• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.20
• /
• pp.100-106
• /
• 1975

Germinating ability of green seed in maturing period was investigated to develop the technics on generation shortening. Rapeseed did not germinate until 40 days after flowering (=DAF) in green seed and 50 DAF in dried seed. Effective germination to be utilized for generation shortening came on 55 DAF for dried seed by heating and on 75 DAF for green seed. The periodic time of seed dormancy in maturing period had two cycles and rest period was considered that it was different according to the ecological types of early, middle and late maturity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.20
• /
• pp.107-114
• /
• 1975

To develop the technics of generation shortening for the breeding of rape oil composition. effect of the ethrel and hydroperoxide treatment for the increasing of germination ability during maturing period was investigated. It was the most effect ire for a generation shortening that the seeds after, 10 days treated with $H_2O$$_2$-0.5% and 2, 000ppm of ethrel and after 15 days treated with $H_2O$$_2$-0.5% and 500ppm of ethrel on 15 day after flowering were germinated 76% and 90% respectively. It suggested that effect of ethrel and hydroperoxide was multiple and 4-5 generations could pass in a year because one generation needed only 66-71 days.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.308-313
• /
• 1995

In relation to shortening generation by using embryo culture of barley immature seed, it is important to find out profitable embryo age for embryo culture and to understand the relationship among embryo and other characters. Two varieties(Olbori and Dusan #12) were cultivated under two growth conditions(15/10 and 25/15$^{\circ}C$). The embryos were aseptically excised when immature seeds were collected 9, 13, 17, 21, 25 and 29 days after heading and cultured on $B_5$ medium. On the 21st day after heading, the length of embryos from top or middle part of spike was longer than that from bottom part. Embryos from bottom part under low temperature condition had the shortest length. Shoot length, root length and root number after embryo culture were little difference among three parts of spike under high temperature condition. Under low temperature, seedlings from bottom part of spike were inferior to those from top or middle part. Length of 29-day-old embryos under low temperature condition was similar to that of 17-day-old ones under high. Under high temperature condition, the length of 17-day-old embryo had positive correlation with kernel width, shoot length, root length and root number, but that of 21-day-old one didn't have. Seventeen-day-old embryos obtained from 25/15$^{\circ}C$ growth condition seem to be efficient to shortening generation by using embryo culture.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.11a
• /
• pp.94-97
• /
• 2004

Study of a micro chemical plant consisted with droplet generation, digital sorting and separation was conducted. The droplet generation was quantitatively characterized. The digital sorting brought effective reaction by shortening the droplet size and the pitch of droplet generation simultaneously. To prevent the unfavorable higher order reaction, perfect separation of droplets was visualized.

• The Korean Journal of Physiology and Pharmacology
• /
• v.20 no.1
• /
• pp.119-127
• /
• 2016

Dihydropyridine (DHP) calcium channel blockers (CCBs) have been widely used to treat of several cardiovascular diseases. An excessive shortening of action potential duration (APD) due to the reduction of $Ca^{2+}$ channel current ($I_{Ca}$) might increase the risk of arrhythmia. In this study we investigated the electrophysiological effects of nicardipine (NIC), isradipine (ISR), and amlodipine (AML) on the cardiac APD in rabbit Purkinje fibers, voltage-gated $K^+$ channel currents ($I_{Kr}$, $I_{Ks}$) and voltage-gated $Na^+$ channel current ($I_{Na}$). The concentration-dependent inhibition of $Ca^{2+}$ channel currents ($I_{Ca}$) was examined in rat cardiomyocytes; these CCBs have similar potency on $I_{Ca}$ channel blocking with $IC_{50}$ (the half-maximum inhibiting concentration) values of 0.142, 0.229, and 0.227 nM on NIC, ISR, and AML, respectively. However, ISR shortened both $APD_{50}$ and $APD_{90}$ already at $1{\mu}M$ whereas NIC and AML shortened $APD_{50}$ but not $APD_{90}$ up to $30{\mu}M$. According to ion channel studies, NIC and AML concentration-dependently inhibited $I_{Kr}$ and $I_{Ks}$ while ISR had only partial inhibitory effects (<50% at $30{\mu}M$). Inhibition of $I_{Na}$ was similarly observed in the three CCBs. Since the $I_{Kr}$ and $I_{Ks}$ mainly contribute to cardiac repolarization, their inhibition by NIC and AML could compensate for the AP shortening effects due to the block of $I_{Ca}$.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.1
• /
• pp.11-16
• /
• 2005

CAD/CAM system may have such advantages of cost reduction, production time shortening, and product quality improvement. But current advanced versions of CAD/CAM system for 3-D NC data generation are too much expensive to purchase and too difficult to make full use for small-scale manufacturers whose main products are of 2-D simple shapes. The objective of this paper is to introduce a cost-effective way to 2-D NC data generation with a widely spread CAD software. Using VISUAL LISP in the well-known AUTO-CAD, the contents and steps of an automatic NC data generation program are presented for 2-D machining of contours and pockets. To approve the usefulness of program, a test application to a real part is exhibited also.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.83-90
• /
• 2004

This paper proposes a tool path generation method for machining impellers with 5-axis machining center. The shape of impeller is complex, being composed of pressure surface, suction surface and leading edge, and so on. The compound surface which is made of ruled surface such as pressure surface and suction surface and leading edge such as fillet surface, makes the tool path generation much complicated. To achieve efficient roughing, cutting area is divided into two region and then tool radius of maximum size that do not cause tool intereference is selected for shortening machining time. In finishing, accuracy is improved using side cutting for blade surface and point milling for leading edge.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.1
• /
• pp.3-9
• /
• 2009

Recently, a high speed cutting is essential requirement to satisfy latest demand of high precision product and machining of hard materials. However heat generation by high speed rotation causes many problems. The machining error and shortening spindle lifetime by thermal stress is typical example. Generation of heat is mostly caused by sliding at the rotor and bearing. For minimization of heat generation at bearing, decision of the condition of proper lubrication is necessary. The thermal study about 40,000rpm spindle by changing the condition of oil-air lubrication method is carried out in this paper. The results of this paper can be used effectively in the decision of oil-air lubrication condition of other types of spindle for machine tools.

• Journal of Information Processing Systems
• /
• v.2 no.3 s.4
• /
• pp.189-193
• /
• 2006

In this study we propose an automatic reading system for diagnostic DNA chips. We define a general specification for an automatic reading system and propose a possible implementation method. The proposed system performs the whole reading process automatically without any user intervention, covering image acquisition, image analysis, and report generation. We applied the system for the automatic report generation of a commercialized DNA chip for cervical cancer detection. The fluorescence image of the hybridization result was acquired with a $GenePix^{TM}$ scanner using its library running in HTML pages. The processing of the acquired image and the report generation were executed by a component object module programmed with Microsoft Visual C++ 6.0. To generate the report document, we made an HWP 2002 document template with marker strings that were supposed to be searched and replaced with the corresponding information such as patient information and diagnosis results. The proposed system generates the report document by reading the template and changing the marker strings with the resultant contents. The system is expected to facilitate the usage of a diagnostic DNA chip for mass screening by the automation of a conventional manual reading process, shortening its processing time, and quantifying the reading criteria.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.351-354
• /
• 2005

Research purpose of this project is intending Maintenance Free of freight car and speed up of freight train. At goods transport as heightening traveling by ship speed of freight train shortening raise railway share of physical distribution and stand on tiptoe to Northeast Asia physical distribution main country to contribute expect. This paper is the performance elevation methods of next generation railway freight vehicles.