• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.1
• /
• pp.19-23
• /
• 2010

This study is to develop power line communication and short-range wireless communication system using LED. I will create optical receiver and transmitter using LED and optical sensor and connectors for display device and communication in receiver and transmitter were created. Experiment method is to signal and waveform through oscilloscope date from optical sensor after chosen a highly efficient LED. In addition, reception and transmitter of smoothly data using visible light communication program were checked. I will compliment problems through this experiment and constantly study, improve on power loss.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.1 no.2
• /
• pp.82-89
• /
• 2006

It appears that it is possible for us to make a wireless communication of even home-network system within car by integrating with the Ubiquitous such as mobile phone, wireless Internet, GPS and DMB in the future. If the present wireless surroundings within the car are connected with very high-speed wireless network as measurement system for wireless communication surroundings within this car in the future, it will develop the complicated communication conditions such as safe checkup, communication between systems within car, and wireless communication for user entertainment unlike universal communication conditions. Accordingly, there is the necessity of the device that can measure the interference of electric wave, communication speed and communication quality by a kind of each car. This paper aims at making the real measurement device to raise the reliability of each Application for inquiring into the interference about each other in the frequency band used under Telematics surroundings.

• Electronics and Telecommunications Trends
• /
• v.34 no.6
• /
• pp.61-70
• /
• 2019

Recently, research and development for next-generation mobile communication and short-range wireless communication has begun worldwide along with the provision of commercial services of 5G mobile communication technology. In response to this trend, the THz band has attracted considerable attention as a frequency band for transmitting 100 Gbps of large-capacity wireless data. For communication in the THz band, research and development of approaches based on photonics and electronics is being actively performed; the configurations, characteristics, and performances of these two methods for THz transmission have been seriously examined. Among them, we reviewed the technical issues in implementing THz wireless transmission technology using photonics technology. We also introduced the Electronic and Telecommunications Research Institute's (ETRI) development of photonics-based THz short-range transmission technology starting from 2019 and including some initial results. In the near future, 100 Gbps high-capacity wireless data transmission technology utilizing photonics technology is expected to be commercially available and applied to various applications, such as 3D hologram transmission, uncompressed large capacity medical data transmission, and multiple augmented reality/virtual reality (AR/VR).

• Journal of Korea Multimedia Society
• /
• v.20 no.9
• /
• pp.1519-1526
• /
• 2017

The existing DSRC(Dedicated Short Range Communication) scheme has a limitation in providing various services through short-range wireless communication. Therefore, it is necessary to develop an intelligent WAVE/DSRC hybrid wireless platform that can improve data transmission speed and extend the effective communication range. This paper introduces WAVE/DSRC integrated platform technology using WAVE(Wireless Access in Vehicle Environments) to overcome the disadvantages of DSRC. First, the desinged software configuration of the WAVE/DSRC integrated platform is described. Then each task operation scheme and WAVE software design are described. By applying the WAVE/DSRC integrated platform, we can compensate the shortcomings of DSRC. It can provide more accurate and reliable services.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.632-638
• /
• 2012

ZigBee network, based on PHY, MAC layer provides a specification for a suite of high level communication protocols using small, low-power digital radio based on an IEEE 802.15.4 standard. Meshing is a type of daisy chaining from one device to another. This technique allows the short range of an individual node to be expanded and multiplied, covering a much larger area. Each wireless technology that makes it to market serves a special purpose or function. Zigbee provides short-range connectivity in what is called a personal-area network (PAN). Within ZigBee PAN coordinator as manages an entire ZigBee network, the short range of frequency band was only selected because the technology allows typically less than 100 kbp or ZigBee troubles in retransmission processing and delaying data tranmission works to create unproductive condition of work. This research was proposed the method, based on short range frequency of zigBee nodes enable to long range of remote data transmission with specific algorithm tools.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.135-142
• /
• 2012

DSRC system is a communication system that consists of road side equipment and on board equipment to provide services of communication technology for intelligent transportation systems. In this paper, we carry out a short-range dedicated high-speed wireless communications via DSRC system based on board equipment that is installed in the vehicle and road side equipment through wireless channels of communication. on board equipment is system that have a memory which initialization information is stored, it loads physical layer and MAC layer, LLC layer, L7 layer in turn. In the upper, it should analyze the various commands that are sent from roadside base stations, and carry out the operation which is in accordance with the command. and also it designs the structure of protocol stack which is TRM Layer loaded that is to initialize on L7 layer and MAC layer and efficiently designs operation between on board equipment and the road side equipment.

• Journal of Korean Port Research
• /
• v.14 no.3
• /
• pp.313-319
• /
• 2000

In this paper, we proposed the model of wireless communication for ACTS using DSRC and the DSRC system for T/C. The proposed wireless communication model is how to join with DSRC and other wireless communication in port. The DSRC system for T/C is the first application to the unit of port Facilities Automation on stacking area. The DSRC system is communicated between OBE and RSE using 5.8Hz ISM band frequency. The previous works of DSRC applications are gate automation. In these cases, the road trackers are difficult to obtain information of the port in the stacking area. So we used the DSRC for the wireless communication for the port Facilities Automation. Using DSRC, the load trackers obtain more information in the port and contacts to ITS on back-roads of port. The proposed communication system is serviced to reelection of port statistics.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.3
• /
• pp.180-184
• /
• 2007

Bluetooth is a standard for short range, low power, low cost wireless communication that uses radio technology. This paper presents an overview of Bluetooth communication the following article will focus on the formation of Bluetooth scatter nets and some proposed scatter net models.

• Journal of Digital Contents Society
• /
• v.7 no.3
• /
• pp.139-145
• /
• 2006

Short-range wireless transmission and networking technologies are becoming increasingly important in enabling useful mobile applications. Bluetooth and IEEE 802.11b standards are the most commonly deployed technologies for WPAN and WLAN. This paper investigates the effect of short range wireless channel on the performance of MC-CDMA/BPSK system and Bluetooth GFSK signal transmission in AWGN and Rician fading environments. And we investigate performance degradation due to interference effects in short range wireless channel. We firstly derive a equation for the bit error probability in additive white Gaussian noise depending on MC-CDMA/BPSK signal and GFSK modulation signal parameters according to the Bluetooth RF standard. Then, from this error rate expression we calculate the mean error probability for MC-CDMA/BPSK signal and Bluetooth GFSK signal in Rician fading and interference channel. In particular, the impacts of the Rician fading depth and interference level on the error probability is shown in BER performance figures.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.231-236
• /
• 2020

In today's society, the majority of people use smartphones, and mobile ordering and payment systems for their convenience are gaining their attention. The mobile payment market is on the rise, with over 71% of the market that is already formed in China. Many mobile payment markets are growing in Korea, which is a system that is provided only in large franchises. In this paper, we propose a mobile ordering and payment system using short-range wireless communication technology that can be easily used not only in franchises but also in the small businesses, and for the convenience of users in modern society to make a system that enables ordering and payment through mobile to communicate between the devices developed by short range wireless communication technology, smartphone and the main server.