• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 추계학술대회
• /
• pp.70-71
• /
• 2023

본 연구는 항만 내 LNG 벙커링 동시작업 안전성 평가의 일환이다. 본 연구의 목적은 CFD를 활용하여 제한수역에서 항행선박이 계류된 선박에 미치는 영향을 평가하는 것이다. 수치해석은 Star-CCM+를 활용하였으며, 수치 모델 검증을 위해 해석 결과는 공개된 실험 데이터와 비교하였다. 연구 결과로부터 항행선박과 계류선박 간의 상호작용을 평가하는 중요한 정보를 얻을 수 있었으며, 이는 LNG 벙커링의 안전성을 평가하는 데 활용될 수 있다. 향후 연구에는 다양한 시나리오에 대한 평가 및 STS(Ship-to-ship) LNG 벙커링 동시작업 안전성을 평가하기 위한 연구가 계획되어 있다.

• 한국해양공학회지
• /
• 제19권6호통권67호
• /
• pp.64-71
• /
• 2005

The welding methods have been applied to the most structural products used in the automobile, ship construction, and construction. The structure steel must have sufficient strength of structure; However, the mechanical properties of the welded part changes when it is welded. Therefore, the stability or life of the structure may be affected by the changed mechanical properties. The mechanical properties of the welded part must be examined in order to ensure the safety of structure. In this research, the SS400 steel and the STS304 steel were used to estimate the mechanical properties of the HAZ by weld thermal cycle simulation. In this study, the materials were used to examine the weld thermal cycle simulation characteristic, under two conditions: the drawing with diameter of $\Phi$10 and the residual stress removal treatment. To examine the mechanical properties by the weld thermal cycle simulation, the tensile test was carried out in room temperature. The crosshead speed was lmm/min.

• 한국항만경제학회지
• /
• 제36권4호
• /
• pp.1-16
• /
• 2020

우리나라는 항만 인프라가 뛰어나며, 석유화학단지를 보유하고 있기 때문에 동북아 오일 허브의 가능성이 충분하다. 특히 부가가치가 높은 STS(해상환적작업)는 국가 경제에 크게 기여하고 있다. 본 연구에서는 화학공업생산품, 석유정제품, 그리고 원유를 전국, 부산, 울산, 그리고 여수/광양 물동량으로 분류하였다. 그리고 이들 간의 수입, 수출 및 환적의 그랜저 인과관계를 살펴보았다. 단위근 검정을 위하여 ADF, PP, KPSS를 적용하였다. 또한 VAR모형과 Toda and Yamamoto의 확장된 VAR모형을 활용하여 분석을 실시하였다. 그 결과 각 지역에 따라 그랜저 인과관계 유무에 차이가 있는 것을 발견하였다. 또한 컨테이너와 비컨테이너로 구분해서 분석한 결과 화물 종류에 따른 차이가 나타났다. 따라서 항만에 대한 정부의 정책이나 인센티브제도와 같은 지원은 획일화 보다는 지역, 화물의 종류, 화물의 운송 형태 등에 따라 차별화가 요구된다.

• 선박안전
• /
• 통권21호
• /
• pp.66-77
• /
• 2006

Stainless steel has been stably used closed by passivity oxidation films(Cr₂O₃) is made by neutral atmospheric environment. However, passivity oxidaton films of the surface of stainless steel occasionally comes to be destroyed in seawater which is influenced by an environment having galogen ion like Cl‾, then, localization corrosion comes to occur Stainless steel 304 for shaft system material of the small-size FRP fishing boat on seawater environments made an experiment on simulation of sacrifical anode(Al, Zn). Through these experiment and study, following results have been obtained ; According to the field inspection and corrosion simulation, the corrosion on the 2nd class stainless steel shaft(STS304) in FRP fishing boat has been verified to occur by crevice corrosion and galvanic corrosion etc., According to the comparison and analysis of Stainless steel 304 was severely corroded, but, protected shaft specimen was not totallay corroded. This result is assumed to be made by the facts that anodic reaction, Fe → fe²+＋ 2e¯, has been restricted by the cathodic protection current of sacrificial anode material.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.196-197
• /
• 2011

Rudder, one of the most important component in the marine vessel, is now being decreased life time to serve due to cavitation erosion, vortex current, high flow speed suffer from ship speed going up dramatically. In this study, 10 kinds of thermal spray coating materials(2 of Zn alloy series, 3 of Al alloy series, 3 of Cu alloy series, 2 of STS alloy series) are chosen to apply on specimens and analyze micro structure, metallic composition, properties(porosity, oxidation) by using visual observation, XRD, EDX etc.. Additionally, to refine the characteristic of corrosion endurance for thermal spray coating layer, compared with thermal spray process and 5 kinds of heavy duty painting and AC paint (Anti-Corrosion Paint). Based on above mentioned experimental results, a priority of all coated specimens on corrosion-erosion endurances finalized and summarized there by desirable composition and process of thermal sprayed material properly.

• 한국해양공학회지
• /
• 제21권5호
• /
• pp.33-38
• /
• 2007

The welding methods have been applied in the most structural products from multi-field of automobile, ship construction and construction, and so on. The structure steel must have enough strength of structure. In this study, SS400 steel and STS304 steel were used to estimate the corrosion characteristics of the weld thermal cycle simulated HAZ. To evaluate the corrosion characteristics, also, the materials with two conditions were used in 3.5% NaCl. The one is to the drawing with diameter of ${\Phi}10$ and the other is to the residual stress removal treatment. The electrochemical polarization test and immersion test were carried out. From test results, corrosion potential, corrosion current density, weight loss ratio and corrosion rate were measured. In the kinds of SS400 steels, corrosion potential of weld thermal cycle simulated specimens after the heat treatment showed somewhat the direction of noble potential. And in the base metal to be drawing weight loss ratio and corrosion rate occurred higher than the other kinds. In the kinds of STS304 steels, the result of base metal to be drawing was similar to results of SS400 steels, too. Two kinds of $750^{\circ}C$ and $1300^{\circ}C$ of weld thermal cycle simulation after the heat treatment were rather higher than the other kinds in weight loss ratio and corrosion rate.

• 한국항해항만학회지
• /
• 제45권3호
• /
• pp.87-94
• /
• 2021

국제해사기구의 연료유 황 함유량 제한 등, 세계적으로 강화되고 있는 환경규제로 LNG를 선박 연료로 사용하는 연구 및 사업이 활발히 진행되고 있다. 본 연구에서는 기본설계 되어 있는 부유식 벙커링 터미널(FLBT, Floating LNG bunkering terminal)을 대상으로, STS LNG 하역 작업을 위해 접안 하는 과정을 수치 시뮬레이션으로 평가하였다. 수치해석에서는 예인선이 대상선박을 밀 경우 이를 가상의 펜더로 가정하였으며, 당길 때는 HMPE 로프 특성을 적용하였다. 해석에는 파랑, 조류, 바람 1년 재현 확률의 해상조건을 적용하였다. 수치모델은 선행 모형시험 결과로부터 조정되어 정확한 결과를 얻을 수 있도록 하였다. 해석 결과 LNG선은 대부분의 1년 환경조건에서 안전한 접안이 가능하였다. 파랑 방향에 따라 안정성의 차이가 큼으로 FLBT의 Heading control 기능을 적용하여 횡파를 피한다면 더욱 안정적인 운용이 가능할 것이다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권5호
• /
• pp.484-492
• /
• 2013

세계 각국은 산업 고도화에 따라 해수환경에 내식성, 내마모성을 갖는 재료에 대한 수요가 지속적으로 증가하고 있다. 특히 표면이 미려하고 내식성이 강한 스테인리스강은 선박, 해양 플랜트 및 조류발전 등 다양한 산업분야에 널리 사용되고 있다. 그러나 해양환경에서 $Cl^-$ 이온에 의한 부식 손상과 고속회전에 따라 캐비테이션 손상이 발생하기 쉽다. 따라서 이 연구에서는 해수 내 빠른 유속 환경에 사용되는 304 스테인리스강에 대해 캐비테이션 침식-부식실험을 실시하여 외부 조건이 스테인리스강의 내식성에 미치는 영향을 종합 분석하였다. 캐비테이션이 발생된 조건에서 워터캐비테이션 피닝효과에 의한 시험편 내에 압축잔류응력 형성으로 높은 경도를 나타냈으나, 물리적 충격으로 인한 산화피막 파괴로 동전위 분극 실험에서는 높은 전류밀도를 나타냈다. 따라서 해수 내 캐비테이션에 대한 저항성을 향상시키기 위해서는 전기화학적 특성뿐만 아니라 기계적 특성도 복합적으로 고려한 재료의 선택이 필요하다.

• 해양환경안전학회지
• /
• 제20권3호
• /
• pp.304-311
• /
• 2014

In this study, to apply hydrogen energy to ship engine and to generate effective hydrogen production, we investigated the effects of high temperature $H_2SO_4$ feed rate and cooling water rate to pump parts with fixed frequency needed to reciprocate motion and a simulation was conducted at each condition. In the fixed frequency and cooling water inlet flow rate of 0.5 Hz and 3.9 kg/s, we changed the high temperature $H_2SO_4$ flow rate to 47.46 kg/s (it is 105 % of 45.2 kg/s), 49.72 kg/s (110 %), and 51.98 kg/s (115 %). Also, at 0.5 Hz and 45.2 kg/s of frequency and high temperature $H_2SO_4$ flow, the thermal hydraulic analysis was performed at the condition of 95 % (3.705 kg/s), 90 % (3.51 kg/s), and 85 % (3.315 kg/s). In overall simulation cases, the physical properties of materials are more influential to the temperature increase in the pump part rather than the changes on the feed rate of high temperature $H_2SO_4$ and cooling water. A continuous operation of pump was also capable even if the excess feed of high temperature $H_2SO_4$ of about 15 % or the less feed of cooling water of about 15 % were performed, respectively. When the increasing feed of high temperature $H_2SO_4$ of up to 5 %, 10 %, and 15 % were compared with base flow (45.2 kg/s), the deviation of time period rose to a certain temperature and ranged from 0 to 4.5 s in the same position (same material). In case of cooling water, the deviation of time period rose to a certain temperature and ranged from 0 to 5.9 s according to the decreasing feed changes of cooling water at 5 %, 10 %, and 15 % compared to a base flow (3.9 kg/s). Finally, the additional researches related to the two different materials (Teflon and STS for Pitch and End-plate), which are concerned about the effects of temperature changes to the parts contacting different materials, are needed, and we have a plan to conduct a follow-up study.

• Design & Manufacturing
• /
• 제14권2호
• /
• pp.62-68
• /
• 2020

Recently, research on precise parts required in aerospace, ship, and automobile industries has been actively conducted. In this paper, electron beam drilling machining parameters were selected and experiments were conducted to compare processing characteristics analysis according to machining parameters through machining experiments of a vaporization amplification sheet to which STS 304 was applied. Also, as a result of measuring the machining. As the thickness gradually increased, it was confirmed that the electron beam could not reach the vaporization amplification sheet and thus melted on the surface of the material. As a result of the experimental analysis, it was analyzed that the vaporization explosion reaction of the vaporization amplification sheet was not normally performed due to the working distance (WD) according to the material thickness.