• Journal of Navigation and Port Research
• /
• v.29 no.4
• /
• pp.319-325
• /
• 2005

Planning for the construction of ports and harbors usually takes place without the consideration of tsunamis because of their rare occurrence, approximately once every 100 years. However, recent warnings indicate that massive earthquakes could occur in Japan within the next 30 years. Earthquakes may generate large-scale tsunamis. Therefore, any tsunamis in the vicinity of Japan would also be expected to affect eastern Korea. Therefore, with the looming concerns of tsunamis and earthquakes, immediate attention must be given to the planning of ports and harbors. The warnings deserve an immediate response. The threatened regions cover a very large territory, and the degree of severity of the tsunamis is forecasted to be varied. Therefore, any modeling of the potential scenarios will require a broad array of possibilities. The objective of this paper is to consider the potential damage from tsunamis to ports and moored ships in Japan and Korea. In addition, consideration will be given to how the construction plans of ports and harbors should be changed to cope with the threats from earthquakes and tsunamis.

• Journal of Welding and Joining
• /
• v.26 no.5
• /
• pp.66-73
• /
• 2008

Welding work in pre-erection or erection stage of shipbuilding construction to be carried out in flat and vertical upward position mostly and Electrogas welding(EGW) is actively applied especially for vertical butt joint of thicker steel plate recently. In this study considered how to develope and improve mechanical properties of weld metal and HAZ in high heat input welding processes such as EGW and Electroslag welding(ESW) with its welding equipment in order to extend the application range to the longitudinal members and hatch coaming parts of container ship. Some components of welding system and parameters were modified to get the faster travel speed and reduce weld heat input, and also by adding additional filler rods or tubes increase the amount of deposited weld metal. With the test get some good date can apply to actual fabrication work and recommend items to manufacture welding materials make better. Above all things it's a fruition that to prepare the possibility of application of ESW to shipbuilding construction which fill up the gap of stoppage days of more than 20 years.

• Structural Engineering and Mechanics
• /
• v.71 no.3
• /
• pp.283-290
• /
• 2019

In global competition manufacturing companies have to produce modern, new constructions from advanced materials in order to increase competitiveness. The aim of my research was to develop a new composite cellular plate structure, which can be primarily used for structural elements of road, rail, water and air transport vehicles (e.g. vehicle bodies, ship floors). The new structure is novel and innovative, because all materials of the components of the newly developed structure are composites (laminated Carbon Fiber Reinforced Plastic (CFRP) deck plates with pultruded Glass Fiber Reinforced Plastic (GFRP) stiffeners), furthermore combines the characteristics of sandwich and cellular plate structures. The material of the structure is much more advantageous than traditional steel materials, due mainly to its low density, resulting in weight savings, causing lower fuel consumption and less environmental damage. In the study the optimal construction of a given geometry of a structural element of a road truck trailer body was defined by single- and multi-objective optimization (minimal cost and weight). During the single-objective optimization the Flexible Tolerance Optimization method, while during the multi-objective optimization the Particle Swarm Optimization method were used. Seven design constraints were considered: maximum deflection of the structure, buckling of the composite plates, buckling of the stiffeners, stress in the composite plates, stress in the stiffeners, eigenfrequency of the structure, size constraint for design variables. It was confirmed that the developed structure can be used principally as structural elements of transport vehicles and unit load devices (containers) and can be applied also in building construction.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.1 s.151
• /
• pp.48-54
• /
• 2007

Higher productivity and less cost during the manufacturing process of ships are required to maintain international competitiveness of modern shipbuilding industries. The integrated hull/ outfitting/ painting scheduling(IHOP) process is a final point, where logistics are finally being integrated and upcoming schedules are made. Therefore, more profits are expected from IHOP by effective management. In this thesis, IHOP is proposed in order to solve how to choose block erection date with IHOP scheduling logic. The result of IHOP scheduling is highly advised to utilize fabrication, outfitting shops. A standardized operation and load of resource will eventually be applied in long-term time span point of view for this will make it easy to enable capacity planning and workforce planning. It is also expected to eliminate inefficiency in overtime work and efficiently utilize manpower in short-term.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1164-1169
• /
• 2008

The miniaturization of the Air Handling Unit (AHU) has become an actual need because of the restriction of the using space on the vessel. In modern AHU’s construction, in which the fan section is at the end part of the ship, it’s very difficult to select a suitable capacity of evaporators, because the fan motor emits heat. Thus, the AHU structure has been changed as the fan section has been set before the cooling coil to get temperature values similar to the designed amount. Also, the air guider is installed in order to maintain equal air distribution after it passed the fan section. So, it is possible for air to equally pass the cooling coil. It is investigated three different geometries to find the best performance. Also, It is compared with the numerical and experimental results. The study found the case 3 gives the best results. The results of this study show the possible application of the new design.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.3
• /
• pp.1-5
• /
• 2009

It is necessary to develop an efficient optimization technique to optimize engineering structures that have given design spaces, discrete design values, and several design goals. In this study, an optimum algorithm based on the genetic algorithm was applied to the multi-object problem to obtain an optimum solution that simultaneously minimizes the structural weight and construction cost of panel blocks in ship structures. The cost model was used in this study, which includes the cost of adjusting the weld-induced deformation and applying the deformation control methods, in addition to the cost of the material and the welding cost usually included in the normal cost model. By using the proposed cost model, more realistic optimum design results can be expected.

• Transactions of Materials Processing
• /
• v.22 no.1
• /
• pp.5-10
• /
• 2013

Steel plates are widely used in many manufacturing areas such as ship and bridge construction industries and are fabricated by different forming processes. Steel plates can have various shape defects, such as curl or camber. Roller leveling reduces the magnitude of the residual stress by using small amounts of reverse bending via an appropriate arrangement of the rolls and the associated plastic deformation in the steel plate. In this study a model for the residual stress after roller leveling is developed. In order to simplify the formulation, a plane-strain condition is assumed and the stress in the thickness direction is assumed to be negligible. The camber deformation in a real sized plate are measured and compared with the prediction values from the model to validate the accuracy of the model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.739-746
• /
• 2006

Anthropogenic underwater sound such as ship radiated noise, pile driving noise. underwater explosive blast and so on, affects marine animals. This study describes the effects of underwater noise on fishes. The characteristics of noise, fish hearing and response, and sound propagation loss are analysed based on existing results and measured data in marine construction site. Finally, the safety zone range of fish on man made underwater noise is derived.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.6 no.1
• /
• pp.35-45
• /
• 2000

The slipway, which is one of stern construction, is necessary for stern trawler to let fishing implements, such as fishing net, otter board and warp, go out effectively. It may be doubtable whether there is any possibility for deckwetness to occur because the slipway is obliquely in contact with sea surface. The author discusses any possibility for deckwetness through slipway of stern trawler in wind and waves. A 350 G/T class, ocean-going stern trawler is adopted for the present study. The stem trawler is particularly assumed to drift with fishing implements hung down the slipway due to internal or external accident during fishing operation in real sea. The author considers two factors as possibility for deckwetness to occur through slipway. One is mooring effect of fishing implements hung down the slipway under wind pressure, and the other is relative ship motion in vertical direction in waves. Through the numerical calculation, the author clarifies that there is thin possibility for deckwetness to occur from above two points of view.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.05a
• /
• pp.153-158
• /
• 2003

Design of general steel structure had applied and achieve elastic design concept mainly so far. Because elastic design supposes that whole structure complies with elasticity formula as that achieve via allowable stress of material is concept that calculate stress distribution of construction about action external load and estimate load of when the maximum stress reaches equally with allowable stress that is established beforehand by maximum safety load of the structure. But, absence that compose actuality structure by deal with external load increase small success surrender and structure hardness falls and tell structure in limit state finally on the whole as showing complicated conduct by interference between these breakdown at buckling by compression. Examined closely about conduct of place since initial buckling through carbon vocal cords transformation finite element analysis series (ANSYS) that place mending condition supposes case that is boundary condition in this investigation.