• 한국산업융합학회 논문집
• /
• 제27권1호
• /
• pp.161-172
• /
• 2024

Approximately 89% of all capsizing accidents involve small vessels, and despite their relatively high accident rates, small vessels are not subject to ship stability regulations. Small vessels, where the provision of essential basic design documents for stability calculations is omitted, face challenges in directly calculating their stability. In this study, considering that the majority of domestic coastal small vessels are of the Chine-type design, the goal is to establish the major hull form characteristic data of vessels, which can be identified from design documents such as the general arrangement drawing, as input data. Through the application of a deep learning approach, specifically a multilayer neural network structure, we aim to infer hydrostatic curves, operational draft ranges, and more. The ultimate goal is to confirm the possibility of directly calculating the initial stability of small vessels.

• 대한조선학회논문집
• /
• 제48권1호
• /
• pp.33-41
• /
• 2011

For the assessment of ultimate longitudinal strengths of damaged hull girders, it is preliminarily necessary to determine the extents and locations of the damages due to severe accidents. This paper deals with the estimation of the damages from collisions and groundings of large-sized vessels where deterministic and probabilistic approaches are investigated. Deterministic damages estimated from MARPOL(or ICLL), ABS and DNV are compared with probabilistic damages from IMO guideline and some references including damage statistic data. Damages from MARPOL show largest one among all the investigated damage estimation, since it was developed not for the residual strength of hull girder but for the damage stability calculation. IMO guideline with high level probability of damage(eg. 95% probability level) also forecasts even severer damage extents than MARPOL. On the other hand, assuming average probability level of damage, the calculated damage sizes are around the one from deterministic approaches.

• 한국항해항만학회지
• /
• 제44권3호
• /
• pp.264-274
• /
• 2020

로로 페리선은 급선회 시 선박의 선미부 객실의 증개축으로 인한 무게중심 상승, 과도한 화물적재, 발라스트 부족 등으로 인한 복원성 결여 및 고박 부실 등의 여러 가지 원인으로 전복되어 해저에 침몰하였다. 이 연구의 목적은 유체-구조 연성(Fluid-Structure Interaction; FSI) 해석기법을 이용하여 급선회에 따른 빠른 침수 및 전복에 이어 침몰사고로 진척된 원인을 과학적이고 정확하게 규명하고 분석하는 것이다. 이를 위해 사고 당시의 동영상과 사진들을 분석하여 시간에 따른 선박의 정확한 자세를 구현하고, 이에 따른 화물 이동과 선체 외부의 해수 유입구와 선체 내부에서의 유입된 해수의 이동 경로에 따른 해수 유입량을 실선 부양 시뮬레이션 및 유체정역학적 특성치 프로그램을 사용하여 정확히 검증하여 실선 침수·침몰 시뮬레이션을 수행하여 사고원인을 정확하고 객관적으로 규명하고자 하였다.

• 한국항해항만학회지
• /
• 제41권1호
• /
• pp.1-8
• /
• 2017

선체의 비선형적 동요현상은 선박의 감항성 확보와 관련하여 최근 활발하게 연구가 이루어지는 분야들 중 하나이다. 본 연구에서는 고차 스펙트럼 해석방법들 중 하나인 바이스펙트럼 해석방법과 바이코히어런스 해석방법을 적용하여 선체의 비선형적인 동요 현상을 해석하였다. 본 연구를 통해 기존에 알려진 추파상황에서의 비선형적 선체 종동요 현상과 더불어 추사파 및 우현 횡파 상황에서도 선체 종동요의 비선형 위상 동조 현상이 일어나는 것을 확인하였다. 또한, 바이코히어런스 방법을 통해 주파수간 비선형적 간섭현상을 수치화 하여 주파수 대역별로 위상 동조 현상을 비교할 수 있었다. 이를 통해 선체 종동요의 파워스펙트럼상의 피크 주파수 이외의 주파수 대역에서 비선형적 위상결합이 더 강하게 일어난다는 사실을 확인하였다. 이에 더하여, 바이코히어런스 해석방법은 정규화 방법에 크게 영향을 받지 않는 다는 사실 또한 확인하였다.

• 한국CDE학회논문집
• /
• 제21권1호
• /
• pp.90-98
• /
• 2016

When ships and offshore plants are flooded or the floating crane is equipped with a heavy object, these floating structures are excessively inclined. In this case, immersion, heel, and trim affecting the hydrostatic restoration performance are very large and are coupled each other. In this paper, in order to calculate a static equilibrium position of floating structures with excessive inclination, the nonlinear governing equations were constructed by sequential linearization. In the governing equation, the immersion, heel, and trim are fully coupled, and the equations are represented using a plane area, a primary moment, and a moment of inertia of the water plane area. Therefore, it is possible to calculate the additional factor related the water plane area for estimating stability. Position and orientation of the floating structure are obtained by iterative calculation. The calculated results are compared with the previous studies in the aspect to the performance and the accuracy.

• 수산해양기술연구
• /
• 제59권1호
• /
• pp.1-8
• /
• 2023

In this study, the stability of fishing boat inducing the change of fishing lamp in accordance with the installation of induction lamp in comparison with metal halide lamp was investigated. Inclining test for 8.55 ton class of hair-tail angling fishing boat was performed in order to find a GM and light weight. A stability calculation of the target fishing boat on the basis of KST-SHIP program was evaluated. The stability of the fishing boat with a metal halide lamp such as induction lamp according to the result obtained by the inclining test is slightly different, and the stability is not so much affected. Due to the induction lamp installation, the wind area increased by about 3.178 m². Before installing the induction fishing lamp, G₀M was found to be 0.209 at full load departure and 0.296 at departure from fishing ground. After installing the induction lamp, the full load departure condition is 0.178 and the fishing ground departure condition is 0.260. The G₀M value before and after installation of the induction fishing lamp shows a difference of about 3% at the full load departure condition. The value of the critical angle of inclination definition showed a difference of about 16%. Despite these differences, it is lower than the regulations; it was confirmed that there will be no significant difference unless it is in an overloaded state.

• 해양환경안전학회지
• /
• 제22권6호
• /
• pp.654-659
• /
• 2016

정기적으로 운행하던 여객선 세월호가 소각도 변침 중에 급격히 횡경사되면서 전복하는 사고가 최근 발생하였다. 선박의 횡경사가 발생 원인에 따라 Heel, List, Loll로 구분되어 그 원인에 따라 적절히 대응해야 함에도 불구하고 음의 복원력에 의한 횡경사(Loll)에 대한 항해사들의 인식이 매우 부족하다. 이에 본 연구에서는 음의 복원력에 의한 횡경사에 대한 개념, 발생과정 및 횡경사각 산정법을 고찰하고, 박스형 모형선을 이용한 수조 실험을 통해 실제 횡경사각의 발생과 음의 복원력 정도에 따른 횡경사각의 크기를 이론식과 비교 검증하였다. 그 결과, 실험값은 이론식에 의한 횡경사각 계산값과 잘 일치하였으며, 음의 복원력에 의한 횡경사의 특성으로서 좌현과 우현에서 동일한 각도의 횡경사가 발생하였다. 본 연구를 통하여 음의 복원력을 가진 선박의 거동에 관한 인식이 확대되고 과거 원인이 불명확한 전복사고의 원인분석에 참조되길 기대한다. 향후 음의 복원력에 의한 횡경사에서의 부적절한 대응으로 전개될 수 있는 선박의 거동에 관한 실험연구 및 사례연구가 필요하다고 사료된다.

• 수산해양기술연구
• /
• 제51권4호
• /
• pp.520-526
• /
• 2015

A tragic disaster happened by capsizing O-Ryong 501 trawler at Western Bering Sea in 1st, Dec. 2014. The disaster was caused by the severe weather and the long deferred escape from the storm in fully developed high sea. Lots of sea water from poop deck rushed into the fish ponder with fishes all together after hauling net and then remove the fishes from codend. The vessel became to incline to the one side caused by the weight and the free surface effect of flood sea waters and fishes at initial stage. In spite of crews all effort to discharge the waters, but the work was not achieved successfully. For the worse thing, the order of abandon ship was issued too late. After all, the ship capsized and sank, then almost crews became to the victims of the casualty including captain. In this paper, author carried out restrictively the calculation of dynamic factors influenced on the disaster including the weather condition and effects of the flood sea waters, and found out that the most important causes of the disaster were the decrease of stabilities, GM was decreased from 0.9m to 0.08 m, and the high waves which led to the vessel disaster.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.385-390
• /
• 2003

Recently, use of Continuous Welded rail(CWR) is increased for structural, economical reason but new problem is caused accordingly and phenomenon that give threat in traveling by ship stability of train is led. According as rail is prolonged, excessive relative displacement and longitudinal force can happen to rail by temperature change and external force. Specially, buckling or fracture of rail can happen in railroad bridges because relative displacement by bridge and properties of matter difference between rail grows and additional axial force happens to rail by behavior of bridge. According to several study, longitudinal force of rail in bridge is influenced with ballast resistance, elongation length, boundary condition, stiffness of framework. Non-linear behavior of ballast acts by the most important factor in interaction between rail and bridge. Therefore, must consider stiffness of bridge construction with non-linear characteristic of ballast and stiffness of base for accuracy with longitudinal force calculation and analyze. In this study, perform material non-linear analysis for longitudinal force of CWR and three dimensional buckling analysis to decide buckling force.

• 해양환경안전학회지
• /
• 제17권2호
• /
• pp.161-166
• /
• 2011

본 연구에서는 태양전지로 구동되는 전기추진 소형선박을 제안하여 선체의 설계 및 모형선 시험을 행하였다. 선체 모양은 배의 안정성 및 태양과의 수광면적을 고려하여 차타마란형으로 제작하였다. 계산에 의하면 설계 선박의 선속을 5 knots로 할 때 1.1마력으로 충분한 추력이 산출되었으나 실제의 선속은 태양에너지 등 기후조건에 의해 산출된 값보다 약간 낮았다.