• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1140-1147
• /
• 2022

With the development of digital technology, the marine environment is expected to change rapidly. In the case of autonomous vessels, technology is being developed in many countries, and the international community has begun to discuss ways to operate it. Changes in ships cause changes in the marine traffic environment and urge changes to aids to navigation. This study aims to analyze the cyber security management awareness of VTS personnel to improve the cyber security system for aids to navigation. To this end, the current status of cyber security management was reviewed with a focus on VTS, and a survey was conducted on VTS personnel. The survey analysis used the IPA methodology, and as a result of the analysis, a clear difference was observed in the perception of cybersecurity between those with experience in security and those without experience. In addition, technical measures related to cyber-attack detection and blocking should be implemented with the highest priority. The results of this study can be used as basic data for improving the cyber security management system for aids to navigation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.1
• /
• pp.67-75
• /
• 2023

In this study, the dynamic characteristics of an offshore platform being installed and physical phenomena are analyzed from the perspective of interaction between operation and maneuvering simulation using a real-time Maneuvering & Operation simulator of Shipbuilding & Marine Simulation Center at Tongmyong University. It was simulated to install the semi-submersible drilling rig moored by 8 mooring lines according to a scenario that is similar to it on the real sea, and 4 tug boats for position keeping of the rig and an offshore support vessel for hook-up of the mooring lines were operated. During the simulation, the motion, trajectory, tension of the objects were output in real time, and they were analyzed at each work procedure. This study about the simultaneous simulation of operation and maneuvering showed the detailed motion of the offshore platform and ships on the operation procedure and the interaction between operation and maneuvering in specific environment condition. Also, it confirmed that the simulation can be utilized to determine the possibility of offshore platform installation in specific situations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.950-957
• /
• 2023

For safe mooring and towing between the ship and port, the equipment must be designed in accordance with the relevant international regulations. However, some small shipyards and engineering companies often do not fully comprehend the core contents. Therefore, the international regulations regarding towing and mooring equipment are reviewed and the bollard and chock are newly developed based on the Mooring Equipment Guideline 4 (MEG4) standards. A bollard is a mooring equipment used to fix a mooring rope to the hull. It has two columns and is mostly used in a figure eight pattern knots under the mooring condition. The chock, which is used to change the mooring rope direction coming into the ship from outside, is manufactured using a casting with curvature. The two mooring equipment are widely used in the stern, bow, and mid-side. Owing to the increase in the size of container vessels and LNG ships, the mooring rope load has increased and the safe working load of the mooring equipment must be revised. This study summarizes and examines the results of the allowable stress method obtained using finite element analysis modelling. To consider the mesh size effect, a reasonable criteria was suggested by referring the existing class guidance. Additionally, the safe working load was verified through nonlinear collapse analysis, and the elastic region against load increments was confirmed. Furthermore, the proposed evaluation method can be used to develop similar equipment in the near future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.116-118
• /
• 2023

In recent years, the need for economical and sustainable ship routing has emerged due to the enforced regulations on environmental issues. Despite the development of weather forecasting technology, maritime accidents by rough waves have continued to occur due to incorrect weather forecasts. In this study, onboard measurements are conducted to observe the acutal situation on merchant ships in operation encountering rough waves. The types of measured data include information related to navigation (Ship's position, speed, bearing, rudder angle) and engine (engine revolutions, power, shaft thrust, fuel consumption), weather conditions (wind, waves), and ship motions (roll, pitch, and yaw). These ship experiments was conducted to 28,000 DWT bulk carrier, 63,000 DWT bulk carrier, 20,000 TEU container ship, and 12,000 TEU container ship. The actual ship experiment of each ship is intended to acquire various types of data and utilize them for multi-objective studies related to ship operation. Additionally, in order to confirm the sea conditions, the directional wave spectrum was reproduced using a wave simulation model. Through data collection from ship experiments and wave simulations, various studies could be proceeding such as the measurement for accurate wave information by marine radar and analysis for cargo collapse accidents. In addition, it is expected to be utilized in various themes from the perspective of safety and efficiency in ship operation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.681-687
• /
• 2023

The selection technique for optimal operation position selection technique is used to present the initial bow and stern draft with minimum resistance, for achievingthat is, the optimal fuel consumption efficiency at a given operating displacement and speed. The main purpose of this studypaper is to develop a program to select the optimal operating position with maximum energy efficiency under given operating conditions based on the effective power data of the target ship. This program was written as a Python-based GUI (Graphic User Interface) usingbased on artificial intelligence techniques sucho that ship owners could easily use the GUIit. In the process, tThe introduction of the target ship, the collection of effective power data through computational fluid dynamics (CFD), the learning method of the effective power model using deep learning, and the program for presenting the optimal operation position using the deep neural network (DNN) model were specifically explained. Ships are loaded and unloaded for each operation, which changes the cargo load and changes the displacement. The shipowners wants to know the optimal operating position with minimum resistance, that is, maximum energy efficiency, according to the given speed of each displacement. The developed GUI can be installed on the ship's tablet PC and application and used to determineselect the optimal operating position.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.239-251
• /
• 2024

In this study, a hydrogen fuel cell process based on methanol was developed to reduce greenhouse gas emissions. In Case1, the methanol fuel engine system was designed to investigate the emission of exhaust gas when methanol was supplied as fuel instead of gasoline to the engine. In Case2, a hydrogen fuel cell system was designed by adding a methanol reforming system to Case1. This hybrid system produced gray hydrogen and combined the output of the engine and fuel cell to drive the ship. However, gray hydrogen emits carbon in the process of producing hydrogen. To address this problem, a carbon capture and utilization (CCU) system was added to Case3. The CO2 of the flue gas discharged from Case2 was synthesized with gray hydrogen to produce blue methanol. The results of the case studies revealed that the optimal operating conditions were 220 ℃, 500 kPa, SCR = 1.0, and flow ratio = 0.7. The system of Case3 reduced carbon emissions by 42% compared with that Case1. Thus, the hybrid system of Case3 could considerably reduce the ship's CO2 emissions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.165-175
• /
• 2024

Hydrogen is being touted as one of the energy sources to combat the climate change crisis. However, hydrogen can leak into enclosed spaces, rise to the ceiling, accumulate, and cause fires and explosions if it encounters an ignition source. In particular, ships that transport hydrogen or use it as a fuel comprise multiple enclosed spaces. Therefore, the dif usion characteristics within these spaces must be understood to ensure the safe use of hydrogen. The purpose of this study is to experimentally determine the diffusion characteristics of helium, which has similar properties to hydrogen, in a closed space on board a ship, and to determine the change in the oxygen concentration along the leakage direction as the air change per hour(ACH) increases to 25, 30, 35, 40, and 45 through CFD simulation. The study, results revealed that the oxygen concentration reduction rate was 2% for leakage in the -z direction and 1% for leakage in the +x and +z directions, and the ventilation time was 15 min 30 s for leakage in the -z direction, 7 min for leakage in the +x direction, and 9 min for leakage in the +z direction, showing that differences existed in the oxygen concentration and ventilation time depending on the leakage direction. In addition, no significant difference was observed in the rate of oxygen concentration reduction and ventilation time in all leakage directions from the ACH of 35 and above in the experimental space. Therefore, because the oxygen concentration and ventilation time were not improved by increasing the ACH, 35 was noted as the optimal ACH in this experimental environment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.172-178
• /
• 2021

In the ship repair market, interest in maintenance and repair is steadily increasing due to the reinforcement of prevention of environmental pollution caused by ships and the reinforcement of safety standards for ship structures. By reflecting this effect, the number of requests for repairs by foreign shipping companies increases to repair shipbuilders in the Southwest Sea. However, because most of the repair shipbuilders in the southwestern area are small and medium-sized companies, it is difficult to lead to the integrated synergy effect of the repair shipbuilding companies. Moreover, the infrastructure is not integrated; hence, using the infrastructure jointly is a challenge, which acts as an obstacle to the activation of the repair shipbuilding industry. Floating docks are indispensable to operating the repair shipbuilding business; in addition, most of them are operated through renovation/repair after importing aging caisson docks from overseas. However, their service life is more than 30 years; additionally, there is no structure inspection standard. Therefore, it is vulnerable to the safety field. In this study, the finite element analysis program of ANSYS was used to evaluate the structural safety of the modified caisson dock and obtain additional structural reinforcement schemes to solve the derived problems. For the floating docks, there are classification regulations; however, concerning structural strength, the regulations are insufficient, and the applicability is inferior. These insufficient evaluation areas were supplemented through a detailed structural FE-analysis. The reinforcement plan was decided by reinforcing the pontoon deck and reinforcement of the side tank, considering the characteristics of the repair shipyard condition. The final plan was selected to reinforce the side wing tank through the structural analysis of the decision; in addition, the actual structure was fabricated to reflect the reinforcement plan. Our results can be used as reference data for improving the structural strength of similar facilities; we believe that the optimal solution can be found quickly if this method is used during renovation/repair.

• Korean Security Journal
• /
• no.44
• /
• pp.85-116
• /
• 2015

Found in 23 Dec 1953 to cope with illegal fishing of foreign ships and coastal guard duty, Korea Coast Guard was re-organized as an office under Ministry of Public Safety since the outbreak of sinking of passenger ship "Sewolho". In the course of re-organization, intelligence and investigation duty were transferred to Police Department except "Cases happened on the sea". But the definition of intelligence duty is vague and there are lots of disputes over the jurisdiction and range of activities. With this situation in consideration, the object of this study is to analyse legal and institutional characteristic of KCG Intelligence, to compare them to that of Police Department, foreign agencies like Japan Coast Guard and US Coast Guard, to expose the limit and to suggest solution. To summarize the conclusion, firstly, in the legal side, there is no legal basis on intelligence in [The Government Organization Act], no regulation for mission, weak basis in application act. Secondly, in the institutional side, stated in the minor chapter of [The Government Organization Act], 'the cases happened on sea' is a quite vague definition, while guard, safety, maritime pollution duty falls under 'on the sea' category, intelligence fell to 'Cases happened on the sea' causing coast guard duty and intelligence have different range. In addition, reduced organization and it's manpower led to ineffective intelligence activities. In the case of Police Department, there is definite lines on 'administration concerning public security' in [The Government Organization Act], specified the range of intelligence activities as 'collect, make and distribute information concerning public security' which made the range of main duty and intelligence identical. Japanese and US coast guards also have intelligence branch and performing activities appropriate for the main missions of the organizations. To have superiority in the regional sea, neighboring countries Japan and China are strengthening on maritime power, China has launched new coast guard bureau, Japan has given the coast guard officers to have police authority in the regional islands, and to support the objectives, specialized intelligence is organized and under development. To secure maritime sovereignty and enhance mission capability in maritime safety duty, it is strongly recommended that the KCG intelligence should have concrete legal basis, strengthen the organization and mission, reinforce manpower, and ensure specialized training administrative system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.1
• /
• pp.21-28
• /
• 2006

Since the usage of tributyltin(TBT) has been banned, many chemicals including Sea-Nine 211, Cu-pyrithione, and Zn-pyrithione were developed to use as antifouling agents for ships and coastal structures. However, the toxicity of these antifouling chemicals have not been systematically evaluated in ecotoxicological and biological studies. In this study, we investigated the effect of four antifouling substances on survival of estuarine rockfish, Sebastes schlegeli and amphipod, Monocorophium acherusicum. Survival of S. schlegeli and M. acherusicum during the 96-h exposure period were used to estimate the median lethal concentrations(LC50s) of test chemicals for each test species. Among antifouling agents, Cu-pyrithione($56{\mu}g{\cdot}1^{-1}$;96-h LC50) was most toxic to S. schlegeli, followed by $TBT(73{\mu}g{\cdot}1^{-1}),\;Sea-Nine(184{\mu}g{\cdot}1^{-1})\;and\;Zn-pyrithione(l707{\mu}g{\cdot}1^{-1})$, while TBT($26{\mu}g{\cdot}1^{-1}$) was most toxic to M. acherusicum followed by Sea-Nine($49{\mu}g{\cdot}1^{-1}$), Cu-pyrithione($119{\mu}g{\cdot}1^{-1}$) and Zn-pyrithione($334{\mu}g{\cdot}1^{-1}$). Effect concentrations of the antifouling chemicals estimated in this study can be used when assessing the potential risks of these substances, of which usage is increasing in the coastal environment.