014

This paper presents the implementation of a control system of pellet boiler using wood pellet as carbon neutral material. The system also has the additional features to provide remote controlling and monitoring based on home networking technology through either public switched telephone networks or mobile communication networks. It consists of three kinds of sub-modules; a main controller provides basic and additional features such as a setting of temperature, a supplying of wood pellet, a controlling of ignition and fire-power, and a removing of soot. The second is temperature controller of individual rooms which is connected to the main controller through RS-485 links. And interface modules with PSTN and mobile networks can support remote controlling and monitoring the functions. The test results under the heating area of $172m^2$ show a thermal efficiency of 93.6%, a heating power of 20,640kcal/hr, and a fuel consumption of 5.54kg/hr. These results are superior to those of the conventional pellet boilers. In order to obtain the such high performance, we newly applied a 3-step ignition flow, a flame detection by $C_dS$ sensor, and a fire-power control by fine controlling of shutter to our pellet boiler.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.1
• /
• pp.203-319
• /
• 2020

The regulation of satellite remote sensing is generally included with the scope of statutes governing outer space activities. But not all states opted for dedicated satellite remote sensing regulation. The decision whether to do so depends in part on the specific capabilities of national satellite remote sensing programs. Five states that have dedicated statutes governing operations with remote sensing data are the United States, with its developed Landsat regime (the Land Remote Sensing Policy Act of 1992, LRSPA), Canada, with its Remote Sensing Systems Act, Germany, with its Satellite Data Securities Protection Act (SatDSiG), France, with its Law on Space Operations (LOS), Japan, with its Act on Ensuring Appropriate Handling of Satellite Remote Sensing Data. The major purpose of this article is to shed light on some legal issues surrounding remote sensing activities by comparative review. The paper analyzes international conventions or soft law and national law and policies relating to satellite remote sensing. It also offers some implications and suggestions for regulations of satellite remote sensing operations and satellite data.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.83-88
• /
• 2007

The purpose of this study was to investigate the ball velocity changes depending on the different linear momentum of putter head. For this study, two different moving conditions(25cm free fall and 35cm free fall) of putter head were set. And two different types of ground conditions were used which are artificial grass green($180cm{\times}600cm{\times}1cm$) and glass green($40cm{\times}130cm{\times}1cm$). Movements of putter head and ball were recorded with 2 HD video cameras(60 Hz, 1/500s shutter speed). Small size control object($18.5cm{\times}18.5cm{\times}78.5cm$) was used in this study. Ball and putter head velocities were calculated by the First Central Difference Method(Hamill & Knutzen, 1995). Linear momentum of ball and putter head were calculated with mass and its velocities. Before impact, the velocity of the putter head of 35cm free fall was about 30% greater than that of the putter head of 25cm free fall. Linear momentum of putter head of 35cm free fall was about 0.355-0.364kg m/s and 25cm free fall was 0.251 kg m/s. After impact, putter head lost its linear momentum about 14-19% and adjusting time of putter head after impact would be 0.1 second. After 0.1 second, putter moved the route same as before impact. Maximum ball velocities were appeared 0.08s-0.10s after impact no matter what the ground conditions are. Ball velocities struck by 35cm free fall were 30 % faster than 25cm free fall. Linear momentum of ball struck by putter head was greater than that of expected amount because the moving ball has translational energy and rotational energy. Future study must treat three things. One is ball must struck by the different putters with different materials. Another is two-piece ball and three-piece ball should be used for the same condition studies. The other is height of center of rotation of club should be changed. In this study, the height of center of rotation of club head is 71cm from the ground. But recently many golfers used the long putter. Therefore next study should apply the different height of center of rotation of club head.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.91-97
• /
• 2007

The purpose of this study was to investigate the changes of various balls velocity under the different surface conditions after impact. For this study, four different balls were used which are golf ball, tang-tang ball, table tennis ball, and iron ball. And two different types of ground conditions were used which are artificial grass green and glass green. Movements of putter head and ball were recorded with 2 HD video cameras(60 Hz, 1/500s shutter speed). Small size control object($18.5cm{\times}18.5cm{\times}78.5cm$) was used in this study. To transfer the same amount of kinetic energy to the ball, pendulum putting machine was used. Analyzing the process of impact and the ball movement, a putter was digitized the whole movement but the ball was digizited within the 50cm movement. Velocities were calculated by the first central difference method(Hamill & Knutzen, 1995). Putter head velocities were about 112.2cm/s-116.2cm/s at impact. Maximum ball velocities were appeared 0.08s-0.10s after impact no matter what the ground conditions are. Table tennis ball recorded higher ball velocities than the other ball velocities and iron ball recorded the lowest ball velocity in this group. But Table tennis ball was influenced with the frictional force and immediately was decreased at the artificial grass green condition. If an object is received the kinetic energy under the static condition(v=0cm/s), the object recorded the maximum velocity shortly after the impact and then decreased the velocity because of the frictional force. The ball distance from the start position to the peak velocity position is about 6cm-10cm under the 112.2cm/s-116.2cm/s putting velocity with putter. 0.25 seconds later after impact balls were placed 40cm distance from the original position except iron ball. In this study, ball moving distances were too short therefore it was not possible to investigate the reactions after the translational force is disappeared. Rotational force would play a major role at the end of the ball movement. Future study must accept two things. One is long distance movement of ball and the other is balanced ground. Three-piece ball is a good item to investigate the golf ball movement on the different surface conditions.