• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.353-358
• /
• 2010

High pressure gas is a widely used storage mode for hydrogen fuel. A typical hydrogen tank that is charged with hydrogen gas can function as a hydrogen supply source in a large number of applications. The filling process of a high-pressure hydrogen tank should be reasonably short. However, when the fill time is short, the maximum temperature in the tank increases. Therefore the process should be designed in such a way to avoid high temperatures in the tank because of safety reasons. The paper simulates the fast filling process of hydrogen tanks using Computational Fluid Dynamics method. The local temperature distribution in the tank is obtained. Results obtained are compared with available experimental data. Further work is going on to improve the accuracy of the calculations.

• Journal of Mechanical Science and Technology
• /
• v.19 no.6
• /
• pp.1378-1389
• /
• 2005

This work provides the fundamental knowledge of energy transport characteristics during very short-pulse laser heating of semiconductors from a microscopic viewpoint. Based on the self-consistent hydrodynamic equations, in-situ interactions between carriers, optical phonons, and acoustic phonons are simulated to figure out energy transport mechanism during ultrafast pulse laser heating of a silicon substrate through the detailed information on the time and spatial evolutions of each temperature for carriers, longitudinal optical (LO) phonons, acoustic phonons. It is found that nonequilibrium between LO phonons and acoustic phonons should be considered for ultrafast pulse laser heating problem, two-peak structures become apparently present for the subpicosecond pulses because of the Auger heating. A substantial increase in carrier temperature is observed for lasers with a few picosecond pulse duration, whereas the temperature rise of acoustic and phonon temperatures is relatively small with decreasing laser pulse widths. A slight lagging behavior is observed due to the differences in relaxation times and heat capacities between two different phonons. Moreover, the laser fluence has a significant effect on the decaying rate of the Auger recombination.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.19
• /
• pp.25-30
• /
• 1989

This study is concerned with a job sequencing method using the concept of sampling technique. This sampling technique has never been applied to develop the scheduling algorithms. The most job sequencing algorithms have been developed to determine the best or good solution under the special conditions. Thus, it is not only very difficult, but also taken too much time to develop the appropriate job schedules that satisfy the complex work conditions. The application areas of these algorithms are also very narrow. Under these circumstances it is very desirable to develop a simple job sequencing method which can produce the good solution with the short tine period under any complex work conditions. It is called a sampling job sequencing method in this study. This study is to examine the selection of the good job sequence of 1%-5% upper group by the sampling method. The result shows that there is the set of 0.5%-5% job sequence group which has to same amount of performance measure with the optimal job sequence in the case of experiment of 2/n/F/F max. This indicates that the sampling job sequencing method is a useful job sequencing method to find the optimal or good job sequence with a little effort and time consuming. The results of ANOVA show that the two factors, number of jobs and the range of processing time are the significant factors for determining the job sequence at $\alpha$=0.01. This study is extended to 3 machines to machines job shop problems further.

• Transactions of Materials Processing
• /
• v.8 no.1
• /
• pp.22-28
• /
• 1999

The explicit and implicit time integration methods are applied effectively to analyze sheet metal stamping processes, which include the forming stage and the springback stage consecutively. The explicit time integration method has better merits in the forming stage including highly complicated three-dimensional contact conditions. By contrary, the implicit time integration method is better for analyzing springback since the complicated contact conditions are removed and the computing time to get the final static state is short. In this work, brief descriptions of the formulation and the factor study for springack simulations are presented. Further, the simulated results for the S-rail and the roof panel stamping processes are shown and discussed.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.308-313
• /
• 2003

Thermal mass flow meters (TMFMs) are most widely used for measuring mass flow rates in the semiconductor industry. A TMFM should have a short response time in order to measure the time-varying flow rate rapidly and accurately. Therefore it is important to study transient heat transfer phenomena in the sensor tube of a TMFM that is the most critical part in the TMFM. In the present work, a simple numerical model for transient heat transfer phenomena of the sensor tube of a TMFM is presented. Numerical solutions for the tube and fluid temperatures in a transient state are obtained using the proposed model and compared with experimental results to validate the proposed model. Based on numerical solutions, heat transfer mechanism in a transient state in the sensor tube is explained. Finally, a correlation for predicting the response time of a sensor tube is presented. The correlation is verified by experimental results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06a
• /
• pp.1-8
• /
• 1998

The explicit and implicit time integration methods are applied effectively to analyze sheet metal stamping processes, which include the forming stage and the springback stage consecutively. The explicit time integration method has better merits in the forming stage including highly complicated three-dimensional contact conditions. By contrary, the implicit time integration method is better for analyzing springback since the complicated contact conditions are removd and the computing time to get the final static state is short. In this work, brief descriptions of the formulation and the factor study for springback simulations are presented. Further, the simulated results for the S-rail and the roof pannel stamping processes are shown and discussed.

• Computers and Concrete
• /
• v.31 no.2
• /
• pp.85-95
• /
• 2023

Natural pozzolans are used as additives in cement to develop more durable and high-performance concrete. Pozzolanic activity index (PAI) is important for assessing the performance of a pozzolan as a binding material and has an important effect on the compressive strength, permeability, and chemical durability of concrete mixtures. However, the determining of the 28 days (short term) and 90 days (long term) PAI of concrete mixtures is a time-consuming process. In this study, to reduce extensive experimental work, it is aimed to predict the short term and long term PAIs as a function of the chemical compositions of various natural pozzolans. For this purpose, the chemical compositions of various natural pozzolans from Central Anatolia were determined with X-ray fluorescence spectroscopy. The mortar samples were prepared with the natural pozzolans and then, the short term and the long term PAIs were calculated based on compressive strength method. The effect of the natural pozzolans' chemical compositions on the short term and the long term PAIs were evaluated and the PAIs were predicted by using multiple linear regression (MLR) and adaptive neuro-fuzzy inference system (ANFIS) model. The prediction model results show that both reactive SiO₂ and SiO₂+Al₂O₃+Fe₂O₃ contents are the most effective parameters on PAI. According to the performance of prediction models determined with metrics such as root mean squared error (RMSE) and coefficient of correlation (R²), ANFIS models are more feasible than the multiple regression model in predicting the 28 days and 90 days pozzolanic activity. Estimation of PAIs based on the chemical component of natural pozzolana with high-performance prediction models is going to make an important contribution to material engineering applications in terms of selection of favorable natural pozzolana and saving time from tedious test processes.

• Journal of the Korean Society for Library and Information Science
• /
• v.10
• /
• pp.3-37
• /
• 1983

1. Library practice education in Korea is in the form of field experience, that is, Practicum, which is one type of field experience. 2. The practicum is a short-term work experience guided by the academic institutions. (2 to 6 weeks of full time employment in a library, or one to two semesters of approximately 10 to 12 hours weekly) 3. Field work is largely accepted as a required subject. 4. Field work is usually carried out during the first semester of senior year. (or of sophomore year in junior college) 5. Libraries in other universities (or in other institutions) can beused for a student's field work. But the current tendency is to use his or her own university's library. 6. Most universities give one credit for 2 weeks' field work. 7. The method of evaluation is strict: A or 'excellent' (above 90), B or 'good' (above 80), C or 'fair' (above 70), D or 'bad' (above 60). 8. The expense of field work is usually included in the tuition fees. However, some think that an additional fees should be collected in the case of special practice. 9. Respondents to my survey say that the field experience is necessary so that professional librarians can connect theory and practice. 10. They also indicate that there are some problems in library practice education: administrative difficulties in the department chairman's office, the burden on professors in the library being used, and the limited number of libraries in which the field work is practicable. 11. The Department of Library Science is responsible primarily for providing faculty supervision over the students, and secondarily for the preparation of evaluation cards and field work reports. 12. Most of the faculty respondents use evaluation cards for the field work, some of which serve as grade sheets, some as field work diaries, and some as field work reports.

• Quality Improvement in Health Care
• /
• v.5 no.1
• /
• pp.28-40
• /
• 1998

Background : Many patients have been frequently complaining that they have to spend couples of hours in hospital on visiting outpatient clinic. Among several steps, two major time consuming steps were waiting to see a doctor and/or waiting at pharmacy to get medicine. Therefore not only to provide the proper guidance for medication or counseling on health affairs but also to make waiting time short is very important for the better hospital services. The aim of this study is to validate several time-saving processes to reduce waiting time at outpatient pharmacy and its efficacy. Methods : We surveyed the time interval actually taken to receive medicine after issuing prescription by doctors, and analyzed the data on the bases of relevant or possible causative factors. Then following processes were given to reduce waiting time and resurveyed and compared both data to validate efficacy of those processes : 1. No work-off on Monday and Tuesday 2. Work hour shift to start 30 minutes earlier 3. Changeable work shift between outpatient pharmacy and ward pharmacy according to work load 4. Use of pre-made medicines prescribed more frequently by certain doctors at certain time 5. Cooperation with doctors to use set prescriptions. Results : Before the process, mean waiting time at pharmacy was 29.2 minutes and most time consuming period was from noon to 1 PM, 3 to 4 PM, 1 to 2 PM in order of frequency. Only 37.7 % of patients could get the medicine within 20 minutes. Three times of surveys after process showed mean waiting time at pharmacy were 18.1 minutes, 19.0 minutes, and 17.6 minutes, respectively. And 72.7 %, 81.3%, and 82.2% of patients could get the medicine within 20 minutes. Conclusion : The mean waiting time was markedly reduced with above mentioned processes which applied intradepartmently event hough with little cooperation from other department. Consequently, the complaints of patients were decreased with increasing the satisfaction degree. In conclusion, those suggestions were recommanded to improve the degree of satisfaction of patients.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.805-810
• /
• 2019

We present a time-frequency analysis algorithm based on the multitaper method and the state-space frameworks. In general, time-frequency representations have a trade-off between the time duration and the spectral bandwidth by the uncertainty principle. To optimize the trade-off problems, the short-time Fourier transform and wavelet based algorithms have been developed. Alternatively, the authors proposed the state-space frameworks based on the multitaper method in the previous work. In this paper, we develop a real-time algorithm to estimate variances and spectrum using the state-space framework. We test our algorithm in spectral analysis of simulated data.