DOI QR코드

DOI QR Code

A Characteristics of the Strength Recovery of the Soil Adjacent to the Pile Depending on the Construction Methods of a Environment-friendly Screw Concrete Pile for a Noise- and Vibration-free Method

무소음·무진동을 위한 환경친화적인 스크류콘크리트말뚝의 시공법에 따른 말뚝 인접 지반의 강도 회복 특성

  • Kim, Dong-Chul (Department of Civil. Engineering, Kyungsung University) ;
  • Choi, Youngkyu (Department of Civil. Engineering, Kyungsung University)
  • Received : 2012.09.04
  • Accepted : 2012.11.28
  • Published : 2013.01.31

Abstract

Before and after the test constructions, and after an 11-month hiatus from the pilot pile installations, the in-situ tests (CPT, SPT) were carried out at the ground adjacent to the noise- and vibration-free screw concrete piles installed by 2 kinds of construction methods (i.e., the toe-jetting shoe type, the pre-digging type). In the toe-jetting shoe type construction methods, after construction, the soil strength within 3.5D (where, D = pile diameter) from the pile center decreased greatly by about 46% of the original ground and, after an 11-month hiatus, a strength recovery adjacent to the piles appeared about 71% of the original ground. In the pre-digging type construction methods, a strength recovery adjacent to the piles appeared 100% of the strength of the original ground.

2가지 시공법(즉 선단분출형슈방식, 선행굴착방식)으로 시공한 무소음 무진동을 위한 스크류콘크리트말뚝의 인접지반에서 시공 전 후 및 11개월 경과 시 원위치시험(CPT, SPT)을 실시하였다. 선단분출형슈방식 시공법의 경우 시공 직후 말뚝 중심~3.5D(여기서 D : 말뚝직경)의 영역에 있는 지반의 강도는 원지반 강도의 46%정도로 크게 감소하였으며 시공 후 약 11개월 경과 시 말뚝 인접 지반의 강도회복은 원 지반 강도의 71%정도로 나타났다. 선행굴착방식 시공법의 경우 11개월 경과 시 말뚝 인접 지반의 강도는 원지반의 전단강도까지 회복되는 것으로 나타났다.

Keywords

References

  1. Bottiau, M. (2006), Recent Evaluations in Deep Foundation Technologies, Proceedings of 10th Int. Conf. on Piling and Deep Foundation, Amsterdam, 2006, pp.46-83.
  2. Choi, Y., Kim, D. C., Kim, S. S., and Nam, M. S. (2010), A Study on the Determination of Construction Method of a Noise & Vibration-Free Screw Concrete Pile, Journal of the Korean Geo-environmental Society, 2010, Vol.11, No.7, pp.15-24.
  3. Jo, C. H. (2010), "Piling Engineering Practice", ENG, p.36.
  4. Kim, D. C. (2011), A Study on the Construction Method and Behavior of Axial Resistances of a Noise and Vibration-Free Screw Concrete Pile Method, Graduate School of Civil and Environmental Engineering, Kyungsung University, Ph. D. dissertation, pp.56-82.
  5. Van Impe, W. F. (1988), "Considerations on auger pile design", Proc. of 1st Int. Conference on Deep Foundations on Bored and Auger Piles, Ghent, Balkma, pp.193-218.