• Journal of Environmental Health Sciences
• /
• v.9 no.1
• /
• pp.31-47
• /
• 1983

This study was performed to investigate how much chemical constituents are contained and to what extent they are spread in the major streams running through Taegu City, i. e.: Yeechun, Beomeo, Chilsung, Dalseo, during the seven months Period between March to September, 1982. Nine constituents, pH, DO, COD, T-N, $NH_4-N, NO_2-N, NO_3-N, Cl^-, SO_4--$ and $PO_4-P---$, were found to be-contained in those streams. The results of the survey are summarized as follows. 1) Each chemical constituent detected in the five streams has the following variation range. pH(7.0-9.10), DO (ND-7.46ppm), COD (5.4-173ppm), T-N(13-42ppm), $NH^+_$-N$ (10.2-32.2ppm), $NO^-_2-N$ (0.007-2.53ppm), $NO^-_3-N$ (0.005-2.16ppm), $Cl^-$ (150-469 ppm), $SO_4^{3-}$ (71-1000ppm), $PO_4^{3-}-P$ (0.9-53ppm) The amount of all the constituents except pH, and $NO_3-N$, exceeded the standard value allowed for drinking, farming, and industrial water. 2) The monthly variation in the amount of each constituent differs according to the station from which it was sampled, but in general, the amount increased during the season from March to July when the rainfall was little while it decreased in August when the rainfall was abundant. 3) A statistical analysis of the constituents shows positive correlations that T-N and $NH^+_4-N$, water temperature and $NO^-_3-N$, but there were no ones beween the COD and $NH^+_4-N$ 4 ) The degree of COD pollution in each stream is in the following order. Kongdan, Yeechun, Beomeo, ChiLsung, and Dalseo. 5) Five major streams in Taegu City, Yeechun, Beomeo, Chilsung Dalseo, and Kongdan, are so narrow in width and so short in length that they flow into the Sincheon river or the Gumho river without undergoing self-purification. The increase in population and various kinds of industrial pollutants make the supply insufficient and water pollution inevitable. 4 ) The degree of COD pollution in each stream is in the following order. Kongdan, Yeechun, Beomeo, ChiLsung, and Dalseo.

• Current Photovoltaic Research
• /
• v.3 no.1
• /
• pp.32-38
• /
• 2015

CIGS solar cell consisted of various films. In this research, we investigated electrode materials in $Cu(In,Ga)Se_2$ (CIGS) cells, including Al-doped ZnO (ZnO:Al), intrinsic ZnO (i-ZnO), and Al films. The sputtered ZnO:Al film with a sputtering power at 200W showed the lowest series resistance and highest cell efficiency. The electrical resistivity of the 200-W sputtered ZnO:Al film was $5.2{\times}10^{-4}{\Omega}{\cdot}cm$ by the rapid thermal annealing at $200^{\circ}C$ for 1 min. The electrical resistivity of i-ZnO was not measurable due to its high resistance. But the optical transmittance was highest with less oxygen supply and high efficiency cell was achieved with $O_2/(Ar+O_2)$ ratio was 1% due to the increase of short-circuit current. No significant change in the cell performance by inserting a Ni layer between Al and ZnO:Al films was observed.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.1
• /
• pp.92-98
• /
• 2013

Microalgal cultivation using wastewater is now regarded as essential for biodiesel production, as two goals can be achieved simultaneously; that is, nutrient removal efficiency and biomass production. Therefore, this study examined the effects of carbon sources, the N:P ratio, and the hydraulic retention time (HRT) to identify the optimal conditions for nutrient removal efficiency and biomass production. The effluent from a 2nd lagoon was used to cultivate microalgae. Whereas the algal species diversity and lipid content increased with a longer HRT, the algal biomass productivity decreased. Different carbon sources also affected the algal species composition. Diatoms were dominant with an increased pH when bicarbonate was supplied. However, 2% $CO_2$ gas led to a lower pH and the dominance of filamentous green algae with a much lower biomass productivity. Among the experiments, the highest chlorophyll-a concentration and lipid productivity were obtained with the addition of phosphate up to 0.5 mg/l P, since phosphorus was in short supply compared with nitrogen. The N and P removal efficiencies were also higher with a balanced N:P ratio, based on the addition of phosphate. Thus, optimizing the N:P ratio for the dominant algae could be critical in attaining higher algal growth, lipid productivity, and nutrient removal efficiency.

• Economic and Environmental Geology
• /
• v.5 no.4
• /
• pp.221-229
• /
• 1972

Through the series of study on the above subjects, the following were founded. 1. Soluble silica in paddy top-soil (xppm) and maxium possible yield (y) is expressed as following equatic $y=63.97+0.425x-0.00114x^2$ It is known that soluble silica in paddy top-soil in South Korea is limited as 130ppm. 2. Gnder the present Korean condition 90% of paddy-top-soil is estimated to be short in available silica content and the country average to only 78ppm. 3. The total area of Korean paddy-top-soil is about 1,036,710 ha. All requirements of wollastonite in South Korea estimated from the equation $Y=0.94-0.033{\times}$are about 2 million M/T 4. Silicates fertilizer minerals are Bentonite, Zeolite, Wollastonite, Serpentine, and Chlorite. But Wollastonite is most economic and can be supplied to using Korea. 5. Wollastonite is formed in contact metomorphic deposits. Limestone is the country rock of wollastonite. Limestone in Korea is in Ryunchcon system, (Pre-cambrian) Okcheon system, (unknown), Great limestone series (paleozoic), Hongjum series (Paleozoic) and Kyungsang system (mesozoic) so that the zones of these limestone and igneous rock are the possible area which wollastonite can be produced. 6. According to the published geologic map (scale 1/5000), about 25 provinces will be possible area which wollastonite can be produced. In future, I believe that many possible area will be increased. 7. According to this survey at Danyang, total wollastonite resources are about 179,000 M/T and average of soluble $SiO_2$ is 29.84%. 8. According to this survey at Daijeon, total resources are about 57,600 M/T and average of soluble $SiO_2$ is 21.53%. 9. Total wollastonite resources including Danyang, Yangduk, and Daijeon are about 1,172,200 M/T. Considering possible resources, it will be over 20 million M/T and I can say that it is possible to be supply for a score.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.2
• /
• pp.178-183
• /
• 2012

The design of the integrated quench protection (QP) system for the high current superconducting magnet (SCM) has been fabricated and tested for the toroidal field (TF) coil system of the Korea Superconducting Tokamak Advanced Research (KSTAR) device. The QP system is capable of protecting the TF SCM, which consists of 16 identical coils serially connected with a stored energy of 495 MJ at the design operation level at 35.2 kA per turn. Given that the power supply for the TF coils can only ramp up and maintain the coil current, the design of the QP system includes two features. The first is a basic fast discharge function to protect the TF SCM by a dump resistor circuit with a 7 s time constant in case of coil quench event. The second is a slow discharge function with a time constant of 360 s for a daily TF discharge or for a stop demand from the tokamak control system. The QP system has been successfully tested up to 40 kA with a short circuit and up to 34 kA with TF SCM in the second campaign of KSTAR. This paper describes the characteristics of the TF QP systems and test results of the plasma experiment of KSTAR in 2009.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3385-3390
• /
• 2015

In this paper, we constructed using a Cortex M3 microcontroller developed by ARM Inc. as a way to control the LED light more efficiently. And Using the short-range wireless communication by the Bluetooth communication method applied to control the LED light was configured to wirelessly control the wireless circuits. In this paper, users can easily download and easy to wirelessly control the LED lighting control circuit to design an Android application from Android-based smartphone so that you can control with your smartphone to have anyone to control the LED lighting control circuit wirelessly. If the LED lights radio control circuit is configured with the Cortex M3 in this paper is applicable to both indoor and outdoor and eco-friendly technology, is using LED driver to enhance the efficiency of the LED becomes stable voltage supply is made, the brightness of LED lighting control.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.448-456
• /
• 2011

In this paper, we proposed a LED driver that allows to use a long lifetime MLCC with small voltage capacity to replace the electrolytic condenser that has been used at the output part by storing only the voltage fluctuation due to temperature variation in the output condenser. The proposed LED driver can allow to use a long lifetime MLCC with small power loss as the output condenser instead of the conventional electrolytic condenser with short lifetime because it stores only the voltage fluctuation due to the temperature variation of the LED light source in the output condenser by connecting the output condenser with the input power supply in series in the basic topology of the conventional boost DC/DC converter. In this study, we performed a simulation to verify the conventional DC/DC converter and the proposed DC/DC converter. It was shown that the DC/DC converter proposed through the experiment allows to use MLCC as the output condenser and the efficiency can be improved.

• Archives of Plastic Surgery
• /
• v.37 no.6
• /
• pp.769-774
• /
• 2010

Purpose: As the soft tissue defect around the knee is difficult to reconstruct, local flap or free flap is used. Distally based anterolateral thigh pedicled flap introduced by Zhang uses sufficient reverse flow supplied from the vascular network around the knee. We report successful reconstruction of defect around knee by this method. Methods: Four patients with skin & soft tissue defect around knee have been treated for reconstruction using the distally based anterolateral thigh pedicled flap. First, the doppler was used to check the perforator flap of the descending branch of the lateral circumflex femoral artery and to draw and dissect the perforator flap as much as needed. After the dissection, the proximal of the descending branch was clamped and checked for sufficient supply of blood flow from the reverse flow and then ligated. It was dissected along the descending branch and in order to prevent damage to the joined parts of the descending branch and the lateral superior geniculate artery, a more careful ligation was done starting from 10 cm superior to the knee. The defect was reconstructed after securing enough vascular pedicle to cover all the damaged parts. Results: Not all patients suffered from flap necrosis. In case of the patient with chronic osteomyelitis, slight venous congestion was observed right after the surgery but it disappeared the following day. All three patients had no occurences of additional complications. Conclusion: Distally based anterolateral thigh pedicled flap was enough to provide large flap for knee reconstruction. It had sufficient blood flow and vascular pedicle. It also had taken short operation time compared to the free flap operation. The distally based anterolateral thigh pedicled flap used by the authors is a very useful way of reconstructing the area around knee.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.182-188
• /
• 2015

An analog AVR has an advantage of short time constant, time to revert again from the abnormal state to a stable one depending on the voltage fluctuations of the load. But the Analog AVR has a disadvantage of large voltage variation according to the load fluctuation. Voltage regulation for digital AVR is very stable, but the time constant is very long compared to that of an analog AVR. Therefore, it indicates that the digital AVR shows unstable output performance in a very large load variations. In this paper, a mixed form of an analog AVR and a digital AVR is proposed. An implemented hybrid AVR has fast time constant and stable voltage regulation capability. Hybrid AVR voltage variations in the load is stable within 1[%] and the voltage stability is also improved. It also showed fast time constant to the level of the analog AVR. Thus hybrid AVR developed in this paper can be used as a power supply for a variety of uses in industry.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.641-647
• /
• 2007

It has been said that Warehouse Management System(WMS) in e-Trade has considerably contributed to improvement of distribution industry. However, in the aspect of management we have many technical problems such as transportation due to tremendous demands of online data. Therefore, for Korea to be a hub of distribution and information, this is the best time to prepare the foundation of Supply Chain Management(SCM) under Enterprise Resource Planning (ERP) the and make a good use of WMS. The purposes of this study are presented as follows: First, it is to examine the general flow process of WMS in each field of our e-Trade Second, it is to present problems and plans of improvements involved in WMS in e-Trade. In short, this study aims at presenting interpretative foundation of WMS in a practical viewpoint, not presenting technical directions of WMS.