• 한국항해항만학회지
• /
• 제27권2호
• /
• pp.193-198
• /
• 2003

일점계류된 선박의 외력에 의한 불안정 거동을 경감시키는 방법에 대하여 검토하였다. 계류된 선박의 수치계산 시뮬레이션을 위해 조종운동방정식을 사용하였고, 선박에 가해지는 외력으로는 풍력과 파강제력이 고려되었다. 파강제력은 3차원특이점분포법에서 얻어진 주파수전달함수로부터 시간영역해석법을 적용하였고, 풍력은 OCIMF(1994)에서 제시한 값을 사용하였다. 계류된 선박의 안전대책으로 바우스러스터를 이용한 제어방법, 두 번째 묘를 이용한 굴레(Birdle)를 씌우는 묘박법이 검토되었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.75-85
• /
• 2021

The broadband noise can be dominant or important for total characteristics for marine propeller noise representing the minimum base of self-noise. Accurate prediction of such noise is crucial for survivability of underwater military vessels. While the FW-H Formulation 1B can be used to predict broadband trailing edge noise, the method required experiment measurements of surface pressure correlations, showing its limitations in generality. Therefore, in this study, the methods are developed to utilize wall pressure spectrum models to overcome those limitations. Chase model is adopted to represent surface pressure along with the developed formulations to reproduce pressure statistics. Newly developed method is validated with the experiments of airfoils at different velocities. Thereafter, with its feasibility and generality, the procedure incorporating computational fluid dynamics is established and performed for a propeller behind submarine hull. The results are compared with the experiments conducted at Large Cavitation Tunnel, thus showing its usability and robustness.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.552-567
• /
• 2017

The floating crane vessel in waves gives rise to the motion of the lifted object which is connected to the hoisting wire. The dynamic tension induced by the lifted object also affects the motion responses of the floating crane vessel in return. In this study, coupled motion responses of a floating crane vessel and a lifted subsea manifold during deep-water installation operations were investigated by both experiments and numerical calculations. A series of model tests for the deep-water lifting operation were performed at Ocean Engineering Basin of KRISO. For the model test, the vessel with a crane control system and a typical subsea manifold were examined. To validate the experimental results, a frequency-domain motion analysis method is applied. The coupled motion equations of the crane vessel and the lifted object are solved in the frequency domain with an additional linear stiffness matrix due to the hoisting wire. The hydrodynamic coefficients of the lifted object, which is a significant factor to affect the coupled dynamics, are estimated based on the perforation value of the structure and the CFD results. The discussions were made on three main points. First, the motion characteristics of the lifted object as well as the crane vessel were studied by comparing the calculation results. Second, the dynamic tension of the hoisting wire were evaluated under the various wave conditions. Final discussion was made on the effect of passive heave compensator on the motion and tension responses.

• 한국소음진동공학회논문집
• /
• 제17권7호
• /
• pp.572-578
• /
• 2007

Two stroke low speed diesel engines are widely used for marine propulsion or as power plant prime mover. These engines have many merits which includes higher thermal efficiency, mobility and durability. Yet various annoying vibrations occur sometimes in ships or at the plant itself. Of these vibrations, torsional vibration is very important and dictates a careful investigation during the engme's initial design stage for safe operation. With the rule and limit on torsional vibration in place, shaft strength fatigue due to torsional vibration however demands further analysis which possibly can be incorporated in the classification societies' rule and limit. In addition, the shaft's torsional vibration stresses can be calculated equivalently from accumulated fatigue cycles number due to transient torsional vibration in time domain. In this paper, authors suggest a new estimation method combined with Palmgren-Miner equation. A 6S70MC-C ($25,320ps{\times}91rpm$) engine for ship propulsion was selected as a case study. Angular velocity was measured, instead of shaft's strain, for simplified measurement and it was converted to torsional vibration stress for accumulated fatigue cycle numbers in shafting life time. Likewise, the accumulated fatigue calculation was compared with shaft fatigue strength limit. This new method can be further realized and confirmed in ship with two stroke low speed diesel engine.

• 대한조선학회논문집
• /
• 제52권1호
• /
• pp.25-33
• /
• 2015

Following the previous works on the natural frequency of heaving circular cylinder, i.e. Lee and Lee (2013) and Kim and Lee (2013), an investigation of the same spirit on the 2-dimensional cylinder of Lewis form has been conducted. As before, the natural frequency is defined as that corresponding to the local maximum of the MCFR (Modulus of Complex Frequency Response), which is given by the equation of motion in the frequency domain analysis. Hydrodynamic coefficients were found by using the Ursell-Tasai method, and numerical results for them were obtained up to much higher frequencies than before, for which the method was known as numerically unstable in the past. For a wide range of H, the beam-draft ratio, and ${\sigma}$, the sectional area coefficient, including their practical ranges for a ship, results for the natural frequency were computed and presented in this work. Two approximate values for the natural frequency, one proposed by Lee (2008) and another one by the damped harmonic oscillator, were also compared with the current results, and for most cases it was observed that the current result is between the two values. Our numerical results showed that the values of the local maximum of MCFR as well as the natural frequencye increase as ${\sigma}$ increases while H decreases. At present, extension of the present finding to the 3-dimensional ship via the approximate theory like the strip method looks promising.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.312-326
• /
• 2012

This paper considers a fully coupled 3D BEM-FEM analysis for the ship structural hydroelasticity problem in waves. Fluid flows and structural responses are analyzed by using a 3D Rankine panel method and a 3D finite element method, respectively. The two methods are fully coupled in the time domain using a fixed-point iteration scheme, and a relaxation scheme is applied for improve convergence. In order to validate the developed method, numerical tests are carried out for a barge model. The computed natural frequency, motion responses, and time histories of stress are compared with the results of the beam-based hydroelasticity program, WISH-FLEX, which was thoroughly validated in previous studies. This study extends to a real-ship application, particularly the springing analysis for a 6500 TEU containership. Based on this study, it is found that the present method provides reliable solutions to the ship hydroelasticity problems.

• 대한공간정보학회지
• /
• 제17권1호
• /
• pp.131-139
• /
• 2009

기존의 육상레이더망을 이용한 선박모니터링 시스템(vessel monitoring system)의 경우는 선박을 탐지할 수 있는 범위가 제한적이기 때문에 지속적인 관리와 감시에 어려움이 있다. 본 논문에서는 이런 문제점을 극복하고, 광역의 지역에 대한 효율적인 영상정보의 수집과 기상조건에 상관없는 자료의 취득이 가능한 SAR 위성영상을 활용하여 해양모니터링을 위한 선박감시시스템의 핵심 부분이 될 수 있는 선박탐지에 관한 연구를 수행하고자 한다. 선박 탐지에 관한 연구는 크게 선박 대상체 자체를 탐지하는 알고리즘과 항행선박에 의해 발생되는 선형 항적(航跡)을 탐지하는 알고리즘으로 나눌 수 있는데, 본 연구에서는 선박 대상체 자체를 탐지하는 방법을 제안하고, 선박대상체의 위치와 항로를 파악하여 그 정확도를 일부 현장자료를 통해 검증하고자 한다. 1차 다항식 변환을 통해 입력영상을 기하보정하고 잡음제거를 위해 Wiener 필터를 사용한다. Otsu(1979)가 제안한 분산최대 2분할법을 통해 입력영상을 이진화시키고 레이블링 기법을 사용하여 영상화소들의 그룹을 재구성한다. 형태학적 필터링과 화소간 거리 클러스터링을 이용하여 선박후보대상체들을 빠르게 추출하고 중심좌표와 침로를 계산한다.

• 대한조선학회논문집
• /
• 제29권2호
• /
• pp.38-47
• /
• 1992

본 연구에서는 항만내 파도응답과 항만안에 계류된 선박의 운동응답을 선형포텐셜이론으로 해석하고 모형시험을 수행하여 항만공진문제의 물리적 특성과 항만내 계류된 선박의 운동특성을 밝혔다. 유체영역을 해양과 항만영역으로 나누어 각 영역에서 경계치문제를 독립적으로 푼 다음, 두 영역의 해를 항만입구에서 정합하여 미지수를 구함으로써 선박에 입사하는 항만내 파도응답을 유도하였다. 선박에 작용하는 파기진력을 계산하고 선체운동에 따르는 동유체력을 해석하였다 얻어진 유체력을 이용하여 운동방정식을 풀어 선박의 운동변위를 구하였다. 사각형 항만안에 계류된 선박의 운동응답에 대한 실험을 수행한 결과 계산치와 실험치는 정성적으로 서로 비슷한 경향을 보이나 정량적으로 차이를 보이고 있음을 확인하였다. 여기서는 우선 선체운동중 대칭운동(전후동요-수직동요-종동요)만을 취급하였다. 비대칭운동(좌우동요-횡동요-선수동요)과 실험결과는 다음 기회에 발표할 예정이다.

• 한국지능시스템학회논문지
• /
• 제21권3호
• /
• pp.290-295
• /
• 2011

최근접점과 최근접시간에 기초를 둔 종래 선박충돌회피 알고리즘은 국제해상충돌예방규칙(COLREG, International Regulations for Preventing Collisions at Sea, 1972)에 의한 선박간의 항법규정을 고려하지 않는다는 문제점이 있다. 본 논문에서 제안하는 알고리즘은 조우선박의 상대방위를 측정함으로써 자선이 피항선인가 유지선이 될 것인가를 판단한다. 피항시점을 결정하기 위하여 타원형의 선박안전영역 모델을 이용하여 타선과 위험한 위치에 도달하는 지점과 시간을 계산함으로써 피항을 수행한다. 두 선박의 위치, 속도 및 방위를 임의로 생성하여 타원모델에 의한 충돌회피 과정을 시뮬레이션 한다. 또한 실제적인 해양사고 발생 자료를 이용하여 충돌위험 분석 및 선박간 충돌회피를 위한 방안을 제시한다. 제안한 알고리즘은 안개 및 기상악화의 경우 시계가 제한되거나 야간항해 중 항해등의 식별이 어려워 피항선과 유지선의 판단이 불확실한 경우에도 국제해상충돌예방규칙에 의한 충돌회피 동작에 효과적으로 적용할 수 있다.

• 대한조선학회논문집
• /
• 제60권2호
• /
• pp.135-145
• /
• 2023

Developing high-fidelity Computational Fluid Dynamics (CFD) simulation methods used to evaluate the airwake characteristics along a flight deck of a large ship, the various kind of data such as actual ship measurement and wind tunnel results are required to verify the accuracy of CFD simulation. Inflow velocity profile at the bow, local unsteady flow field data around the flight deck, and highly reliable wind tunnel data which were measured after reviewing Atmospheric Boundary Layer (ABL) simulation and Reynolds Number effects were also used to determine the key parameters such as turbulence model, time resolution and accuracy, grid resolution and type, inflow condition, domain size, simulation length, and so on in STAR CCM⁺. Velocity ratio and turbulent intensity difference between Full-scale CFD and actual ship measurement at the measurement points show less than 2% and 1.7% respectively. And differences in velocity ratio and turbulence intensity between wind tunnel test and small-scale CFD are both less than 2.2%. Based upon this fact, the selected parameters in CFD simulation are highly reliable for a specific wind condition.