• Journal of the Korean Geotechnical Society
• /
• v.29 no.1
• /
• pp.71-80
• /
• 2013

Before and after the test constructions, and after an 11-month hiatus from the pilot pile installations, the in-situ tests (CPT, SPT) were carried out at the ground adjacent to the noise- and vibration-free screw concrete piles installed by 2 kinds of construction methods (i.e., the toe-jetting shoe type, the pre-digging type). In the toe-jetting shoe type construction methods, after construction, the soil strength within 3.5D (where, D = pile diameter) from the pile center decreased greatly by about 46% of the original ground and, after an 11-month hiatus, a strength recovery adjacent to the piles appeared about 71% of the original ground. In the pre-digging type construction methods, a strength recovery adjacent to the piles appeared 100% of the strength of the original ground.

• Journal of Drive and Control
• /
• v.12 no.2
• /
• pp.21-26
• /
• 2015

In order to design a swash plate type pump for electro-hydrostatic actuators the performance of the hydrostatic piston shoe bearings in the low speed range needs to be examined, since the pump operates frequently at low speeds, compensating for position control errors as a control element. As a common practice, piston shoes are equipped with inner rings as an auxiliary element to enhance their tribological performance. In this paper, the effects of the inner rings of the piston shoes on the frictional loss and leakage flow rate were investigated, where three piston shoe models, with different inner ring shapes and different inlet orifice sizes, were integrated. The test results showed that a large inner ring and small inlet orifice were advantageous for reducing both the frictional loss and leakage flow rate; this could also be confirmed by computational analyses.

• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.25-31
• /
• 2014

This paper details application of a DLC(Diamond Like Carbon)-coating to the swash plate and the ball joint of pistons that make sliding contact with the piston shoes of an axial piston pump. This process, aimed to reduce the frictional and leakage power losses of the hydrostatic piston shoe bearings at the low speed range. At lower speeds than 100rpm, the positive effects of the DLC-coating on the power loss reduction of the hydrostatic piston shoe bearings could be confirmed. These effects resulted in little improvement in volumetric efficiency of the test pump, but the mechanical efficiency could be raised by up to 5% at 100rpm; here, the DLC-coated swash plate played a more dominant role than the DLC-coated ball joint.

• The Research Journal of the Costume Culture
• /
• v.24 no.3
• /
• pp.315-323
• /
• 2016

The present study is intended to study sole types necessary for shoe designs for elementary school students that are in age groups in growth periods, and 3D midsole design utilizing 3D printing technology. This study analyzed data from the 3D measurement of the feet of 1,227 elementary school students aged 7-13 years residing in the capital region conducted as part of the 6th Anthropometry of Size Korea. In addition, 3D midsoles by sole type were designed utilizing a Rhino CAD, and midsole prototypes were output utilizing a Zortrax-M200 3D Printer. Through a cluster analysis of sole shapes by type, sole shapes were classified into three types. Type 1 has small values of foot lengths and foot breadths, with large toe 1 angles and high arch heights. Type 2 has intermediate values of foot lengths and foot breadths, with small toe 1 angles and high arch heights. Type 3 has large values of foot lengths and foot breadths with small toe 1 angles and low arch heights. On reviewing the results of design of 3D midsoles by sole type, it can be seen that the midsoles were designed according to characteristics by sole type. The results of the sole type analysis in the present study are expected to be meaningful as basic data for the development of shoe insoles for elementary school students.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.109-114
• /
• 2005

In this study, to develop a flash-less mold for forming of shoe-midsole, experiments and forming analysis were carried out. In order to reduce the extra-materials, the final preform has been modified by the experiment of pressure forming at the room temperature. To measure the contact status of parting surface of mold, the pressure film has been used. The midsole mold of the wedge structure type has been developed for the improvement of the contact status. The vertical pressing mold structure was introduced for the production of a flash-less midsole. By the investigation, flash of shoe-midsole was considerably reduced.

• Journal of Families and Better Life
• /
• v.26 no.2
• /
• pp.83-101
• /
• 2008

This research performs a multi comparison between the age of old households and the economic structure according to accommodation type as well as analyzing the economical structural difference of each type based on the features of aged households. The paper classified aged households into 3 groups according to age distribution. The economic structure analysis according to the age of old households and accommodation type was shown as follow: First, the economical structural analysis based on the age of old households showed a statistical difference in the total, labor, business, property and transfer income variables according to the age of each sample group. However, the non-business income and liabilities did not show a significant difference. Second, in the analysis of different economic earnings and initial expenses of middle-aged households according to the age distribution group showed a disparity in the total, labor, business, property, and transfer income variables according to the age of each sample group. However, aged households showed a statistical difference in total, labor, business and transfer income variables. Third, in the analysis of difference in the expense provision and size of consumption, there was a statistical difference in the expense variables of total consumption, food, dining out, electricity, water, furniture, kitchen supplies, clothing, shoe, education, culture, entertainment, transportation, and communication. Fourth, in the analysis of difference in the size of consumption expense, the initial and middle-aged households showed a statistical difference in the total consumption, food, dining out, electricity, water, furniture, kitchen supplies, clothing, shoe, education, culture, entertainment, transportation, communication, and consumption expense variables. However, the analysis of aged households has shown a statistical difference in the total consumption, food, dining out, electricity, water, furniture, kitchen supplies, clothing, shoe, education, culture, entertainment, transportation, and communication expense variables. The study found a statistical difference in the expense for hygienics that did not appear in the initial and middle-aged households.

• The Research Journal of the Costume Culture
• /
• v.17 no.1
• /
• pp.68-75
• /
• 2009

The purpose of this study is to find the relationship between women's shoes wearing trait and their foot shape. 203 women in their twenties were participated in the experiment. The subjects' feet were measured with a 3D foot scanner and their foot shapes were classified into five types by factor analysis and cluster analysis in the previous study. In addition to the five foot types, three foot types classified by foot index were also utilized for this study. This study analyzed the trait of their shoe wearing and the areas of discomfort on the foot when they wore shoes. The results of the experiment show that the size of shoe size-foot size mismatching and the foot areas of discomfort wearing shoes were differentiate by foot types. It shows that the subjects with long foot, wide fore foot shape, or fore foot angle deformity wore larger size shoes than their foot size. The foot areas of discomfort with wearing shoes were different according to the foot types. Subjects with wide fore foot shape or fore foot angle deformity had discomfort at the front shoe area. The subjects with straight toes had the least discomfort. The foot discomfort areas differentiated according to foot index type. The foot types with wide ball width experienced discomfort at the front of the ball and the top of the foot.

• International Journal of Contents
• /
• v.6 no.1
• /
• pp.41-46
• /
• 2010

The aim of this study was to investigate the effect of different shoe-heel heights on the surface electromyographic (EMG) activity of vastus medialis (VM) and vastus lateralis (VL) during treadmill walking in female patients with patellofemoral pain (PFP). Nineteen women with PFP participated in this research. EMG signals were recorded from the VM and VL of both sides and were compared during the treadmill walking. The subjects walked on a treadmill wearing shoes of three different heel heights: 1 cm, 3 cm and 7 cm. Each subject walked on a treadmill for five minutes at a speed of 2 km/hour with three minutes resting intervals between consecutive trials. The data were analyzed by one-way repeated-measures analysis of variance. The results of the present study indicate that EMG data of the VM and VL of female patients with PFP did improve with an increase in the height of the shoe heel, which were statistically significant. Additionally, the EMG activity of VM increased more dramatically than that of VL associated with the task of walking with high-heeled shoes on the treadmill. This study suggests that the type of high-heeled shoes is related to the VM and VL muscle activation patterns contributing to knee joint pathologies in female patients with PFP.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2899-2905
• /
• 2015

This paper presents is a study on the pressure distribution families low in response to ground conditions. Indoor shoes, outdoor shoes, working shoes, are four categories of shoes sports shoes, has been used in the present study, Concrete to target men in their 20s of 45people wearing the 260mm(Euro Code EU40), the experiments were carried out in the sand ground. Measurement of stress and pressure at the time of walking, Techstorm company Insole System the measured toe of the foot using, foot binding, was the metatarsal, the low pressure come from Fujoku four areas measured. Depending on the shoes and ground conditions findings, the results of this study represents the distribution of other stress and pressure, is expected to be useful in the development of a wearable shoe sand soil.

• Journal of Power System Engineering
• /
• v.6 no.3
• /
• pp.36-41
• /
• 2002

A swashplate type piston motor with a tripod joints is introduced to improve compactness and starting torque in conventional types of motor. If the driving torque of motor shaft is transmitted by utilizing the mechanism, its friction torque loss would be drastically reduced and mechanical efficiency would be improved because the lateral force on the piston of the rod type motor with tripod joints mechanism is relatively smaller than that of the conventional plunger type motor. In particular, kinematics analysis for the mechanism are done as a preliminary study to investigate the feasibility of the mechanism in the axial piston motor. General formulas are derived from the displacement and velocity analysis of the mechanism, showing relationships between output shaft and shoe holder motion. A series of numerical calculations are carried out for a medium size motor with 160cc/rev using the formulas and their graphical plots are shown as well.